rogueApState
CTRON-AP3000-MIB ·
.1.3.6.1.4.1.52.4.13.8.2.1.8
Object
column
r/w
Enumeration
This value is used to enable/disable Rogue Ap Detection for this radio interface.
Context
- MIB
- CTRON-AP3000-MIB
- OID
.1.3.6.1.4.1.52.4.13.8.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- enterpriseApRadioEntry
- Table
- enterpriseApRadioTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| enterpriseApRadioIndex Radio Index for configuration. | column | Integer32 | .1.3.6.1.4.1.52.4.13.8.2.1.1 |
| rogueApDuration How long to scan each channel (in milliseconds). A longer duration will yield more
complete results. A shorter duration will allow clients a better chance
of remaining connected… | column | Integer32 | .1.3.6.1.4.1.52.4.13.8.2.1.10 |
| rogueApScanNow When writing the value to enable, the AP will trigger the Rouge AP scan function.
The value will always return disable(2). | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.11 |
| enterpriseApRadioAntennaModeControl This value indicates which antenna is in use for the radio Interface.
The values are interpreted as follows:
fixed(1) specify to use built-in antennas,
external(2) s… | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.12 |
| enterpriseApRadioFixedAntennaType This value indicates which antenna type is in use
as the fixed antenna is selected. | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.13 |
| enterpriseApRadioAntennaID This value indicates which antenna ID will be in use for the radio Interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.13.8.2.1.14 |
| enterpriseApRadioMulticastDataRate This value indicates the data rate for mc/bc packets from this
radio interface. sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18),
twentyFourMbps(24), thirtySixMbps(36), f… | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.15 |
| enterpriseApRadioAutoDataRate This value indicates whether automated data rate is enabled or not
for this radio interface | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.16 |
| enterpriseApRadioPreamble This value indicates the preamble length of 11g.
The values are interpreted as follows:
long(1) sets the preamble length to long.
short(2) sets the preamble length t… | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.17 |
| enterpriseApRadioSWRetryMode This value indicates whether SW retty mode is enabled or not
for this radio interface | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.18 |
| enterpriseApRadioAutoChannel This value indicates whether auto channel selection is enabled or not
for this radio interface | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.2 |
| enterpriseApRadioTransmitPower This value indicates the transmit power for this radio interface. | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.3 |
| enterpriseApRadioTurboMode This value indicates whether turbo mode is enabled for this radio interface. | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.4 |
| enterpriseApRadioDataRate This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The au… | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.5 |
| enterpriseApRadioGMode This value indicates the radio mode for the 802.11g radio.
This setting is only valid for the 802.11g interface. | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.6 |
| enterpriseApRadioAntennaMode This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
both(1) means use both built-in antennas,
left(2) means use left… | column | Enumeration | .1.3.6.1.4.1.52.4.13.8.2.1.7 |
| rogueApInterval How often to scan for Rogue Aps. The interval in minutes, with default
of 720(minutes). | column | Integer32 | .1.3.6.1.4.1.52.4.13.8.2.1.9 |