CTRON-ENVIRONMENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
27

chEnvFanTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.8.1.12 · 1 row entry · 4 columns
Open in standard view 
A list of fans installed in this chassis.
chEnvFanEntry entry .1.3.6.1.4.1.52.4.1.1.8.1.12.1
A slot entry containing objects for a particular
module.
Indexes
chEnvFanID
Column Syntax OID
chEnvFanID mandatory
A unique value, in the range between 1 and and the
value of chEnvNumFans.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.1.12.1.1
chEnvFanStatus mandatory
This object reflects the status of the chassis fan.
Enumeration
Enumerated Values:
1unknown
2normal
3testing
4slow
5inoperative
6off
 .1.3.6.1.4.1.52.4.1.1.8.1.12.1.2
chEnvFanAdmin mandatory
This object is used to select the operational mode of the
fan. If the value is set to 1 (auto) then fan speed is
based on temperature. If the value is set to 3 (testing)
then value will return to it's previous value …
Enumerationr/w
Enumerated Values:
1autoMode
2fullSpeed
3testingMode
 .1.3.6.1.4.1.52.4.1.1.8.1.12.1.3
chEnvFanSpeed mandatory
The fan speed expressed as a percentage of the maximum
fan speed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.1.12.1.4

boardEnvSlotTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.8.2.1 · 1 row entry · 13 columns
Open in standard view 
A list of networking modules installed in this chassis.
boardEnvSlotEntry entry .1.3.6.1.4.1.52.4.1.1.8.2.1.1
A slot entry containing objects for a particular
module.
Indexes
boardEnvSlotID
Column Syntax OID
boardEnvSlotID mandatory
The slot number of a chassis slot in which this board is
installed. This object is similiar to chSlotID in the
Chassis MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.1
boardEnvTemp mandatory
The temperature of the networking board. If this sensor is
broken or not supported, then this object will be set to
zero. The temperature is in degrees Fahrenheit * 10.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.2
boardEnvTempStatus mandatory
This object reflects the status of the board temperature
reading.
Enumeration
Enumerated Values:
1unknown
2cold
3cool
4normal
5warm
6hot
7inoperative
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.3
boardEnvTempRelStatus mandatory
This object reflects the status of the board temperature
reading relative to the ambient temperature.
Enumeration
Enumerated Values:
1unknown
2normal
3warm
4hot
5inoperative
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.4
boardEnvShutdownAdmin mandatory
This object enables or disables the auto shutdown due
to a temperature condition.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.5
boardEnvTempHot mandatory
The temperature value above which the board temperature
is deemed to be hot.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.6
boardEnvTempWarm mandatory
The temperature value above which the board temperature
is deemed to be warm, if it is below or equal the hot
value.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.7
boardEnvTempCool mandatory
The temperature value below which the board temperature
is deemed to be cool, if it is above or equal the cold
value.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.8
boardEnvTempCold mandatory
The temperature value below which the board temperature
is deemed to be cold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.9
boardEnvTempRelHot mandatory
The temperature value above ambient at which the board
temperature is deemed to be hot relative to ambient.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.10
boardEnvTempRelWarm mandatory
The temperature value above ambient at which the board
temperature is deemed to be warm relative to ambient, if
it is below the relative hot value of boardEnvTempRelHot.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.11
boardEnvTempMaxFanRelHot mandatory
The temperature value above ambient at which the board
temperature is deemed to be hot relative to ambient, with
all fans in the chassis running at there maximum speed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.12
boardEnvTempMaxFanRelWarm mandatory
The temperature value above ambient at which the board
temperature is deemed to be warm relative to ambient, if
it is below the relative hot value of boardEnvTempMaxFanRelHot,
with all fans in the chassis running at th…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.2.1.1.13

psEnvSlotTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.8.3.1 · 1 row entry · 10 columns
Open in standard view 
A list of networking modules installed in this chassis.
psEnvSlotEntry entry .1.3.6.1.4.1.52.4.1.1.8.3.1.1
A slot entry containing objects for a particular
module.
Indexes
psEnvSlotID
Column Syntax OID
psEnvSlotID mandatory
The slot number of a chassis slot in which this power supply
is installed. An unique value, in the range between 1 and
and the value of chNumSlots. This object is similiar to
chSlotID in the Chassis MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.1
psEnvTemp mandatory
The temperature of the power supply. If this sensor is
broken or not supported, then this object will be set to
zero. The temperature is in degrees Fahrenheit * 10.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.2
psEnvTempStatus mandatory
This object reflects the status of the power supply
temperature reading.
Enumeration
Enumerated Values:
1unknown
2cold
3cool
4normal
5warm
6hot
7inoperative
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.3
psEnvTempHot mandatory
The temperature value above which the power supply
temperature is deemed to be hot.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.4
psEnvTempWarm mandatory
The temperature value above which the power supply
temperature is deemed to be warm, if it is below or
equal the hot value.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.5
psEnvTempCool mandatory
The temperature value below which the power supply
temperature is deemed to be cool, if it is above or
equal the cold value.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.6
psEnvTempCold mandatory
The temperature value below which the power supply
temperature is deemed to be cold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.7
psEnvFanStatus mandatory
This object reflects the status of the chassis fan.
Enumeration
Enumerated Values:
1unknown
2normal
3testing
4slow
5inoperative
6off
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.8
psEnvFanAdmin mandatory
This object is used to select the operational mode of the
fan. If the value is set to 1 (auto) then fan speed is
based on temperature. If the value is set to 3 (testing)
then value will return to it's previous value …
Enumerationr/w
Enumerated Values:
1autoMode
2fullSpeed
3testingMode
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.9
psEnvFanSpeed mandatory
The fan speed expressed as a percentage of the maximum
fan speed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.8.3.1.1.10