CPQNUNIF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
61

cpqnMibModuleTable

table mandatory
.1.3.6.1.4.1.232.121.1.1 · 1 row entry · 3 columns
Open in standard view 
This table contains a list of all the MIB modules actively supported
by a unit's agent.  This includes any standard RFC and Compaq
enterprise MIBs.
cpqnMibModuleEntry entry .1.3.6.1.4.1.232.121.1.1.1
There is one entry defined for each separate MIB module the agent
supports.
Indexes
cpqnMibModuleIndex
Column Syntax OID
cpqnMibModuleIndex mandatory
The index for this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.1.1.1.1
cpqnMibModuleDescr mandatory
This is a short textual description of the MIB module for this entry.
Examples could be RFC 1213 MIB-II or Compaq Unified MIB.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.232.121.1.1.1.2
cpqnMibModuleOid mandatory
This is the OID representing the base node of the MIB for this entry.
The base node of a MIB is defined here as the first MIB node that is
not defined in another MIB. For example, the base node OID for RMON
is MIB-II.R…
ObjectIdentifier .1.3.6.1.4.1.232.121.1.1.1.3

cpqnSerialPortTable

table mandatory
.1.3.6.1.4.1.232.121.2.3 · 1 row entry · 6 columns
Open in standard view 
There is one entry in this table for each serial port on the unit.
cpqnSerialPortEntry entry .1.3.6.1.4.1.232.121.2.3.1
This entry provides information and objects to control a serial port.
Indexes
cpqnSPortIndex
Column Syntax OID
cpqnSPortIndex mandatory
The index of this row.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.2.3.1.1
cpqnSPortIfIndex mandatory
This object indicates which entry in the MIB-II interface table
this serial port corresponds to. If this value is zero (0), then
this serial port DOES NOT have an associated MIB-II interface. This
object will only be …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.2.3.1.2
cpqnSPortModemInitStringEnable mandatory
DURABLE: If this object is enabled(1) then after a power up or reset
the unit will transmit the modem init string out the primary serial
port in order to initialize the modem. This will occur at the baud
rate value of…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.232.121.2.3.1.3
cpqnSPortModemInitString mandatory
DURABLE: This object contains a Modem Initialization String which is
used to configure a modem on this port to the desired mode. Refer to
the unit-specific documentation for information on the factory setting
for this…
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.232.121.2.3.1.4
cpqnSPortModemAutoNegotiateState mandatory
DURABLE: If enabled(1), the unit automatically detects the baud rate
of incoming calls and will adjust the baud rate on this port to match.
This is accomplished by watching for the connect indication strings
from a mod…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.232.121.2.3.1.5
cpqnSPortBaudRate mandatory
DURABLE: This is the current baud rate for the port. Its value must
match a cpqnBaudRate entry in cpqnSupportBaudRateTable. Note that
this value can automatically change if cpqnSPortModemAutoNegotiateState
is set to …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.2.3.1.6

cpqnSupportedBaudRateTable

table mandatory
.1.3.6.1.4.1.232.121.2.4 · 1 row entry · 3 columns
Open in standard view 
A table of supported baud rates for this unit.
cpqnSupportedBaudRateEntry entry .1.3.6.1.4.1.232.121.2.4.1
There is one entry defined for each supported baud rate for each
serial port.
Indexes
cpqnBaudRatePortIndex cpqnBaudRateIndex
Column Syntax OID
cpqnBaudRatePortIndex mandatory
The index into the cpqnSerialPortTable table identifying the port
this entry applies to.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.2.4.1.1
cpqnBaudRateIndex mandatory
The index of this row.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.2.4.1.2
cpqnBaudRate mandatory
The supported baud rate for the port indexed by cpqnBaudRatePortIndex.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.2.4.1.3

cpqnVersionTable

table mandatory
.1.3.6.1.4.1.232.121.3.1 · 1 row entry · 10 columns
Open in standard view 
This table contains a list of hardware and/or software components
resident in the unit.
cpqnVersionEntry entry .1.3.6.1.4.1.232.121.3.1.1
There is one entry defined for each hardware and/or software
component.
Indexes
cpqnVersionIndex
Column Syntax OID
cpqnVersionIndex mandatory
The index into the version table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.3.1.1.1
cpqnVersionType mandatory
The component's type.
CpqnVersionType
Textual Convention: CpqnVersionType Enumeration
Type Values:
1other
2hardware
3software
 .1.3.6.1.4.1.232.121.3.1.1.2
cpqnVersionDesc mandatory
A brief description of the component. This object may be empty.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.232.121.3.1.1.3
cpqnVersionMajor mandatory
The MAJOR version number of the component. This is always a value
between 0 and 255 and should be interpreted as a decimal number. An
example is version 2.14 where 2 is the major version number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.3.1.1.4
cpqnVersionMinor mandatory
The MINOR version number of the component. This is always a value
between 0 and 99 and should be interpreted as a two-digit decimal
number. An example is version 2.01 where 1 is the minor version
number. Another exam…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.3.1.1.5
cpqnVersionStep mandatory
The STEP identifier for the associated component. This value indicates
the level or class of the component, such as prototype, production,
or beta.
CpqnVersionStep
Textual Convention: CpqnVersionStep Enumeration
Type Values:
1other
2engineering
3alpha
4beta
5prototype
6pilot
7pre-production
8production
9post-production
10simple-revision
 .1.3.6.1.4.1.232.121.3.1.1.6
cpqnVersionRev mandatory
The REVISION of the step for the associated component. An example
is version 1.00B3 where 3 is the revision number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.3.1.1.7
cpqnVersionSerialNumber mandatory
The serial number of this component. The format of this
object is dependent on the unit type. Refer to the unit-specific
documentation for more information. This object is
empty for components which do not have a ser…
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.232.121.3.1.1.8
cpqnVersionUnitId mandatory
This is a number that uniquely identifies which unit in a collection of
one or more units that this entry applies to. For example, this unit
may be part of a stack, or a plug-in card in a chassis. For units
that are n…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.3.1.1.9
cpqnVersionParentIndex mandatory
A component represented by an entry in this table may be a
sub-component of another entity or unit. In this case, the value of
this object indicates this entry's parent entry in this table. For
example, a plug-in upli…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.3.1.1.10

cpqnCommunityAccessIPTable

table mandatory
.1.3.6.1.4.1.232.121.4.2 · 1 row entry · 6 columns
Open in standard view 
This table contains objects which control access to the agent over IP.
Access is restricted to only the hosts listed in this table.
          
If a station does not have read-write-allow-telnet(4) access to a unit,
then this table is not accessible, e.g. GET or SET messages accessing
this table from stations will have an authentication error returned.
GET NEXTs on this MIB from such stations will simply skip over this
table.
          
Care must be taken when modifying this table.  A network management
station can inadvertently modify this table so that it no longer
has read-write-allow-telnet(4) access.  If this occurs, then this table
can only be modified from another network management station with
write access, via telnet, or via a direct connection to the unit's
primary serial port.
          
Access to this unit via SNMP and Telnet can also be blocked if
all the entries in this table and the cpqnCommunityAccessIPXTable are
deleted.  In this case, this table can only be modified via a direct
connection via the primary serial port using the unit's user interface.
          
This table can be set to factory values using the user interface
accessed by Telnet or a direct connection to the unit's primary serial
port.  This table will also be set to factory values when cpqnUnitReset
is set to reset-to-factory-values(4).
cpqnCommAccessIPEntry entry .1.3.6.1.4.1.232.121.4.2.1
There is one entry defined for each host-community pair.
Indexes
cpqnAclIPIndex
Column Syntax OID
cpqnAclIPIndex mandatory
The index to this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.4.2.1.1
cpqnAclIPRowStatus mandatory
DURABLE: The status of this row entry. Rows are added to this
table using 'row sets'. When a row is added, this object must be set
to row-valid(1). To delete a row from this table, set this object for
the row to row…
CpqnRowStatusr/w
Textual Convention: CpqnRowStatus Enumeration
Type Values:
1row-valid
2row-invalid
 .1.3.6.1.4.1.232.121.4.2.1.2
cpqnAclIPAddrMask mandatory
DURABLE: This mask is applied to the source address of received
SNMP/IP messages. If the masked address matches cpqnAclIPAddrMatch
and the community in the SNMP packet matches the community name
in cpqnAclIPCommunity …
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.4.2.1.3
cpqnAclIPAddrMatch mandatory
DURABLE: The Masked address must match this value.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.4.2.1.4
cpqnAclIPCommunity mandatory
DURABLE: The community string that is required for any requests coming
from this host. The default value for this object is 'public'.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.232.121.4.2.1.5
cpqnAclIPRights mandatory
DURABLE: This object controls the access granted to SNMP requests
which match a mask/match and community name string. no-access(1)
means that that address/community name pair has neither SNMP/IP nor
Telnet access. re…
Enumerationr/w
Enumerated Values:
1no-access
2read-only-prevent-telnet
3read-only-allow-telnet
4read-write-allow-telnet
 .1.3.6.1.4.1.232.121.4.2.1.6

cpqnCommunityAccessIPXTable

table mandatory
.1.3.6.1.4.1.232.121.4.3 · 1 row entry · 6 columns
Open in standard view 
This table contains objects which control SNMP/IPX access to the agent.
Access is restricted to only the hosts listed in this table.
          
If a station does not have read-write(3) access to a unit,
then this table is not accessible,e.g. GET or SET messages accessing
this table from stations will have an authentication error returned.
GET NEXTs on this MIB from such stations will simply skip over this
table.
          
Care must be taken when modifying this table.  A network management
station can inadvertently modify this table so that it no longer
has read-write(3) access.  If this occurs, then this table
can only be modified from another network management station with
write access, via telnet, or via a direct connection to the unit's
primary serial port.
          
Access to this unit via SNMP and Telnet can also be blocked if
all the entries in this table and the cpqnCommunityAccessIPTable are
deleted.  In this case, this table can only be modified via a direct
connection via the primary serial port using the unit's user interface.
          
This table can be set to factory values using the user interface
accessed by Telnet or a direct connection to the unit's primary serial
port.  This table will also be set to factory values when cpqnUnitReset
is set to reset-to-factory-values(4).
cpqnCommAccessIPXEntry entry .1.3.6.1.4.1.232.121.4.3.1
There is one entry defined for each host-community pair.
Indexes
cpqnAclIPXIndex
Column Syntax OID
cpqnAclIPXIndex mandatory
The index to this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.4.3.1.1
cpqnAclIPXRowStatus mandatory
DURABLE: The status of this row entry. Rows are added to this
table using 'row sets'. When a row is added, this object must be set
to row-valid(1). To delete a row from this table, set this object for
the row to row…
CpqnRowStatusr/w
Textual Convention: CpqnRowStatus Enumeration
Type Values:
1row-valid
2row-invalid
 .1.3.6.1.4.1.232.121.4.3.1.2
cpqnAclIPXAddrMask mandatory
DURABLE: This mask is applied to the source address of received
SNMP messages. If the masked address matches cpqnAclIPXAddrMask
and the community in the SNMP packet matches the community name
in cpqnAclIPXCommunity fo…
IpxAddressr/w
Textual Convention: IpxAddress OctetString
Type Constraints:
range: 10
 .1.3.6.1.4.1.232.121.4.3.1.3
cpqnAclIPXAddrMatch mandatory
DURABLE: The Masked address must match this value.
IpxAddressr/w
Textual Convention: IpxAddress OctetString
Type Constraints:
range: 10
 .1.3.6.1.4.1.232.121.4.3.1.4
cpqnAclIPXCommunity mandatory
DURABLE: The community string that is required for any requests coming
from this host. The default value for this object is 'public'.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.232.121.4.3.1.5
cpqnAclIPXRights mandatory
DURABLE: This object controls the access granted to SNMP/IPX requests
which match a mask/match and community name string. no-access(1)
means that that address/community name pair has no SNMP/IPX access.
read-only(2) a…
Enumerationr/w
Enumerated Values:
1no-access
2read-only-access
3read-write-access
 .1.3.6.1.4.1.232.121.4.3.1.6

cpqnIPTrapDestTable

table mandatory
.1.3.6.1.4.1.232.121.5.1 · 1 row entry · 4 columns
Open in standard view 
A list of IP trap destination entries.
cpqnIPTrapDestEntry entry .1.3.6.1.4.1.232.121.5.1.1
A destination entry which defines the IP address to which traps are sent
for a community.
Indexes
cpqnIPTrapDestIndex
Column Syntax OID
cpqnIPTrapDestIndex mandatory
A value that uniquely identifies this IPTrapDestEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.5.1.1.1
cpqnIPTrapDestRowStatus mandatory
DURABLE: The status of this row entry. Rows are added to this
table using 'row sets'. When a row is added, this object must be set
to row-valid(1). To delete a row from this table, set this object for
the row to row…
CpqnRowStatusr/w
Textual Convention: CpqnRowStatus Enumeration
Type Values:
1row-valid
2row-invalid
 .1.3.6.1.4.1.232.121.5.1.1.2
cpqnIPTrapDestCommunity mandatory
DURABLE: A community name to which this destination IP address
belongs.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.232.121.5.1.1.3
cpqnIPTrapDestAddress mandatory
DURABLE: The IP address to send traps to on behalf of this entry.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.5.1.1.4

cpqnIPXTrapDestTable

table mandatory
.1.3.6.1.4.1.232.121.5.2 · 1 row entry · 4 columns
Open in standard view 
A list of IPX trap destination entries.
cpqnIPXTrapDestEntry entry .1.3.6.1.4.1.232.121.5.2.1
A destination entry which defines the IPX address to which traps are
sent for a community.
Indexes
cpqnIPXTrapDestIndex
Column Syntax OID
cpqnIPXTrapDestIndex mandatory
A value that uniquely identifies this IPXTrapDestEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.5.2.1.1
cpqnIPXTrapDestRowStatus mandatory
DURABLE: The status of this row entry. Rows are added to this
table using 'row sets'. When a row is added, this object must be set
to row-valid(1). To delete a row from this table, set this object for
the row to row…
CpqnRowStatusr/w
Textual Convention: CpqnRowStatus Enumeration
Type Values:
1row-valid
2row-invalid
 .1.3.6.1.4.1.232.121.5.2.1.2
cpqnIPXTrapDestCommunity mandatory
DURABLE: A community name to which this destination IPX address
belongs.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.232.121.5.2.1.3
cpqnIPXTrapDestAddress mandatory
DURABLE: The IPX address to send traps to on behalf of this entry.
IPX traps are sent to the standard IPX SNMP socket number.
IpxAddressr/w
Textual Convention: IpxAddress OctetString
Type Constraints:
range: 10
 .1.3.6.1.4.1.232.121.5.2.1.4

cpqnIpNetworkTable

table mandatory
.1.3.6.1.4.1.232.121.6.1 · 1 row entry · 9 columns
Open in standard view 
This table describes IP network information for each management agent
interface.  This could include all possible bridge groups and the SLIP
interface
cpqnIpNetworkEntry entry .1.3.6.1.4.1.232.121.6.1.1
There is one entry for each agent interface which describes
the IP protocol information on that interface.
Indexes
cpqnIpIfIndex
Column Syntax OID
cpqnIpIfIndex mandatory
This is the ifIndex value of an interface in the MIB-II interface table
for which this table entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.6.1.1.1
cpqnIpPhysAddr mandatory
The physical address of the management agent interface. This is
usually an interfaces IEEE MAC Address. For IEEE MAC address, the
value will be 6 bytes in network byte order. For interfaces which do
not have such phy…
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.232.121.6.1.1.2
cpqnIpAddr mandatory
DURABLE: The IP Address of this Agent interface.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.6.1.1.3
cpqnIpNetMask mandatory
DURABLE: The IP Subnet Mask of this Agent interface.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.6.1.1.4
cpqnIpRouter mandatory
DURABLE: The IP Address of the next hop Router (default Gateway)
used by this interface.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.6.1.1.5
cpqnIpFrameType mandatory
DURABLE: Except when booting up, an agent communicates over IP
using a single frame type defining the type of network that the IP
traffic is running on: Ethernet_II or IEEE 802.2_SNAP. When the agent
is performing BO…
Enumerationr/w
Enumerated Values:
1not-applicable
2ethernet-ii
3ieee-802-2-snap
 .1.3.6.1.4.1.232.121.6.1.1.6
cpqnIpAutoDiscoveryStatus mandatory
DURABLE: This object allows a user to enable the unit to send out
periodic ICMP Pings to ensure that the unit's IP Address is contained
in the ARP cache of its default gateway (cpqnIpRouter, if any!). If
the user sets…
Enumerationr/w
Enumerated Values:
1discover
2do-not-discover
 .1.3.6.1.4.1.232.121.6.1.1.7
cpqnIpPingPktRate mandatory
DURABLE: This object determines the rate (in seconds) at which ICMP
Pings are sent out by the unit to ensure that its IP Address remains
in the ARP cache of the unit's default gateway (cpqnIpRouter). This
object is us…
Integer32r/w
Constraints:
range: 55-65535
 .1.3.6.1.4.1.232.121.6.1.1.8
cpqnIpInfoSave mandatory
Setting this object allows the changes made to any of the settable
objects in this table to be written into non-volatile memory. The
changes will not take effect nor be written into non-volatile memory
until this objec…
Enumerationr/w
Enumerated Values:
1ignore-changes
2write-changes-to-nvram
3values-changed
4values-valid
 .1.3.6.1.4.1.232.121.6.1.1.9

cpqnIpxNetworkTable

table mandatory
.1.3.6.1.4.1.232.121.6.2 · 1 row entry · 5 columns
Open in standard view 
This table describes IPX network information for each agent
interface.
cpqnIpxNetworkEntry entry .1.3.6.1.4.1.232.121.6.2.1
There is one entry for each agent interface which describes
the IPX protocol information on that interface.
Indexes
cpqnIpxIfIndex
Column Syntax OID
cpqnIpxIfIndex mandatory
This is the ifIndex value of an interface in the MIB-II interface
table for which this table entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.6.2.1.1
cpqnIpxPhysAddr mandatory
The physical address of the management agent interface. This is
usually an interfaces IEEE MAC Address. For IEEE MAC address, the
value will be 6 bytes in network byte order. For interfaces which do
not have such phy…
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.232.121.6.2.1.2
cpqnIpxFrameType mandatory
DURABLE: The frame type with which IPX communication originating from
the unit will take place. The unit will respond to a packet using
the same frame type as was used in the request. This frame type comes
into effec…
Enumerationr/w
Enumerated Values:
1not-applicable
2ethernet-ii
3ethernet-802-3-raw
4ieee-802-2
5ieee-802-2-snap
 .1.3.6.1.4.1.232.121.6.2.1.3
cpqnIpxNetworkNumber mandatory
DURABLE: The IPX Network number for this interface. If this
object is 00000000, then the unit has not yet determined the
network number.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.232.121.6.2.1.4
cpqnIpxSAPBcastStatus mandatory
DURABLE: The unit may generate IPX SAP broadcasts. This allows
the unit to be auto-discovered. By setting this object to
do-ipx-SAPs(1), the unit will generate SAP broadcasts at a rate
of one every 60 seconds. By se…
Enumerationr/w
Enumerated Values:
1do-ipx-SAPs
2no-ipx-SAPs
 .1.3.6.1.4.1.232.121.6.2.1.5

cpqnBootpTable

table mandatory
.1.3.6.1.4.1.232.121.7.1 · 1 row entry · 5 columns
Open in standard view 
A table of BOOTP configuration information for each management agent
interface.  This table controls the BOOTP behavior of the basic
booting system.  Other software components installed in a unit
may also do BOOTP.  This table does not control those components.
cpqnBootpEntry entry .1.3.6.1.4.1.232.121.7.1.1
A list of BOOTP configuration information for each management agent
interface.
Indexes
cpqnBootpIfIndex
Column Syntax OID
cpqnBootpIfIndex mandatory
This is the ifIndex value of an interface in the MIB-II interface table
for which this table entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.121.7.1.1.1
cpqnBootpEnable mandatory
DURABLE: This object allows the user to enable/disable generation of
BOOTP requests on the interface specified by cpqnBootpIfIndex. BOOTP
requests can be generated over the SNAP frame type, Ethernet-II frame
type, or …
Enumerationr/w
Enumerated Values:
1disable-bootp
2enable-bootp-ethernet-ii
3enable-bootp-ieee-802-2-snap
4enable-bootp-both
 .1.3.6.1.4.1.232.121.7.1.1.2
cpqnBootpRetries mandatory
DURABLE: This determines the number of BOOTP requests that will be
transmitted from the interface indicated by cpqnBootpIfIndex.
This object is used in conjunction with the cpqnBootpRetryInterval
object. If both frame…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.232.121.7.1.1.3
cpqnBootpRetryInterval mandatory
DURABLE: This object allows the user to set the time period (in
seconds) between the transmission of BOOTP requests on the interface
specified by cpqnBootpIfIndex. This object is used in conjunction
with the cpqnBootp…
Integer32r/w
Constraints:
range: 5-255
 .1.3.6.1.4.1.232.121.7.1.1.4
cpqnBootpServerIpAddr mandatory
The IP address of the BOOTP Server that last responded on the interface
indicated by cpqnBootpIfIndex. If no BOOTP server has responded, then
this object will be '0.0.0.0'.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.232.121.7.1.1.5