CTRON-AP3000-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

149

macFilterTable

table deprecated

.1.3.6.1.4.1.52.4.13.2.1 · 1 row entry · 4 columns

Open in standard view

Table of status information about
each configured MAC Filtering Entry.

macFilterEntry entry .1.3.6.1.4.1.52.4.13.2.1.1

An entry in the table, containing information
about configuration of MAC Filter.

Indexes

macFilterIndex

Column Syntax OID

macFilterIndex deprecated

Filter index.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.2.1.1.1

macFilterAddress deprecated

This values indicates the MAC address of the
MAC Filter entry.

MacAddressr/w

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.52.4.13.2.1.1.2

macFilterAllowedToGo deprecated

The administrative allow/deny state for
that specified MAC Filter Entry.

Enumerationr/w

Enumerated Values:

1	allow
2	deny

.1.3.6.1.4.1.52.4.13.2.1.1.3

macFilterOpeStatus deprecated

This object indicates the status of this entry.
other(0) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
valid(1) - this value to indicate this…

Enumerationr/w

Enumerated Values:

0	other
1	valid
2	invalid
3	create

.1.3.6.1.4.1.52.4.13.2.1.1.4

apvMacFilterOperateTable

table

.1.3.6.1.4.1.52.4.13.2.3 · 1 row entry · 2 columns

Open in standard view

The Table used to manage the function in
MAC Filter Table.

apvMacFilterOperateEntry entry .1.3.6.1.4.1.52.4.13.2.3.1

An entry in the table, containing information
about configuration in one VAP of the AP.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

apvMacFilterPermission

This values indicates the Permission on all the active
filter entry for each Vap. The negative permission will
be applied on any inactive entry or any MAC that is not
in the table.

Enumerationr/w

Enumerated Values:

1	allowed
2	denied

.1.3.6.1.4.1.52.4.13.2.3.1.1

apvMacFilterAddressToAdd

This values indicates the MAC address to be added to the
local MAC filter table as an active entry for each Vap.

OctetStringr/w

.1.3.6.1.4.1.52.4.13.2.3.1.2

apvMacFilterTable

table

.1.3.6.1.4.1.52.4.13.2.4 · 1 row entry · 3 columns

Open in standard view

Table of status information about
each configured MAC Address Filtering Entry.

apvMacFilterEntry entry .1.3.6.1.4.1.52.4.13.2.4.1

An entry in the table, containing information
about configuration in one radio of the AP.
MacFilterEntry is created and managed using
localMACFilterMgnt Table.

Indexes

RFC1213-MIBifIndex apvMacFilterIndex

Column Syntax OID

apvMacFilterIndex

MAC Filter index in each VAP.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.2.4.1.1

apvMacFilterAddress

This values indicates the MAC address of the
filter entry.

MacAddress

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.52.4.13.2.4.1.2

apvMacFilterActivity

This value indicates the Activity of the MAC table
entry by the filter permission. If allow(1), the filter
permission will be applied to the MAC address.
If denied(2), the filter permission will not be applied
to the MA…

Enumerationr/w

Enumerated Values:

1	allow
2	denied
3	deleteEntry

.1.3.6.1.4.1.52.4.13.2.4.1.3

qosMACTypeTable

table

.1.3.6.1.4.1.52.4.13.3.2 · 1 row entry · 4 columns

Open in standard view

Table of status information about
each configured MAC Type Entry for the QoS Management.

qosMACTypeEntry entry .1.3.6.1.4.1.52.4.13.3.2.1

An entry in the table, containing information
about configuration MAC Type Entry for the QoS Management.

Indexes

qosMACTypeIndex

Column Syntax OID

qosMACTypeIndex

Qos MAC Type index.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.3.2.1.1

qosMACTypeAddress

This values indicates the MAC address of that specified
index in the entry.

MacAddressr/w

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.52.4.13.3.2.1.2

qosMACTypePriority

This values indicates the level of priority of that specified
MAC Address in entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.13.3.2.1.3

qosMACTypeOpeStatus

Enumerationr/w

Enumerated Values:

0	other
1	valid
2	invalid
3	create

.1.3.6.1.4.1.52.4.13.3.2.1.4

qosEtherTypeTable

table

.1.3.6.1.4.1.52.4.13.3.3 · 1 row entry · 4 columns

Open in standard view

Table of status information about
each configured Ether Type Entry for QoS Management.

qosEtherTypeEntry entry .1.3.6.1.4.1.52.4.13.3.3.1

An entry in the table, containing information
about configuration Ether Type for QoS Management.

Indexes

qosMACTypeIndex

Column Syntax OID

qosEtherTypeIndex

Qos Ether Type index in the table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.13.3.3.1.1

qosEtherTypeHexValue

The Hex Value to indicate the type of Ether of that specified
index in the entry.

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.52.4.13.3.3.1.2

qosEtherTypePriority

This values indicates the level of priority of that specified
MAC Address in entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.13.3.3.1.3

qosEtherTypeOpeStatus

Enumerationr/w

Enumerated Values:

0	other
1	valid
2	invalid
3	create

.1.3.6.1.4.1.52.4.13.3.3.1.4

linkQualityTable

table

.1.3.6.1.4.1.52.4.13.4.1 · 1 row entry · 4 columns

Open in standard view

Table of status information about
the radio Interface Link Quality Entry.

linkQualityEntry entry .1.3.6.1.4.1.52.4.13.4.1.1

An entry in the table, containing information
about configuration of the radio Interface Link Quality.

Indexes

linkQualityRadioIndex linkQualityStaIndex

Column	Syntax	OID
linkQualityRadioIndex This is the value to define the index of the radio interface.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.52.4.13.4.1.1.1`
linkQualityStaIndex This is value to define the index of link station.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.52.4.13.4.1.1.2`
linkQualityStaMacAddress This values indicates the MAC address of the link station.	MacAddress Textual Convention: MacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.52.4.13.4.1.1.3`
linkQualityStaRssi This values indicates the percentage RSSI of the link station.	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.13.4.1.1.4`

apSnmpTrapDestinationTable

table

.1.3.6.1.4.1.52.4.13.5.3 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of each trap receiving server.

apSnmpTrapDestinationEntry entry .1.3.6.1.4.1.52.4.13.5.3.1

An entry in the table, containing information
about configuration of one trap receiving server.

Indexes

apSnmpTrapDestinationIndex

Column Syntax OID

apSnmpTrapDestinationIndex

Index of the Trap Destination Table.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.52.4.13.5.3.1.1

apSnmpTrapDestinationCommunity

The SNMP Trap Community

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.52.4.13.5.3.1.2

apSnmpTrapDestinationIP

The IP address of the trap receiving server.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.52.4.13.5.3.1.3

apSnmpTrapDestinationState

This value indicates whether the trap receiving server is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.5.3.1.4

apRadioSecurityTable

table

.1.3.6.1.4.1.52.4.13.7.1 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
configuration of each radio in terms of security settings.

apRadioSecurityEntry entry .1.3.6.1.4.1.52.4.13.7.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

apRadioSecurityIndex

Column Syntax OID

apRadioSecurityIndex

Radio Index for security settings.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.7.1.1.1

apRadioSecurityWEPAuthType

This value indicates the type of WEP authentication in use for this radio interface.
opensystem(0) Set authentication open
sharedkey(1) Set authentication shared
wpa(2) Set WPA Mode
wpaps…

Enumerationr/w

Enumerated Values:

0	opensystem
1	sharedkey
2	wpa
3	wpapsk
4	wpawpa2mixed
5	wpawpa2pskmixed
6	wpa2
7	wpa2psk

.1.3.6.1.4.1.52.4.13.7.1.1.2

apRadioSecuritySharedKeyLen

This value indicates the shared key length for this radio interface.

Enumeration

Enumerated Values:

0	none
1	sixtyFour
2	oneHundredTwentyEight
3	oneHundredFiftyTwo

.1.3.6.1.4.1.52.4.13.7.1.1.3

apRadioSecurityWPAMode

This value indicates the state of WPA for this radio interface.

Enumerationr/w

Enumerated Values:

0	supported
1	required
2	notSupported

.1.3.6.1.4.1.52.4.13.7.1.1.4

apRadioSecurityWPAKeyType

This value indicates the type of WPA Key Management in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	dot1x
1	presharedkey

.1.3.6.1.4.1.52.4.13.7.1.1.5

apRadioSecurityWPACipher obsolete

This value indicates the type of WPA Cipher in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	wep
1	tkip
2	aes

.1.3.6.1.4.1.52.4.13.7.1.1.6

apRadioSecurityWPAPSKType

This value indicates the type of WPA Pre Shared Key in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	hex
1	alphanumeric

.1.3.6.1.4.1.52.4.13.7.1.1.7

apRadioSecurityWPAPSK

This value indicates WPA Pre Shared Key in use for this radio interface.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.52.4.13.7.1.1.8

apRadioSecurityWEPKeyType

This value indicates the type of WEP Key in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	hexadecimal
1	alphanumeric

.1.3.6.1.4.1.52.4.13.7.1.1.9

apRadioSecurityWEPEnabled

This value indicates whether WEP is enabled.

TruthValuer/w

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.13.7.1.1.10

apRadioSecurityWPACipherSuite

This value indicates the type of WPA Cipher Suite in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	aesccmp
1	tkip
2	wep

.1.3.6.1.4.1.52.4.13.7.1.1.11

apRadioApSecurityWPAPreAuthentication

Whether Pre-Authentication is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.7.1.1.12

apRadioApSecurityWPAPmksaLifetime

The number (in minutes) for Pmksa-Lifetime.

Integer32r/w

Constraints:
range: 0-14400

.1.3.6.1.4.1.52.4.13.7.1.1.13

enterpriseApRadioTable

table

.1.3.6.1.4.1.52.4.13.8.2 · 1 row entry · 18 columns

Open in standard view

Table of descriptive and status information about
configuration of each radio.

enterpriseApRadioEntry entry .1.3.6.1.4.1.52.4.13.8.2.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseApRadioIndex

Column Syntax OID

enterpriseApRadioIndex

Radio Index for configuration.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.8.2.1.1

enterpriseApRadioAutoChannel

This value indicates whether auto channel selection is enabled or not
for this radio interface

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.2.1.2

enterpriseApRadioTransmitPower

This value indicates the transmit power for this radio interface.

Enumerationr/w

Enumerated Values:

1	full
2	half
3	quarter
4	eighth
5	min

.1.3.6.1.4.1.52.4.13.8.2.1.3

enterpriseApRadioTurboMode

This value indicates whether turbo mode is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	invalid

.1.3.6.1.4.1.52.4.13.8.2.1.4

enterpriseApRadioDataRate

This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The auto
setting will attempt to set the best …

Enumerationr/w

Enumerated Values:

1	oneMbps
2	twoMbps
5	fiveAndHalfMbps
6	sixMbps
9	nineMbps
11	elevenMbps
12	twelveMbps
18	eighteenMbps
24	twentyFourMbps
36	thirtySixMbps
48	fourtyEightMbps
54	fiftyFourMbps
255	auto

.1.3.6.1.4.1.52.4.13.8.2.1.5

enterpriseApRadioGMode

This value indicates the radio mode for the 802.11g radio.
This setting is only valid for the 802.11g interface.

Enumerationr/w

Enumerated Values:

1	bOnly
2	gOnly
3	bg
4	invalid

.1.3.6.1.4.1.52.4.13.8.2.1.6

enterpriseApRadioAntennaMode

This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
both(1) means use both built-in antennas,
left(2) means use left side.
right(3) means use right s…

Enumerationr/w

Enumerated Values:

1	both
2	left
3	right
4	invalid

.1.3.6.1.4.1.52.4.13.8.2.1.7

rogueApState

This value is used to enable/disable Rogue Ap Detection for
this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.2.1.8

rogueApInterval

How often to scan for Rogue Aps. The interval in minutes, with default
of 720(minutes).

Integer32r/w

Constraints:
range: 30-10080

.1.3.6.1.4.1.52.4.13.8.2.1.9

rogueApDuration

How long to scan each channel (in milliseconds). A longer duration will yield more
complete results. A shorter duration will allow clients a better chance
of remaining connected. Default value is 350(milliseconds).

Integer32r/w

Constraints:
range: 200-1000

.1.3.6.1.4.1.52.4.13.8.2.1.10

rogueApScanNow

When writing the value to enable, the AP will trigger the Rouge AP scan function.
The value will always return disable(2).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.2.1.11

enterpriseApRadioAntennaModeControl

This value indicates which antenna is in use for the radio Interface.
The values are interpreted as follows:
fixed(1) specify to use built-in antennas,
external(2) specify to use one external antenna.

Enumeration

Enumerated Values:

1	fixed
2	external

.1.3.6.1.4.1.52.4.13.8.2.1.12

enterpriseApRadioFixedAntennaType

This value indicates which antenna type is in use
as the fixed antenna is selected.

Enumerationr/w

Enumerated Values:

1	diversity
2	left
3	right

.1.3.6.1.4.1.52.4.13.8.2.1.13

enterpriseApRadioAntennaID

This value indicates which antenna ID will be in use for the radio Interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.13.8.2.1.14

enterpriseApRadioMulticastDataRate

This value indicates the data rate for mc/bc packets from this
radio interface. sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18),
twentyFourMbps(24), thirtySixMbps(36), fortyEightMbps(48), and fiftyFourMbps(54)…

Enumerationr/w

Enumerated Values:

1	oneMbps
2	twoMbps
5	fiveAndHalfMbps
6	sixMbps
9	nineMbps
11	elevenMbps
12	twelveMbps
18	eighteenMbps
24	twentyFourMbps
36	thirtySixMbps
48	fortyEightMbps
54	fiftyFourMbps

.1.3.6.1.4.1.52.4.13.8.2.1.15

enterpriseApRadioAutoDataRate

This value indicates whether automated data rate is enabled or not
for this radio interface

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.2.1.16

enterpriseApRadioPreamble

This value indicates the preamble length of 11g.
The values are interpreted as follows:
long(1) sets the preamble length to long.
short(2) sets the preamble length to short.
invalid(3) means not sup…

Enumerationr/w

Enumerated Values:

1	long
2	short
3	invalid

.1.3.6.1.4.1.52.4.13.8.2.1.17

enterpriseApRadioSWRetryMode

This value indicates whether SW retty mode is enabled or not
for this radio interface

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.2.1.18

enterpriseApVapRadioTable

table

.1.3.6.1.4.1.52.4.13.8.3 · 1 row entry · 7 columns

Open in standard view

Table of descriptive and status information about
configuration of each Vap radio.

enterpriseApVapRadioEntry entry .1.3.6.1.4.1.52.4.13.8.3.1

An entry in the table, containing information
about configuration of one Vap radio of the AP.

Indexes

enterpriseApVapRadioIndex

Column Syntax OID

enterpriseApVapRadioIndex

Radio Index for configuration.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.8.3.1.1

enterpriseApVapRadioState

This value indicates the state of the radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.3.1.2

enterpriseApVapRadioSecureAccess

This value indicates whether secure access is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.8.3.1.3

enterpriseApVapRadioMaxAssoc

This value indicates the max number of clients allowed on this radio interface.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.52.4.13.8.3.1.4

enterpriseApVapRadioTransmitKey

This value indicates default transmit key in use for this radio interface.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.52.4.13.8.3.1.5

enterpriseApVapRadioDescription

This value indicates the description for this radio interface.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.52.4.13.8.3.1.6

enterpriseApVapRadioDefefaultPriority

This values indicates the level of default priority of that specified
VAP in entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.13.8.3.1.7

enterpriseApRadioWdsTable

table

.1.3.6.1.4.1.52.4.13.8.4 · 1 row entry · 2 columns

Open in standard view

Table of configuration information for Wds for each
Radio interface.

enterpriseApRadioWdsEntry entry .1.3.6.1.4.1.52.4.13.8.4.1

An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable). The table does not contain the…

Indexes

enterpriseApRadioIndex

Column Syntax OID

wdsApRole

This value indicates the role of the Ap for this radio,
roleAp(1): AP operation.
roleBridgeMaster(2): Root-Bridge mode.
roleBridge(3): Bridge Mode.

Enumerationr/w

Enumerated Values:

1	roleAp
2	roleBridgeMaster
3	roleBridge

.1.3.6.1.4.1.52.4.13.8.4.1.1

wdsApAckTimeout

This value indicates the WDS Ack timeout for this radio in us,
and the following values can be set to the system:
0 Set wireless Ack Timeout as system default
20 0 to 1 miles: Ack timeout is 20 us
40 1 …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.13.8.4.1.2

enterpriseApRadioWdsPeerTable

table

.1.3.6.1.4.1.52.4.13.8.5 · 1 row entry · 3 columns

Open in standard view

Table of configuration information for Wds Peers for each
Radio interface.

enterpriseApRadioWdsPeerEntry entry .1.3.6.1.4.1.52.4.13.8.5.1

An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadi…

Indexes

enterpriseApRadioIndex wdsPeerIndex

Column	Syntax	OID
wdsPeerIndex Peer Index for the radio interface.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.52.4.13.8.5.1.1`
wdsPeerBssid The BSSID for this peer.	OctetStringr/w Constraints: `range: 1-17`	`.1.3.6.1.4.1.52.4.13.8.5.1.2`
wdsPeerRSSI This value indicates the RSSI value of the WDS peer link.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.13.8.5.1.3`

enterpriseApRadioWEPKeysTable

table

.1.3.6.1.4.1.52.4.13.8.6 · 1 row entry · 3 columns

Open in standard view

Conceptual table for WEP default keys.

enterpriseApRadioWEPKeysEntry entry .1.3.6.1.4.1.52.4.13.8.6.1

An Entry (conceptual row) in the WEP Default Keys Table.
A collection of objects containing information used to
determine if a WEPkey as been defined and if so, the
value of the WEPkey.

Indexes

enterpriseApRadioIndex enterpriseApRadioWEPKeysIndex

Column Syntax OID

enterpriseApRadioWEPKeysIndex

WEP Key Index for the radio interface.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.52.4.13.8.6.1.1

enterpriseApRadioWEPKeyType

status of the WEP Key type

Enumeration

Enumerated Values:

1	hexadecimalKey
2	alphanumericKey
3	otherKey

.1.3.6.1.4.1.52.4.13.8.6.1.2

enterpriseApRadioWEPKeyLength

status of the WEP Key Length.

Enumeration

Enumerated Values:

1	keyLength64Bit
2	keyLength128Bit
3	keyLength152Bit
4	keyLengthOther

.1.3.6.1.4.1.52.4.13.8.6.1.3

enterpriseApRadioAvAntennaListTable

table

.1.3.6.1.4.1.52.4.13.8.7 · 1 row entry · 3 columns

Open in standard view

Conceptual table for Available Antenna List used in the Radio.

enterpriseApRadioAvAntennaListEntry entry .1.3.6.1.4.1.52.4.13.8.7.1

An Entry (conceptual row) in the Antenna List Table.
A collection of objects containing information used to
show if an Antenna as been defined and if so, the
value of the antenna Id.

Indexes

enterpriseApRadioIndex enterpriseApRadioAvAntennaIndex

Column	Syntax	OID
enterpriseApRadioAvAntennaIndex Available Antenna List Index for the radio interface.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.52.4.13.8.7.1.1`
enterpriseApRadioAvAntennaId Available antenna Id in the entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.13.8.7.1.2`
enterpriseApRadioAvAntennaDesc The description of the antenna ID.	OctetString Constraints: `range: 0-80`	`.1.3.6.1.4.1.52.4.13.8.7.1.3`

enterpriseApRadioAvChannelListTable

table

.1.3.6.1.4.1.52.4.13.8.8 · 1 row entry · 2 columns

Open in standard view

Conceptual table for Available Channel List used in the Radio.

enterpriseApRadioAvChannelListEntry entry .1.3.6.1.4.1.52.4.13.8.8.1

An Entry (conceptual row) in the Channel List Table.
A collection of objects containing information used to
show if a Channel No. as been defined and if so, the
value of the Channel No.

Indexes

enterpriseApRadioIndex enterpriseApRadioAvChannelIndex

Column	Syntax	OID
enterpriseApRadioAvChannelIndex Channel List Index for the radio interface.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.52.4.13.8.8.1.1`
enterpriseApRadioAvChannelNo Available channel number in the entry	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.13.8.8.1.2`

enterpriseApFilterProtocolTable

table

.1.3.6.1.4.1.52.4.13.10.4 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of the filter protocol table.

enterpriseApFilterProtocolEntry entry .1.3.6.1.4.1.52.4.13.10.4.1

An entry in the filter protocol table, containing information
about configuration of one filter table entry.

Indexes

enterpriseApFilterProtocolIndex

Column Syntax OID

enterpriseApFilterProtocolIndex

Index of the Protocol Filters.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.10.4.1.1

enterpriseApFilterProtocolName

This value indicates the name of the protocol filter. One of
the following:
Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation,
CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL,
Enet_Config_T…

DisplayString

Textual Convention: DisplayString OctetString

.1.3.6.1.4.1.52.4.13.10.4.1.2

enterpriseApFilterProtocolISODesignator

This value indicates the name of the protocol filter.

DisplayString

Textual Convention: DisplayString OctetString

.1.3.6.1.4.1.52.4.13.10.4.1.3

enterpriseApFilterProtocolState

This value indicates whether the protocol filter is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.10.4.1.4

apvFilterControlTable

table

.1.3.6.1.4.1.52.4.13.10.6 · 1 row entry · 3 columns

Open in standard view

Table of the control and status information about
configuration of the filter Control for each Vap.

apvFilterControlEntry entry .1.3.6.1.4.1.52.4.13.10.6.1

An entry in the table, containing information
about configuration of the filter for each Vap of the AP.

Indexes

apvFilterControlIndex

Column Syntax OID

apvFilterControlIndex

Index of the configuration.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.10.6.1.1

apvIBSSFilterControl

This value indicates the local bridge filter(IBSS Relay Filter) setting.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.10.6.1.2

apvAPManageFilterControl

This value indicates the AP management filter setting.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.10.6.1.3

apNativeVlanTable

table

.1.3.6.1.4.1.52.4.13.11.6 · 1 row entry · 4 columns

Open in standard view

Table used to manage the Vlans for each
wireless interface.

apNativeVlanEntry entry .1.3.6.1.4.1.52.4.13.11.6.1

An entry in the table, containing information
about VLAN configuration of one wireless interface.

Indexes

apNativeVlanIfIndex apNativeVlanSsidNumber

Column Syntax OID

apNativeVlanIfIndex

Interface Index of the wireless interface for which
the VLAN is assigned to.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.11.6.1.1

apNativeVlanSsidNumber

Associated Number for Service Set Id (SSID) of the
wireless interface for which the VLAN is assigned to.
Note: This is for future support of multiple SSIDs
per radio interface.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.11.6.1.2

apNativeVlanVlanId

This value indicates the native VLAN Id of the wireless interface associated
with the if index and the SSID number(if it is not 0).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.13.11.6.1.3

apNativeVlanState

This value indicates the Native VLANs state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.11.6.1.4

apAuthenticationServerTable

table

.1.3.6.1.4.1.52.4.13.12.2 · 1 row entry · 9 columns

Open in standard view

Table of descriptive and status information about
configuration of each authentication server.

apAuthenticationServerEntry entry .1.3.6.1.4.1.52.4.13.12.2.1

An entry in the table, containing information
about configuration of one authentication server of the AP.

Indexes

apAuthenticationServerIndex

Column Syntax OID

apAuthenticationServerIndex

Index of the Authentication Server

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.12.2.1.1

apAuthenticationServer

This value indicates the IP address or host name of the authentication server.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.52.4.13.12.2.1.2

apAuthenticationPort

This value indicates the UDP Port used by the authentication server.

Integer32r/w

Constraints:
range: 1024-65535

.1.3.6.1.4.1.52.4.13.12.2.1.3

apAuthenticationKey

This value indicates the shared key used by the authentication server.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.52.4.13.12.2.1.4

apAuthenticationRetransmit

This value indicates the retransmit timer length used by the
authentication server.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.52.4.13.12.2.1.5

apAuthenticationTimeout

This value indicates the Timeout value(sec) used by the
authentication server.

Integer32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.52.4.13.12.2.1.6

apAuthenticationAcctPort

UDP Accounting Port. The valid range is from
1024-65535. A value of 0 means accounting is disabled.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.13.12.2.1.7

apAuthenticationAcctInterimUpdate

The interval between sending accounting
updates.

Integer32r/w

Constraints:
range: 60-86400

.1.3.6.1.4.1.52.4.13.12.2.1.8

apAuthenticationAcctState

This value indicates whether the Accounting Server is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.12.2.1.9

apAuthenticationSupplicantTable

table

.1.3.6.1.4.1.52.4.13.12.3 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of supplicant

apAuthenticationSupplicantEntry entry .1.3.6.1.4.1.52.4.13.12.3.1

An entry in the table, containing information
about configuration of one supplicant.

Indexes

ap8021xSuppIndex

Column Syntax OID

ap8021xSuppIndex

Index of the interface for which this supplicant is
running. Currently only the ethernet interface.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.12.3.1.1

ap8021xSuppState

This object is used to enable or disable the 802.1X supplicant.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.52.4.13.12.3.1.2

ap8021xSuppUser

This value indicates the username for supplicant. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.52.4.13.12.3.1.3

ap8021xSuppPasswd

This value indicates the password for supplicant. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.52.4.13.12.3.1.4

apvAuthenticationSetupTable

table

.1.3.6.1.4.1.52.4.13.12.4 · 1 row entry · 8 columns

Open in standard view

Table of descriptive and status information about
configuration of 8021x for each Vap.

apvAuthenticationSetupEntry entry .1.3.6.1.4.1.52.4.13.12.4.1

An entry in the table, containing information
about configuration of 8021x for each Vap of the AP.

Indexes

apv8021xIndex

Column Syntax OID

apv8021xIndex

Index for configuration.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.12.4.1.1

apv8021xState

This attribute indicates that the Enterprise the state
of the 802.1X authentication algorithm.

Enumerationr/w

Enumerated Values:

0	disabled
1	supported
2	required

.1.3.6.1.4.1.52.4.13.12.4.1.2

apv8021xBroadcastKeyRefreshRate

The number (in minutes) between changing the broadcast key for
802.1X and WPA clients

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.52.4.13.12.4.1.3

apv8021xSessionKeyRefreshRate

The number (in minutes) between changing history keys for
802.1X and WPA clients

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.52.4.13.12.4.1.4

apv8021xReauthenticationTimeout

The number (in minutes) between forcing 802.1X clients to
reauthenticate

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.13.12.4.1.5

apvMACAuthenticationMode

This value indicates the mode of MAC authentication in use.

Enumerationr/w

Enumerated Values:

0	disabled
1	local
2	remote

.1.3.6.1.4.1.52.4.13.12.4.1.6

apvMACAuthenticationTimeout

The number (in minutes) between forcing RADIUS MAC to authenticate.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.13.12.4.1.7

apvMACAuthenticationPasswd

This value indicates the password for MAC RADIUS Authentication. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.52.4.13.12.4.1.8

apWStationSessionTable

table

.1.3.6.1.4.1.52.4.13.13.1 · 1 row entry · 16 columns

Open in standard view

This table list all sessions (wireless stations) status

apWStationSessionEntry entry .1.3.6.1.4.1.52.4.13.13.1.1

An entry in the table, containing information
about status and statistics of the wireless station.

Indexes

apWStationSessionIfIndex apWStationSessionStationAddres

Column Syntax OID

apWStationSessionIfIndex

Interface index for the radio this session is associated
with.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.52.4.13.13.1.1.1

apWStationSessionStationAddres

The unique MAC Address of the station for this session.

MacAddress

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.52.4.13.13.1.1.2

apWStationSessionAuthenticated

Whether the session is authenticated or not.

TruthValue

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.13.13.1.1.3

apWStationSessionAssociated

Whether the session is associated or not. It is rare case that
not associated stations show up in the table.

TruthValue

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.13.13.1.1.4

apWStationSessionIsForwarding

Whether the AP is forwarding the client station traffic (higher level authentication)

TruthValue

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.13.13.1.1.5

apWStationSessionKeyType

The encryption key type used by the station. Note that wpa-wep is not supported

Enumeration

Enumerated Values:

1	none
2	staticWep
3	dynamicWep
4	wpaWep
5	wpaTkip
6	wpaAes

.1.3.6.1.4.1.52.4.13.13.1.1.6

apWStationSessionAssociationId

The internal association identify number

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.13.13.1.1.7

apWStationSessionLastAuthenticatedTime

This is the time in hundredths of a second last time the client
is authenticated. Note that a session may be authenticated multiple times.
The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.8

apWStationSessionAssociatedTime

This is the time in hundredths of a second since the client
associated. The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.9

apWStationSessionLastAssociatedTime

This is the time in hundredths of a second when the client
associated in last session. The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.10

apWStationSessionLastDisassociatedTime

This is the time in hundredths of a second when the client
disassociated in last session. The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.11

apWStationSessionTxPacketCount

This is the number of packets transmitted from the client to the AP. It includes
data, control and management packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.12

apWStationSessionRxPacketCount

This is the number of unicast packets transmitted from the AP to the client.
It includes data, control and management packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.13

apWStationSessionTxByteCount

This is the number of bytes transmitted from the client to the AP. It
includes the bytes of data, control and management packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.14

apWStationSessionRxByteCount

This is the number of unicast bytes transmitted from the AP to
the client. It includes the bytes of data, control and management
packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.13.13.1.1.15

apWStationSessionVlanID

The current VLAN Id used by the station.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.13.13.1.1.16

rogueApDetectionTable

table

.1.3.6.1.4.1.52.4.13.14.1 · 1 row entry · 6 columns

Open in standard view

Table of each AP that has been detected.

rogueApDetectionEntry entry .1.3.6.1.4.1.52.4.13.14.1.1

An entry in the table, containing information
about any AP detected.

Indexes

rogueApIndex

Column	Syntax	OID
rogueApIndex Monotonically increasing index.	Integer32 Constraints: `range: 1-128`	`.1.3.6.1.4.1.52.4.13.14.1.1.1`
rogueApBssid The AP BSSID	OctetString Constraints: `range: 0-6`	`.1.3.6.1.4.1.52.4.13.14.1.1.2`
rogueApSsid The AP SSID	OctetString Constraints: `range: 0-40`	`.1.3.6.1.4.1.52.4.13.14.1.1.3`
rogueApPortNumber Interface index for the radio.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.13.14.1.1.4`
rogueApChannelNumber Channel where Ap detected.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.13.14.1.1.5`
rogueApRSSIValue RSSI for AP detected.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.13.14.1.1.6`

apSyslogServerTable

table

.1.3.6.1.4.1.52.4.13.20.4 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of each syslog server.

apSyslogServerEntry entry .1.3.6.1.4.1.52.4.13.20.4.1

An entry in the table, containing information
about configuration of one syslog server of the AP.

Indexes

apSyslogServerIndex

Column Syntax OID

apSyslogServerIndex

Index of the Syslog Server

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.52.4.13.20.4.1.1

apSyslogServerState

This value indicates whether the syslog server is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52.4.13.20.4.1.2

apSyslogServerIPAddress

This value indicates the IP address of the syslog server.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.52.4.13.20.4.1.3

apSyslogServerPort

This value indicates the UDP Port used by the syslog server.

Integer32r/w

Constraints:
range: 1024-65535

.1.3.6.1.4.1.52.4.13.20.4.1.4

apEventLogTable

table

.1.3.6.1.4.1.52.4.13.21.1 · 1 row entry · 2 columns

Open in standard view

This table is a snapshot of the current event log.

apEventLogEntry entry .1.3.6.1.4.1.52.4.13.21.1.1

An entry in the table, containing one message
from the event log.

Indexes

apEventLogIndex

Column	Syntax	OID
apEventLogIndex Index of the Event Log Message	Integer32 Constraints: `range: 1-128`	`.1.3.6.1.4.1.52.4.13.21.1.1.1`
apEventLogMessage The Event Log Message	OctetString Constraints: `range: 0-256`	`.1.3.6.1.4.1.52.4.13.21.1.1.2`

apWMMControlTable

table

.1.3.6.1.4.1.52.4.13.23.1 · 1 row entry · 1 columns

Open in standard view

Table for WMM configuration per radio.

apWMMControlEntry entry .1.3.6.1.4.1.52.4.13.23.1.1

An Entry in the apWMMControlTable.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

apWMMState

This value indicates the WMM state.

Enumerationr/w

Enumerated Values:

0	disabled
1	required
2	supported

.1.3.6.1.4.1.52.4.13.23.1.1.1

apWMMBssParamTable

table

.1.3.6.1.4.1.52.4.13.23.2 · 1 row entry · 6 columns

Open in standard view

Conceptual table for EDCA default parameter values at a non-AP
QSTA. This table shall contain the four entries of the EDCA
parameters corresponding to four possible ACs (access category):
    1) AC_BE (best effort, ACI=0)
    2) AC_BK (background, ACI=1)
    3) AC_VI (video, ACI=2)
    4) AC_VO (voice, ACI=3)

apWMMBssParamEntry entry .1.3.6.1.4.1.52.4.13.23.2.1

An Entry (conceptual row) in the apWMMBssParamTable.
ifIndex - Each IEEE 802.11 interface is represented by an ifEntry.
Interface tables in this MIB module are indexed by ifIndex.

Indexes

RFC1213-MIBifIndex apWMMBssParamIndex

Column Syntax OID

apWMMBssParamIndex

The index used to identify instances of the columnar
objects in the apWMMBssParam Table. The value of this variable is
1) 1 AC_BE (best effort, ACI=0)
2) 2 AC_BK (background, ACI=1)
3) 3 AC_VI (video, ACI=2)…

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.52.4.13.23.2.1.1

apWMMBssParamCWmin

This attribute shall specify the value of the minimum size of the
window in the exponent form that shall be used by a QSTA for a particular AC for
generating a random number for the backoff.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.13.23.2.1.2

apWMMBssParamCWmax

This attribute shall specify the value of the maximum size of the
window in the exponent form that shall be used by a QSTA for a particular AC for
generating a random number for the backoff.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.13.23.2.1.3

apWMMBssParamAIFSN

This attribute shall specify the number of slots, after a SIFS
duration, that the QSTA, for a particular AC, shall sense the
medium idle either before transmitting or executing a backoff.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.13.23.2.1.4

apWMMBssParamTXOPLimit

This attribute shall specify the maximum time of
an TXOP in units of 32 microseconds for a given AC at a non-AP QSTA.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.13.23.2.1.5

apWMMBssParamAdmissionControl

This attribute, when TRUE, indicates that admission control is
mandatory for the given AC. When False, this attribute indicates
that the admission control is not mandatory for the given AC. The
default value for this pa…

TruthValuer/w

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.13.23.2.1.6

apWMMApParamTable

table

.1.3.6.1.4.1.52.4.13.23.3 · 1 row entry · 6 columns

Open in standard view

Conceptual table for EDCA default parameter values at the QAP.
This table shall contain the four entries of the EDCA
parameters corresponding to four possible ACs (access category):
    1) AC_BE (best effort, ACI=0)
    2) AC_BK (background, ACI=1)
    3) AC_VI (video, ACI=2)
    4) AC_VO (voice, ACI=3)

apWMMApParamEntry entry .1.3.6.1.4.1.52.4.13.23.3.1

An Entry (conceptual row) in the apWMMApParamTable.
ifIndex - Each IEEE 802.11 interface is represented by an ifEntry.
Interface tables in this MIB module are indexed by ifIndex.

Indexes

RFC1213-MIBifIndex apWMMApParamIndex

Column Syntax OID

apWMMApParamIndex

The index used to identify instances of the columnar
objects in the apWMMApParam Table. The value of this variable is
1) 1 AC_BE (best effort, ACI=0)
2) 2 AC_BK (background, ACI=1)
3) 3 AC_VI (video, ACI=2)
…

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.52.4.13.23.3.1.1

apWMMApParamCWmin

This attribute shall specify the value of the minimum size of the
window in the exponent form that shall be used by a QAP for a particular AC for
generating a random number for the backoff.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.13.23.3.1.2

apWMMApParamCWmax

This attribute shall specify the value of the maximum size of the
window in the exponent form that shall be used by a QAP for a particular AC for
generating a random number for the backoff.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.13.23.3.1.3

apWMMApParamAIFSN

This attribute shall specify the number of slots, after a SIFS
duration, that the QAP, for a particular AC, shall sense the
medium idle either before transmitting or executing a backoff.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.52.4.13.23.3.1.4

apWMMApParamTXOPLimit

This attribute shall specify the maximum time of
an TXOP in units of 32 microseconds for a given AC at a QAP.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.13.23.3.1.5

apWMMApParamAdmissionControl

TruthValuer/w

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.52.4.13.23.3.1.6