ctCDPNeighborCapability
CTRON-CDP-MIB ·
.1.3.6.1.4.1.52.4.1.2.19.1.3.1.10
Object
column
CTCDPCapability
The current capabilities of the neighbor port.
Context
- MIB
- CTRON-CDP-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.19.1.3.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ctCDPNeighborEntry
- Table
- ctCDPNeighborTable
- Siblings
- 9
Syntax
CTCDPCapability
- Source
- CTCDPCapability
- Base type
Enumeration
Values & Constraints
Type Values
1 | igmp |
2 | rip |
3 | bgp |
4 | ospf |
5 | dvmrp |
6 | ieee8021q |
7 | gvrp |
8 | gmrp |
9 | igmpSnoop |
10 | dhcpServer |
11 | dnsServer |
12 | activeDirectory |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctCDPNeighborTimeMark A TimeFilter for this entry as defined in RFC 2021. | column | RMON2-MIBTimeFilter | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.1 |
| ctCDPNeighborMAC The interface mac address of neighboring entity. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.2 |
| ctCDPNeighborIP The IP address of SNMP agent on neighboring entity from which
corresponding data for this port may be obtained. In the case
of unnumbered IP Interfaces, this may not be the same a… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.3 |
| ctCDPNeighborPort The ifIndex of the remote port. Note, there may not be an IP
Interface associated with this port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.4 |
| ctCDPNeighborType The type of entity. This value is used to determine the
general type of the object or service connected to a given port.
In general, it is better to use system group sysServices t… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.5 |
| ctCDPNeighborChassisMAC The MAC Address of the chassis in architectures
where many manageable elements exist within a
given chassis. If no containing chassis exists,
exists, this value must be set to … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.6 |
| ctCDPNeighborChassisIP The IP address of the chassis itself. If no containing chassis
exists, this value must be set to 0.0.0.0 | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.7 |
| ctCDPNeighborDescription A textual description of the neighbor. It
should contain operator diagnostic information
similar to sysDescr: system type, firmware version... | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.8 |
| ctCDPNeighborPortName The value of object ifName of the neighbor's port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.52.4.1.2.19.1.3.1.9 |