CTRON-CDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

ctCDPNeighborTable

table
.1.3.6.1.4.1.52.4.1.2.19.1.3 · 1 row entry · 10 columns
Open in standard view 
The CommonNeighborTable holds all known neighbors speaking
cdp protocols.
ctCDPNeighborEntry entry .1.3.6.1.4.1.52.4.1.2.19.1.3.1
An entry containing objects pertaining to
neighbor devices speaking CDP protocols.
Indexes
ctCDPNeighborTimeMark IF-MIBifIndex ctCDPNeighborMAC
Column Syntax OID
ctCDPNeighborTimeMark
A TimeFilter for this entry as defined in RFC 2021.
RMON2-MIBTimeFilter
Textual Convention: RMON2-MIBTimeFilter Unsigned32
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.1
ctCDPNeighborMAC
The interface mac address of neighboring entity.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.2
ctCDPNeighborIP
The IP address of SNMP agent on neighboring entity from which
corresponding data for this port may be obtained. In the case
of unnumbered IP Interfaces, this may not be the same as the
port.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.3
ctCDPNeighborPort
The ifIndex of the remote port. Note, there may not be an IP
Interface associated with this port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.4
ctCDPNeighborType
The type of entity. This value is used to determine the
general type of the object or service connected to a given port.
In general, it is better to use system group sysServices to
obtain an object's functionality.
Enumeration
Enumerated Values:
1secureFastSwitch
2dot1qSwitch
3router
4dot1dBridge
5vlanManager
6dnsServer
7dhcpServer
8dnsDhcpServer
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.5
ctCDPNeighborChassisMAC
The MAC Address of the chassis in architectures
where many manageable elements exist within a
given chassis. If no containing chassis exists,
exists, this value must be set to 000000:000000
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.6
ctCDPNeighborChassisIP
The IP address of the chassis itself. If no containing chassis
exists, this value must be set to 0.0.0.0
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.7
ctCDPNeighborDescription
A textual description of the neighbor. It
should contain operator diagnostic information
similar to sysDescr: system type, firmware version...
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.8
ctCDPNeighborPortName
The value of object ifName of the neighbor's port.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.9
ctCDPNeighborCapability
The current capabilities of the neighbor port.
CTCDPCapability
Textual Convention: CTCDPCapability Enumeration
Type Values:
1igmp
2rip
3bgp
4ospf
5dvmrp
6ieee8021q
7gvrp
8gmrp
9igmpSnoop
10dhcpServer
11dnsServer
12activeDirectory
 .1.3.6.1.4.1.52.4.1.2.19.1.3.1.10

ctCDPPortTable

table
.1.3.6.1.4.1.52.4.1.2.19.2.3 · 1 row entry · 2 columns
Open in standard view 
This table shows enable/disable CDP status for each port.
ctCDPPortTableEntry entry .1.3.6.1.4.1.52.4.1.2.19.2.3.1
Each entry is indicative of a particuliar port in the system.
Indexes
ctCDPPort
Column Syntax OID
ctCDPPort
The ifIndex for a physical port. ifConnectorPresent is true(1)
defines a physical port on which cdp pdus will be emitted.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.52.4.1.2.19.2.3.1.1
ctCDPPortStatus
The current state administrative of cdp on a physical port.
The ability to enable and disable the sending of CDP pdu's
on a per port basis is controlled here.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3autoEnable
 .1.3.6.1.4.1.52.4.1.2.19.2.3.1.2