CISCOSB-QOS-CLI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
44
Rows
44
Columns
276

rlQosOffsetTable

table deprecated
.1.3.6.1.4.1.9.6.1.101.88.4 · 1 row entry · 7 columns
Open in standard view 
This table specifies Offset Table information
rlQosOffsetEntry entry .1.3.6.1.4.1.9.6.1.101.88.4.1
Each entry in this table describes one classifier field.
The information includes: Offset Type the offset the mask and the
Pattern.
if the type is vlan then the value will be the vlan tag.
if the Type is in/out port it …
Indexes
No indexes recorded
Column Syntax OID
rlQosOffsetIndex deprecated
An arbitrary incremental Index
for the offset table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.4.1.1
rlQosOffsetType deprecated
Start of the offset.
ClassOffsetTyper/w
Textual Convention: ClassOffsetType Enumeration
Type Values:
1packetStart
2layer2-start
3mpls-start
4layer3-start
5layer4-start
6layer5-start
7vlan
8in-port
9out-port
10vpt
11ethertype
12inner-vlan
13layer3-ipv6-start
 .1.3.6.1.4.1.9.6.1.101.88.4.1.2
rlQosOffsetValue deprecated
The Offset value.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.4.1.3
rlQosOffsetMask deprecated
Define which bit to be extracted from the offset.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.4.1.4
rlQosOffsetPattern deprecated
The value to match too.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.4.1.5
rlQosOffsetTuplePointer deprecated
Pointer for the relevant Tuple.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.4.1.6
rlQosOffsetStatus deprecated
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.4.1.7

rlQosTupleTable

table
.1.3.6.1.4.1.9.6.1.101.88.5 · 1 row entry · 5 columns
Open in standard view 
This table specifies Tuple Table information
rlQosTupleEntry entry .1.3.6.1.4.1.9.6.1.101.88.5.1
Each entry in this table describes one Tuple.
The information includes: Tuple Type and the Tuples values.
The index is sequential integer represent by rlQosTupleIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosTupleIndex
An arbitrary incremental Index
for the offset table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.5.1.1
rlQosTupleType
Start of the offset.
ClassTupleTyper/w
Textual Convention: ClassTupleType Enumeration
Type Values:
1protocol
2ip-src
3ip-dest
4dscp
5ip-precedence
6udp-port-src
7udp-port-dest
8tcp-port-src
9tcp-port-dest
10mac-src
11mac-dest
12vlan
13in-port
14out-port
15general
16vpt
17ether-type
18tcp-flags
19icmp-type
20icmp-code
21igmp-type
22inner-vlan
23ipv6-src
24ipv6-dest
25udp-port-range-start-src
26udp-port-range-end-src
27udp-port-range-start-dest
28udp-port-range-end-dest
29tcp-port-range-start-src
30tcp-port-range-end-src
31tcp-port-range-start-dest
32tcp-port-range-end-dest
33ipv6-flow-label
 .1.3.6.1.4.1.9.6.1.101.88.5.1.2
rlQosTupleValue1
The Tuple no.1 value can be regular integer
values only.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.5.1.3
rlQosTupleValue2
The Tuple no.2 value can be IPv4/IPv6/MAC address
or protocol number with mask
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.5.1.4
rlQosTupleStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.5.1.5

rlQosAceTable

table
.1.3.6.1.4.1.9.6.1.101.88.6 · 1 row entry · 13 columns
Open in standard view 
This table specifies ACE table information
rlQosAceEntry entry .1.3.6.1.4.1.9.6.1.101.88.6.1
Each entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 8 tuples
pointers. The index is sequential integer represent by rlQosAceIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosAceIndex
An arbitrary incremental Index
for the ACE table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.1
rlQosAceAction
ACE Action to take.
AceActionTyper/w
Textual Convention: AceActionType Enumeration
Type Values:
1permit
2deny
3deny-DisablePort
4deny-LogInput
5permit-LogInput
 .1.3.6.1.4.1.9.6.1.101.88.6.1.2
rlQosAceType
ACE Type
AceObjectTyper/w
Textual Convention: AceObjectType Enumeration
Type Values:
1ip
2ip-TCP
3ip-UDP
4ip-Offset
5mac
6mac-Offset
7ip-ICMP
8ip-IGMP
9ipv6
10ipv6-TCP
11ipv6-UDP
12ipv6-Offset
13ipv6-ICMP
 .1.3.6.1.4.1.9.6.1.101.88.6.1.3
rlQosAceTuple1
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.4
rlQosAceTuple2
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.5
rlQosAceTuple3
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.6
rlQosAceTuple4
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.7
rlQosAceTuple5
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.8
rlQosAceTuple6
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.9
rlQosAceTuple7
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.10
rlQosAceTuple8
ACE Tuple 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.6.1.11
rlQosAceAccount
ACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.
BinaryStatusr/w
Textual Convention: BinaryStatus Enumeration
Type Values:
1disable
2enable
 .1.3.6.1.4.1.9.6.1.101.88.6.1.12
rlQosAceStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.6.1.13

rlQosAclTable

table
.1.3.6.1.4.1.9.6.1.101.88.7 · 1 row entry · 7 columns
Open in standard view 
This table specifies ACL table information
rlQosAclEntry entry .1.3.6.1.4.1.9.6.1.101.88.7.1
Each entry in this table describes one Classifier Element.
The information includes: Action and the row status. The ACE pointer
are in the ACL-ACE reference table.
The index is sequential integer represent by rlQosAceIn…
Indexes
No indexes recorded
Column Syntax OID
rlQosAclIndex
An arbitrary incremental Index
for the ACE table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.7.1.1
rlQosAclName
Name ACL.
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.7.1.2
rlQosAclType
ACL Type.
AclObjectTyper/w
Textual Convention: AclObjectType Enumeration
Type Values:
1mac
2ip
3ipv6
 .1.3.6.1.4.1.9.6.1.101.88.7.1.3
rlQosAclStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.7.1.4
rlQosAclNumOfAces
Holds number of aces in the acl.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.7.1.5
rlQosAclIsBoundToInterface
Indicates whether the ACL is bound to any interface or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.7.1.6
rlQosAclLastAceIndex
Holds the last ace index in the acl.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.7.1.7

rlQosAclAceRefTable

table
.1.3.6.1.4.1.9.6.1.101.88.8 · 1 row entry · 3 columns
Open in standard view 
This table specifies the ACE to ACL
relationship.
rlQosAclAceRefEntry entry .1.3.6.1.4.1.9.6.1.101.88.8.1
Each entry in this table describes the relationship
between ACE to ACL. Show which ACE include in one ACL.
The index is the ACE pointer represent
by rlQosAclAceRefAcePointer
Indexes
No indexes recorded
Column Syntax OID
rlQosAclAceRefAcePointer
The Index is the ACE pointer
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.8.1.1
rlQosAclAceRefAclPointer
ACL index Pointer
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.8.1.2
rlQosAclAceRefStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.8.1.3

rlQosClassMapTable

table
.1.3.6.1.4.1.9.6.1.101.88.9 · 1 row entry · 17 columns
Open in standard view 
This table specifies CCL table information
rlQosClassMapEntry entry .1.3.6.1.4.1.9.6.1.101.88.9.1
Each entry in this table describes one Class Map Element.
The information includes: Classes Name,Class Action,
Policer pointer, and 1 match statements.
The index is sequential integer represent by rlQosClassMapIndex
Indexes
rlQosFreeIndexesTableId
Column Syntax OID
rlQosClassMapIndex
Class Map Index
Integer32
Enumerated Values:
1tuple
2offset
3ace
4acl
5class
6policy
7policer
8shaper
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.1
rlQosClassMapName
Name of the Class Map.
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.9.1.2
rlQosClassMapType
Class map type
ClassMapTyper/w
Textual Convention: ClassMapType Enumeration
Type Values:
1matchAll
2matchAny
 .1.3.6.1.4.1.9.6.1.101.88.9.1.3
rlQosClassMapAction
Class Map Action.
ClassMapActionr/w
Textual Convention: ClassMapAction Enumeration
Type Values:
1none
2setIP-Precedence
3setDSCP
4setQueue
5setCos
6trust
 .1.3.6.1.4.1.9.6.1.101.88.9.1.4
rlQosClassMapMarkValue
Mark value when mark action has been chosen in
Class Map Action field.
Integer32r/w
Enumerated Values:
1acl
2class
3policy
4policer
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.5
rlQosClassMapPolicer
Policer pointer. 0-means no policer.
Integer32r/w
Constraints:
range: 0-32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.6
rlQosClassMapMatch1
Match ACL 1 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.7
rlQosClassMapMatch2
Match ACL 2 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.8
rlQosClassMapMarkVlan
If 'mark', than the classified
traffic will be remarked with new VLAN id.
If 'disabled' VLAN id is not changed.
If markNestedVlan, if the egress interface defined as
VLAN tagged member then a new VLAN tag is added to t…
MarkVlanActionr/w
Textual Convention: MarkVlanAction Enumeration
Type Values:
1noMark
2mark
3markNestedVlan
 .1.3.6.1.4.1.9.6.1.101.88.9.1.9
rlQosClassMapNewVlan
If rlQosClassMapMarkVlan is not 'noMark',
than the classified traffic will be
remarked with new VLAN id.
The value of this field sets new VLAN id.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.6.1.101.88.9.1.10
rlQosClassMapRedirectAction
Specifiy the redirection action.
RedirectActionr/w
Constraints:
range: 1-8
Textual Convention: RedirectAction Enumeration
Type Values:
1disabled
2trap
3redirectToInterface
4redirectToAllPorts
5mirror
6analyzerPort
7loopback
8redirectToPortGroup
9mirrorAndRedirectToInterface
10mirrorAndRedirectToInterfacesGroup
 .1.3.6.1.4.1.9.6.1.101.88.9.1.11
rlQosClassMapDestInterface
Relevant if rlQosClassMapRedirect is either
'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'.
Specified the output interface the packet is redireted to or
the port that gets copy of the packet in additi…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.12
rlQosClassMapStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.9.1.13
rlQosClassMapMatch3
Match ACL 3 pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.14
rlQosClassMapTrapId
If now zero, Indicates the trap type id the matched packets arrives with,
relevant when RedirectAction is trap or mirror.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.9.1.15
rlQosClassMapCounterEnable
Enable/disable counting per class map.
Counts packets matche the class map rules.
SNMPv2-TCTruthValuer/w
Constraints:
range: 1-1
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.9.1.16
rlQosClassMapTunnelIdx
If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx
is added to the packet
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.88.9.1.17

rlQosPolicerTable

table
.1.3.6.1.4.1.9.6.1.101.88.10 · 1 row entry · 11 columns
Open in standard view 
This table specifies All the Policers in the system Information
rlQosPolicerEntry entry .1.3.6.1.4.1.9.6.1.101.88.10.1
Each entry in this table describes one policer.
The information includes: Policer name, Policer type, Committed Rate,
Committed Burst, Out-of-Profile Action.
The index is sequential integer represent by rlQosPolicerIndex
Indexes
rlQosAceTidxAclIndex rlQosAceTidxIndex
Column Syntax OID
rlQosPolicerIndex
Policer Index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.10.1.1
rlQosPolicerName
Name of the Policer.
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.10.1.2
rlQosPolicerType
Policer type
PolicerTyper/w
Textual Convention: PolicerType Enumeration
Type Values:
1single
2aggregate
3cascade
 .1.3.6.1.4.1.9.6.1.101.88.10.1.3
rlQosPolicerCir
Committed rate value.
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.88.10.1.4
rlQosPolicerCbs
Committed burst Value.
bytesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.88.10.1.5
rlQosPolicerAction
Out of profile Action.
PolicerActionr/w
Textual Convention: PolicerAction Enumeration
Type Values:
1none
2drop
3remark
4explicit-remark
5cascadePointer
 .1.3.6.1.4.1.9.6.1.101.88.10.1.6
rlQosPolicerCasPointerRemVal
Remark value in case of explicit remark.
The functionality as cascade pointer is obsolete.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.10.1.7
rlQosPolicerStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.10.1.8
rlQosPolicerPir
Peak rate value.
When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate
and when they are both non 0 this means the mode is Two Rate.
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.88.10.1.9
rlQosPolicerPbs
Peak burst Value.
When both this and rlQosPolicerPir are 0 this means the mode is Single Rate
and when they are both non 0 this means the mode is Two Rate.
bytesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.88.10.1.10
rlQosPolicerPeakAction
Out of profile peak action.
PolicerActionr/w
Textual Convention: PolicerAction Enumeration
Type Values:
1none
2drop
3remark
4explicit-remark
5cascadePointer
 .1.3.6.1.4.1.9.6.1.101.88.10.1.11

rlQosPolicyMapTable

table
.1.3.6.1.4.1.9.6.1.101.88.11 · 1 row entry · 4 columns
Open in standard view 
This table specifies Policy Map Table Information
rlQosPolicyMapEntry entry .1.3.6.1.4.1.9.6.1.101.88.11.1
Each entry in this table describes one policy map.
The information includes: Index, Policy Map name,
Up to 6 class map names.
The index is sequential integer represent by rlQosPolicerIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosPolicyMapIndex
Policy map Index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.11.1.1
rlQosPolicyMapName
Policy map Name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.6.1.101.88.11.1.2
rlQosPolicyMapStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.11.1.3
rlQosPolicyMapIsBoundToInterface
Indicates whether the policy map is bound to any interface or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.11.1.4

rlQosPolicyClassRefTable

table
.1.3.6.1.4.1.9.6.1.101.88.12 · 1 row entry · 3 columns
Open in standard view 
This table specifies The relationship
between policy map to class map
rlQosPolicyClassRefEntry entry .1.3.6.1.4.1.9.6.1.101.88.12.1
Each entry in this table describes the connection
between class-map entry to policy map by using pointers.
The index is Class map pointer
represent by rlQosPolicyClassRefClassPointer
Indexes
No indexes recorded
Column Syntax OID
rlQosPolicyClassRefClassPointer
The Index is the Class-map pointer
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.12.1.1
rlQosPolicyClassRefPolicyPointer
Policy map index Pointer
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.12.1.2
rlQosPolicyClassRefStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.12.1.3

rlQosIfPolicyTable

table
.1.3.6.1.4.1.9.6.1.101.88.13 · 1 row entry · 22 columns
Open in standard view 
This table specifies for each interface
the Policy Map attach to it
rlQosIfPolicyEntry entry .1.3.6.1.4.1.9.6.1.101.88.13.1
Each entry in this table describes what policy
Map attached to specific Interface.
The index is Interface Index represent by rlIfIndex and
the interface type represent by rlIfType
Indexes
No indexes recorded
Column Syntax OID
rlIfIndex
Interface Index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.1
rlIfType
Interface Type(vlan/port).
InterfaceType
Textual Convention: InterfaceType Enumeration
Type Values:
1vlan
2port
 .1.3.6.1.4.1.9.6.1.101.88.13.1.2
rlQosIfPolicyMapPointerIn
Policy map pointer Input.
Integer32r/w
Constraints:
range: 0-63
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.3
rlQosIfPolicyMapPointerOut
Policy map pointer Output.
Integer32r/w
Constraints:
range: 0-2
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.4
rlQosIfTrustActive
Interface Basic Mode Trust is active or not .
BinaryStatusr/w
Textual Convention: BinaryStatus Enumeration
Type Values:
1disable
2enable
 .1.3.6.1.4.1.9.6.1.101.88.13.1.5
rlQosPortShaperStatus
If there is shaper on the port
BinaryStatusr/w
Textual Convention: BinaryStatus Enumeration
Type Values:
1disable
2enable
 .1.3.6.1.4.1.9.6.1.101.88.13.1.6
rlQosCirPortShaper
The CIR for the port shaper.
N/A when the shper is disabled
bpsInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.7
rlQosCbsPortShaper
The CBS for the port shaper.
N/A when the shper is disabled
bytesInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.8
rlQosIfProfilePointer
Interface Profile name pointer.
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.13.1.9
rlQosQueueProfilePointer
Queue Profile name pointer.
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.13.1.10
rlQosQueueShapeProfilePointer
Queue shape Profile pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.11
rlQosAclDefaultAction
When one ACL is enterd then what to do for the last rull.
AclDefaultActionr/w
Textual Convention: AclDefaultAction Enumeration
Type Values:
1deny-all
2forward-all
3application-specific
 .1.3.6.1.4.1.9.6.1.101.88.13.1.12
rlQosIfPolicyMapStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.13.1.13
rlQosIfAclIn
Index of an ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.14
rlQosIfAclOut
Index of an ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.15
rlQosIfPolicerIn
Index of an Policer in the rlQosPolicerTable, which is applied
to the ingress of an interface.
0 - means no Policer applied.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.16
rlQosPortRateLimitStatus
If there is Rate limit on the port
BinaryStatusr/w
Textual Convention: BinaryStatus Enumeration
Type Values:
1disable
2enable
 .1.3.6.1.4.1.9.6.1.101.88.13.1.17
rlQosCirPortRateLimit
The CIR for the port rate limit.
N/A when the Rate limit is disabled
bpsInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.18
rlQosCbsPortRateLimit
The CBS for the port Rate limit.
N/A when the Rate limit is disabled
bytesInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.19
rlQosIfIpv6AclIn
Index of an IPv6 ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.20
rlQosIfIpv6AclOut
Index of an IPv6 ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.13.1.21
rlQosAclDefaultActionOut
When one egress ACL is enterd then what to do for the last rull.
AclDefaultActionr/w
Textual Convention: AclDefaultAction Enumeration
Type Values:
1deny-all
2forward-all
3application-specific
 .1.3.6.1.4.1.9.6.1.101.88.13.1.22

rlQosIfProfileCfgTable

table
.1.3.6.1.4.1.9.6.1.101.88.14 · 1 row entry · 16 columns
Open in standard view 
This table specifies for each Queue the Tail
Drop or WRED parameters and the EF of WRR
parameters.
rlQosIfProfileCfgEntry entry .1.3.6.1.4.1.9.6.1.101.88.14.1
Each entry in this table describes one queue
parameters: Tail-drop threshold for drop precedence
0,1,3 and the WRED min-max threshold and the probability
factor for Drop precedence 0,1,2 and the WRED Q factor
and the EF…
Indexes
No indexes recorded
Column Syntax OID
rlIfProfileName
Interface Index.
OctetString .1.3.6.1.4.1.9.6.1.101.88.14.1.1
rlQosQueueId
Queue id Index.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.14.1.2
rlQosTdThersholdDp0
Tail Drop Threshold for Drop Precedence 0.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.3
rlQosTdThersholdDp1
Tail Drop Threshold for Drop Precedence 1.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.4
rlQosTdThersholdDp2
Tail Drop Threshold for Drop Precedence 2.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.5
rlQosRedMinDp0
WRED Min Threshold for Drop Precedence 2.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.6
rlQosRedMaxDp0
WRED Max Threshold for Drop Precedence 0.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.7
rlQosRedProbDp0
WRED probability for Drop Precedence 0.
Integer32r/w
Constraints:
range: 1-8
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.14.1.8
rlQosRedMinDp1
WRED Min Threshold for Drop Precedence 2.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.9
rlQosRedMaxDp1
WRED Max Threshold for Drop Precedence 1.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.10
rlQosRedProbDp1
WRED probability for Drop Precedence 1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.14.1.11
rlQosRedMinDp2
WRED Min Threshold for Drop Precedence 2.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.12
rlQosRedMaxDp2
WRED Max Threshold for Drop Precedence 2.
percentInteger32r/w .1.3.6.1.4.1.9.6.1.101.88.14.1.13
rlQosRedProbDp2
WRED probability for Drop Precedence 2.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.14.1.14
rlQosRedQweight
Q factor for WRED.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.14.1.15
rlQosIfprofileStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.14.1.16

rlQosDscpMutationTable

table
.1.3.6.1.4.1.9.6.1.101.88.15 · 1 row entry · 2 columns
Open in standard view 
This table specifies The DSCP
Mutation table
rlQosDscpMutationEntry entry .1.3.6.1.4.1.9.6.1.101.88.15.1
Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp
Indexes
No indexes recorded
Column Syntax OID
rlQosOldDscp
Old DSCP.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.15.1.1
rlQosNewDscp
New DSCP.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.15.1.2

rlQosDscpRemarkTable

table
.1.3.6.1.4.1.9.6.1.101.88.16 · 1 row entry · 3 columns
Open in standard view 
This table specifies The DSCP
Remark table
rlQosDscpRemarkEntry entry .1.3.6.1.4.1.9.6.1.101.88.16.1
Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp
Indexes
No indexes recorded
Column Syntax OID
rlQosRmOldDscp
Old DSCP.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.16.1.1
rlQosRmNewDscp
Specifies new DSCP in the violation action.
Integer32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.6.1.101.88.16.1.2
rlQosRmNewExceedDscp
Specifies new DSCP in the exceed action.
Integer32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.6.1.101.88.16.1.3

rlQosCosQueueTable

table
.1.3.6.1.4.1.9.6.1.101.88.17 · 1 row entry · 2 columns
Open in standard view 
This table specifies The Cos
to queue map table
rlQosCosQueueEntry entry .1.3.6.1.4.1.9.6.1.101.88.17.1
Each entry in this table describes queue ID.
The index is CoS represent by rlQosCosIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosCosIndex
CoS value (0-7).
Integer32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.6.1.101.88.17.1.1
rlQosCosQueueId
Queue ID.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.17.1.2

rlQosDscpQueueTable

table
.1.3.6.1.4.1.9.6.1.101.88.18 · 1 row entry · 2 columns
Open in standard view 
This table specifies The DSCP
to Queue map table
rlQosDscpQueueEntry entry .1.3.6.1.4.1.9.6.1.101.88.18.1
Each entry in this table describes The
Queue Number.
The index is DSCP represent by rlQosDscpIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosDscpIndex
DSCP value.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.18.1.1
rlQosQueueNum
Queue Number.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.18.1.2

rlQosTcpPortQueueTable

table
.1.3.6.1.4.1.9.6.1.101.88.19 · 1 row entry · 3 columns
Open in standard view 
This table specifies TCP
Port to Queue map table
rlQosTcpPortQueueEntry entry .1.3.6.1.4.1.9.6.1.101.88.19.1
Each entry in this table describes The
Queue Number.
The index is TCP/UDP port represent by rlQosTcpUdpPort
Indexes
No indexes recorded
Column Syntax OID
rlQosTcpPort
TCP port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.19.1.1
rlQosTcpQueueValue
Queue Number.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.19.1.2
rlQosTcpPortQueueStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.19.1.3

rlQosUdpPortQueueTable

table
.1.3.6.1.4.1.9.6.1.101.88.20 · 1 row entry · 3 columns
Open in standard view 
This table specifies UDP
Port to Queue map table
rlQosUdpPortQueueEntry entry .1.3.6.1.4.1.9.6.1.101.88.20.1
Each entry in this table describes The
Queue Number.
The index is UDP port represent by rlQosTcpUdpPort
Indexes
rlQosDenyAceStatisticsIfIndex
Column Syntax OID
rlQosUdpPort
UDP port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.20.1.1
rlQosUdpQueueValue
Queue value.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.20.1.2
rlQosUdpPortQueueStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.20.1.3

rlQosEfManageTable

table
.1.3.6.1.4.1.9.6.1.101.88.21 · 1 row entry · 3 columns
Open in standard view 
This table specifies UDP
Port to DSCP map table
rlQosEfManageEntry entry .1.3.6.1.4.1.9.6.1.101.88.21.1
This Table describes The
EF management for the system.
The index is UDP port represent by rlQosEfQueueId
Indexes
No indexes recorded
Column Syntax OID
rlQosEfQueueId
Queue-ID.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.21.1.1
rlQosEfState
Enable/disable
BinaryStatusr/w
Textual Convention: BinaryStatus Enumeration
Type Values:
1disable
2enable
 .1.3.6.1.4.1.9.6.1.101.88.21.1.2
rlQosEfPriority
The priority of the queue
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.21.1.3

rlQosQueueProfileTable

table
.1.3.6.1.4.1.9.6.1.101.88.22 · 1 row entry · 19 columns
Open in standard view 
This table describes the queue managment profiles
rlQosQueueProfileEntry entry .1.3.6.1.4.1.9.6.1.101.88.22.1
Each entry in this table describes The
queue managment profile Value.
The index is profile name represent by rlQueueProfileName
Indexes
No indexes recorded
Column Syntax OID
rlQueueProfileName
Profile name for the Queue profile.
OctetString .1.3.6.1.4.1.9.6.1.101.88.22.1.1
rlQosTypeQueue1
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.2
rlQosValueQueue1
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.3
rlQosTypeQueue2
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.4
rlQosValueQueue2
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.5
rlQosTypeQueue3
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.6
rlQosValueQueue3
for EF read-only for wrr the weight
Integer32r/w
Constraints:
range: 1-32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.7
rlQosTypeQueue4
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.8
rlQosValueQueue4
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.9
rlQosTypeQueue5
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.10
rlQosValueQueue5
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.11
rlQosTypeQueue6
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.12
rlQosValueQueue6
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.13
rlQosTypeQueue7
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.14
rlQosValueQueue7
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.15
rlQosTypeQueue8
EF or WRR
QueueTyper/w
Textual Convention: QueueType Enumeration
Type Values:
1ef
2wrr
 .1.3.6.1.4.1.9.6.1.101.88.22.1.16
rlQosValueQueue8
for EF read-only for wrr the weight
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.17
rlQosQueueProfileStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.22.1.18
rlQosNumOfIfConnections
how many time this entry connected to the if policy table
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.22.1.19

rlQosQueueShapeProfileTable

table
.1.3.6.1.4.1.9.6.1.101.88.23 · 1 row entry · 18 columns
Open in standard view 
This table specifies the queue shaper profile
rlQosQueueShapeProfileEntry entry .1.3.6.1.4.1.9.6.1.101.88.23.1
Each entry in this table describes The
shaper profile for all queues.
The index sequencial index represent by rlQosQueueShapeIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosQueueShapeIndex
Profile Index.
Integer32
Constraints:
range: 0-7
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.1
rlQosCirQueue1
CIR for Queue1 0 for not active
Integer32r/w
Constraints:
range: 1-8
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.2
rlQosCbsQueue1
CBS for Queue1 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.3
rlQosCirQueue2
CIR for Queue2 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.4
rlQosCbsQueue2
CBS for Queue2 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.5
rlQosCirQueue3
CIR for Queue3 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.6
rlQosCbsQueue3
CBS for Queue3 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.7
rlQosCirQueue4
CIR for Queue4 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.8
rlQosCbsQueue4
CBS for Queue4 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.9
rlQosCirQueue5
CIR for Queue5 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.10
rlQosCbsQueue5
CBS for Queue5 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.11
rlQosCirQueue6
CIR for Queue6 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.12
rlQosCbsQueue6
CBS for Queue6 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.13
rlQosCirQueue7
CIR for Queue7 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.14
rlQosCbsQueue7
CBS for Queue7 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.15
rlQosCirQueue8
CIR for Queue8 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.16
rlQosCbsQueue8
CBS for Queue8 0 for not active
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.23.1.17
rlQosQueueShapeProfileStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.23.1.18

rlQosAclCounterTable

table
.1.3.6.1.4.1.9.6.1.101.88.24 · 1 row entry · 4 columns
Open in standard view 
The  table is used to show statistics for
ACL applied on an interface.
rlQosAclCounterEntry entry .1.3.6.1.4.1.9.6.1.101.88.24.1
This entry shows value of conter for a
particular ACE of an ACL.
Indexes
No indexes recorded
Column Syntax OID
rlQosAclCounterInterface
Interface Index on which ACL is applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.24.1.1
rlQosAclCounterAclIndex
Index of ACL, which was applied on the IfIndex.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.24.1.2
rlQosAclCounterAceIndex
Index of ACE, which is belong to an ACL.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.24.1.3
rlQosAclCounterValue
The value of the ACE counter.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.88.24.1.4

rlQosFreeIndexesTable

table
.1.3.6.1.4.1.9.6.1.101.88.25 · 1 row entry · 2 columns
Open in standard view 
The  table is used to get free indexes of tables to create
new entries. The algorithm for free indexes depends on
table's type:
Tuple table      - first free index.
Offset table     - first free index.
ACE table        - last used index + ACE indexes delta.
ACL table        - first free index.
Class Map table  - last used index + Class Map indexes delta.
Policy Map table - first free index.
Policer Table    - first free index.
The ACE indexes delta and Class Map indexes delta are used
to supply QoS MIB user easy insert entry capabilities.
Values of these deltas depend on the MIB implementation.
The 'Get and increment' approach is used in all cases.
rlQosFreeIndexesEntry entry .1.3.6.1.4.1.9.6.1.101.88.25.1
The entry is used to get free index for particular table.
Indexes
No indexes recorded
Column Syntax OID
rlQosFreeIndexesTableId
Identification of the table, for which free index
is retrieved.
Enumeration .1.3.6.1.4.1.9.6.1.101.88.25.1.1
rlQosFreeIndexesValue
Free index for table. 0 means no free entries.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.25.1.2

rlQosNamesToIndexesTable

table
.1.3.6.1.4.1.9.6.1.101.88.26 · 1 row entry · 3 columns
Open in standard view 
The table is used to get the ACL,Class-Map and Policy-Map
indexes from the name.
rlQosNamesToIndexesEntry entry .1.3.6.1.4.1.9.6.1.101.88.26.1
The entry is used to get index form particular name and table type.
Indexes
No indexes recorded
Column Syntax OID
rlQosNamesToIndexesTableId
Identification of the table, for which the index
is retrieved.
Enumeration .1.3.6.1.4.1.9.6.1.101.88.26.1.1
rlQosNamesToIndexesName
The name of the entry
OctetString .1.3.6.1.4.1.9.6.1.101.88.26.1.2
rlQosNamesToIndexesValue
the index for table
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.26.1.3

rlQosCosQueueDefaultMapTable

table
.1.3.6.1.4.1.9.6.1.101.88.29 · 1 row entry · 2 columns
Open in standard view 
The table is used to set default 802.1p map (vpt to queue)
rlQosCosQueueDefaultMapEntry entry .1.3.6.1.4.1.9.6.1.101.88.29.1
The entry is used to get index form particular name and table type.
Indexes
No indexes recorded
Column Syntax OID
rlQosCosQueueDefaultMapVpt
vlan priority tag , 3 bits of priority which determine
the service class.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.29.1.1
rlQosCosQueueDefaultMapQueueId
the queue id vary from the first queue id to Max Number of queues supported
Integer32 .1.3.6.1.4.1.9.6.1.101.88.29.1.2

rlQosPredefBlockAclTable

table
.1.3.6.1.4.1.9.6.1.101.88.30 · 1 row entry · 4 columns
Open in standard view 
The table is used apply predefined ACLs to interfaces.
Predefined ACLs is ACL to filter particular protocol or
protocol's family. These ACL may operate simultaneously
with IP and MAC ACLs.
rlQosPredefBlockAclEntry entry .1.3.6.1.4.1.9.6.1.101.88.30.1
The entry is used to apply predefined ACLs to the interface.
Indexes
No indexes recorded
Column Syntax OID
rlQosPredefBlockAclIfIndex
IfIndex of port/trunk or VLAN tag of VLAN
on which predefined ACLa will be configured.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.30.1.1
rlQosPredefBlockAclIfType
Interface Type(vlan/port).
InterfaceType
Textual Convention: InterfaceType Enumeration
Type Values:
1vlan
2port
 .1.3.6.1.4.1.9.6.1.101.88.30.1.2
rlQosPredefBlockAclMask
This bitmap defines predefined ACL which are applied
on an interface. The table below defines bitmasks for
supported predefined ACL.
Protocol/Family bitmask Description
==============================================…
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.30.1.3
rlQosPredefBlockAclStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.30.1.4

rlQosAceTidxTable

table
.1.3.6.1.4.1.9.6.1.101.88.31 · 1 row entry · 20 columns
Open in standard view 
This table specifies ACE table with two index information
rlQosAceTidxEntry entry .1.3.6.1.4.1.9.6.1.101.88.31.1
Each entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 11 tuples
pointers. The index is sequential integer represent by
rlQosAceTidxAclIndex ACL index and rl…
Indexes
No indexes recorded
Column Syntax OID
rlQosAceTidxAclIndex
An arbitrary incremental Index
for the ACL ACE connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.1
rlQosAceTidxIndex
An arbitrary incremental Index
for the ACE table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.2
rlQosAceTidxAction
ACE Action to take.
AceActionTyper/w
Textual Convention: AceActionType Enumeration
Type Values:
1permit
2deny
3deny-DisablePort
4deny-LogInput
5permit-LogInput
 .1.3.6.1.4.1.9.6.1.101.88.31.1.3
rlQosAceTidxType
ACE Type
AceObjectTyper/w
Textual Convention: AceObjectType Enumeration
Type Values:
1ip
2ip-TCP
3ip-UDP
4ip-Offset
5mac
6mac-Offset
7ip-ICMP
8ip-IGMP
9ipv6
10ipv6-TCP
11ipv6-UDP
12ipv6-Offset
13ipv6-ICMP
 .1.3.6.1.4.1.9.6.1.101.88.31.1.4
rlQosAceTidxTuple1
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.5
rlQosAceTidxTuple2
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.6
rlQosAceTidxTuple3
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.7
rlQosAceTidxTuple4
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.8
rlQosAceTidxTuple5
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.9
rlQosAceTidxTuple6
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.10
rlQosAceTidxTuple7
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.11
rlQosAceTidxTuple8
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.12
rlQosAceTidxAccount
ACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.
BinaryStatusr/w
Textual Convention: BinaryStatus Enumeration
Type Values:
1disable
2enable
 .1.3.6.1.4.1.9.6.1.101.88.31.1.13
rlQosAceTidxStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.31.1.14
rlQosAceTidxTimeRange
ACE time range name.
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.88.31.1.15
rlQosAceTidxTimeRangeIsActive
ACE time range is rule active state shows is ACE currently active or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.31.1.16
rlQosAceTidxTuple9
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.17
rlQosAceTidxTuple10
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.18
rlQosAceTidxTuple11
ACE Tuple pointer.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.31.1.19
rlQosAceTidxActionDropType
This field is valid only if AceActionType is
deny or deny-DisablePort.
RlQosAceTidxActionDropTyper/w
Textual Convention: RlQosAceTidxActionDropType Enumeration
Type Values:
1hardDrop
2softDrop
 .1.3.6.1.4.1.9.6.1.101.88.31.1.20

rlQosDscpQueueDefaultMapTable

table
.1.3.6.1.4.1.9.6.1.101.88.33 · 1 row entry · 2 columns
Open in standard view 
The table is used to set default dscp to queue map
rlQosDscpQueueDefaultMapEntry entry .1.3.6.1.4.1.9.6.1.101.88.33.1
The entry is used to get index form particular name and table type.
Indexes
No indexes recorded
Column Syntax OID
rlQosDscpQueueDefaultMapDscp
dscp , 6 bits of priority which determine
the service class.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.33.1.1
rlQosDscpQueueDefaultMapQueueId
the queue id vary from the first queue id to Max Number of queues supported
Integer32 .1.3.6.1.4.1.9.6.1.101.88.33.1.2

rlQosDscpToDpTable

table
.1.3.6.1.4.1.9.6.1.101.88.34 · 1 row entry · 2 columns
Open in standard view 
This table specifies The DSCP
To Dp table
rlQosDscpToDpEntry entry .1.3.6.1.4.1.9.6.1.101.88.34.1
Each entry in this table describes the new
DP for the packet.
The index is DSCP represent by rlQosDscp
Indexes
No indexes recorded
Column Syntax OID
rlQosDscp
Packet DSCP.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.34.1.1
rlQosDp
New DP.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.34.1.2

rlQosPortPolicyStatisticsTable

table
.1.3.6.1.4.1.9.6.1.101.88.35.1 · 1 row entry · 4 columns
Open in standard view 
This table specifies statistics counter for policies with specific actions
rlQosPortPolicyStatisticsEntry entry .1.3.6.1.4.1.9.6.1.101.88.35.1.1
Each entry in this table describes counter per port.
The index is port represent by rlIfIndex.
In each entry represents counter, it's type , it's size and whether it's enabled.
Indexes
No indexes recorded
Column Syntax OID
rlQosPortPolicyStatisticsCntrType
Counter type.
StatisticsCntrTyper/w
Textual Convention: StatisticsCntrType Enumeration
Type Values:
1statisticsCntrTypeSetDSCP
2statisticsCntrTypeDeny
 .1.3.6.1.4.1.9.6.1.101.88.35.1.1.1
rlQosPortPolicyStatisticsCntrNumOfBits
Counter size in bits.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.1.1.2
rlQosPortPolicyStatisticsEnableCounting
Indication whether the counter is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.35.1.1.3
rlQosPortPolicyStatisticsCounterValue
Counter value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.1.1.4

rlQosSinglePolicerStatisticsTable

table
.1.3.6.1.4.1.9.6.1.101.88.35.2 · 1 row entry · 5 columns
Open in standard view 
This table specifies statistics counters per QoS meter
rlQosSinglePolicerStatisticsEntry entry .1.3.6.1.4.1.9.6.1.101.88.35.2.1
Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether t…
Indexes
No indexes recorded
Column Syntax OID
rlQosSinglePolicerStatisticsInProfileCounterValue
Counter value of in profile traffic.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.2.1.1
rlQosSinglePolicerStatisticsInProfileCntrNumOfBits
Counter size in bits for in profile counter.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.2.1.2
rlQosSinglePolicerStatisticsOutProfileCounterValue
Counter value of Out Profile traffic.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.2.1.3
rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits
Counter size in bits for out profile counter.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.2.1.4
rlQosSinglePolicerStatisticsStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.35.2.1.5

rlQosAggregatePolicerStatisticsTable

table
.1.3.6.1.4.1.9.6.1.101.88.35.3 · 1 row entry · 5 columns
Open in standard view 
This table specifies statistics counters per QoS aggregate meter
rlQosAggregatePolicerStatisticsEntry entry .1.3.6.1.4.1.9.6.1.101.88.35.3.1
Each entry in this table describes counter per aggregate meter.
The index is rlQosPolicerIndex.
In each entry there are fields representing whether the counter for the
meter is enabled and three counters values - for gr…
Indexes
No indexes recorded
Column Syntax OID
rlQosAggregatePolicerStatisticsInProfileCounterValue
Counter value of In Profile amount of bytes.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.3.1.1
rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits
Counter size in bits for In Profile .
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.3.1.2
rlQosAggregatePolicerStatisticsOutProfileCounterValue
Counter value of Out Profile amount of bytes.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.3.1.3
rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits
Counter size in bits for Out Profile.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.3.1.4
rlQosAggregatePolicerStatisticsStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.35.3.1.5

rlQosOutQueueStatisticsTable

table
.1.3.6.1.4.1.9.6.1.101.88.35.4 · 1 row entry · 13 columns
Open in standard view 
This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence
rlQosOutQueueStatisticsEntry entry .1.3.6.1.4.1.9.6.1.101.88.35.4.1
Each entry in this table describes counter per any permutation of
Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'.
The index is port represent by rlQosOutQueueStatisticsCountrID.
In each entry t…
Indexes
No indexes recorded
Column Syntax OID
rlQosOutQueueStatisticsCountrID
Counter id, the key of the table.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.1
rlQosOutQueueStatisticsIfIndexList
Port for which the flow is counted.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.2
rlQosOutQueueStatisticsPortAll
Indication for whether the port is configured as range of all the ports
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.3
rlQosOutQueueStatisticsVlan
VLAN for which the flow is counted.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.4
rlQosOutQueueStatisticsVlanAll
Indication for whether the VLAN is configured as range of all the VLANS
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.5
rlQosOutQueueStatisticsQueue
Queue for which the flow is counted.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.35.4.1.6
rlQosOutQueueStatisticsQueueAll
Indication for whether the queue is configured as range of all the Queues
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.7
rlQosOutQueueStatisticsDP
Drop Precedence for which the flow is counted.
CISCOSB-POLICY-MIBStatisticsDPTyper/w
Textual Convention: CISCOSB-POLICY-MIBStatisticsDPType Enumeration
Type Values:
1green
2yellow
3red
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.8
rlQosOutQueueStatisticsDPAll
Indication for whether the DP is configured as range of all the DPs
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.9
rlQosOutQueueStatisticsCounterTailDropValue
The counter for tail dropped value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.10
rlQosOutQueueStatisticsCounterAllValue
The counter for all traffic value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.11
rlQosOutQueueStatisticsCntrNumOfBits
Counter size in bits for the counter.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.12
rlQosOutQueueStatisticsStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.35.4.1.13

rlQosGlobalStatisticsCntrsTable

table
.1.3.6.1.4.1.9.6.1.101.88.35.5 · 1 row entry · 4 columns
Open in standard view 
This table specifies statistics global counters  for specific rules for all ports
that they are connected to
rlQosGlobalStatisticsCntrsEntry entry .1.3.6.1.4.1.9.6.1.101.88.35.5.1
Each entry represents global counter.
Indexes
No indexes recorded
Column Syntax OID
rlQosGlobalStatisticsCntrsType
Counter type.
StatisticsCntrType
Textual Convention: StatisticsCntrType Enumeration
Type Values:
1statisticsCntrTypeSetDSCP
2statisticsCntrTypeDeny
 .1.3.6.1.4.1.9.6.1.101.88.35.5.1.1
rlQosGlobalStatisticsCntrsNumOfBits
Counter size in bits.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.9.6.1.101.88.35.5.1.2
rlQosGlobalStatisticsCntrsCounterValue
Counter value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.35.5.1.3
rlQosGlobalStatisticsStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.35.5.1.4

rlQosClassifierUtilizationTable

table
.1.3.6.1.4.1.9.6.1.101.88.36.1 · 1 row entry · 5 columns
Open in standard view 
A table containing Classifier utilization information.
Each row represents objects for a particular Unit
present in this system.
rlQosClassifierUtilizationEntry entry .1.3.6.1.4.1.9.6.1.101.88.36.1.1
A Single entry containing Classifier utilization information.
Indexes
No indexes recorded
Column Syntax OID
rlQosClassifierUtilizationUnitId
The Unit ID of this Classifier. must be unique per entry.
This is an index into the table. Main Pool ID is 1.
Unsigned32 .1.3.6.1.4.1.9.6.1.101.88.36.1.1.1
rlQosClassifierUtilizationPoolId
The Pool ID of this Classifier.
This is an index into the table.
Unsigned32 .1.3.6.1.4.1.9.6.1.101.88.36.1.1.2
rlQosClassifierUtilizationPercent
The classifier utilization percentage. 255(0xFF) represents NA
Unsigned32 .1.3.6.1.4.1.9.6.1.101.88.36.1.1.3
rlQosClassifierUtilizationRulesNumber
The classifier utilization number of used rules, in short rules resolution.
Unsigned32 .1.3.6.1.4.1.9.6.1.101.88.36.1.1.4
rlQosClassifierUtilizationFreeRulesNumber
The classifier utilization number of not used yet rules on the unit, in short rules resolution.
Unsigned32 .1.3.6.1.4.1.9.6.1.101.88.36.1.1.5

rlQosPortToProfileMappingTable

table
.1.3.6.1.4.1.9.6.1.101.88.37 · 1 row entry · 2 columns
Open in standard view 
This table maps between port and profile
rlQosPortToProfileMappingEntry entry .1.3.6.1.4.1.9.6.1.101.88.37.1
Each entry in this table describes
mapping between port and profile
Indexes
No indexes recorded
Column Syntax OID
rlQosPort
Port number
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.37.1.1
rlQosProfileName
profile
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.6.1.101.88.37.1.2

rlQosPolicyClassPriorityRefTable

table
.1.3.6.1.4.1.9.6.1.101.88.39 · 1 row entry · 4 columns
Open in standard view 
This table specifies The relationship
between policy map to class map
rlQosPolicyClassPriorityRefEntry entry .1.3.6.1.4.1.9.6.1.101.88.39.1
Each entry in this table describes the connection
between class-map entry to policy map by using pointers.
The index is Class map pointer
represent by rlQosPolicyClassRefClassPointer.
It is also specifies the class-map …
Indexes
No indexes recorded
Column Syntax OID
rlQosPolicyClassPriorityRefPriority
The class-map priority within the policy-map
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.39.1.1
rlQosPolicyClassPriorityRefClassPointer
Class-map index Pointer
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.39.1.2
rlQosPolicyClassPriorityRefPolicyPointer
Policy map index Pointer
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.39.1.3
rlQosPolicyClassPriorityRefStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.39.1.4

rlQosDenyAceStatisticsTable

table
.1.3.6.1.4.1.9.6.1.101.88.42 · 1 row entry · 2 columns
Open in standard view 
This table holds statistics for deny ACEs.
rlQosDenyAceStatisticsEntry entry .1.3.6.1.4.1.9.6.1.101.88.42.1
Each entry in this table holds number of hits for deny ACEs
attached to specific Interface.
Indexes
No indexes recorded
Column Syntax OID
rlQosDenyAceStatisticsIfIndex
Interface Index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.42.1.1
rlQosDenyAceStatisticsIfCounter
Number of hits on deny ACEs for this interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.42.1.2

rlQosModeGlobalCfgTable

table
.1.3.6.1.4.1.9.6.1.101.88.46 · 1 row entry · 7 columns
Open in standard view 
This table responsible to set the global qos mode configuration:
qos mode, qos trust mode, and if port are trusted by default in qos advanced
mode.
rlQosModeGlobalCfgEntry entry .1.3.6.1.4.1.9.6.1.101.88.46.1
This table responsible to set the global qos mode configuration:
qos mode, qos trust mode, and if port are trusted by default in qos advanced
mode.
Current implemnetaion assumes only one entry exist.
Indexes
No indexes recorded
Column Syntax OID
rlQosGlobalIndex
Entry index - currenly only one entry can exist, indexes hard coded with value '1'.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.46.1.1
rlQosGlobalQoSMode
This field replaces deprecated scalar rlQosCliQosMode.
Defines the global qos operation mode: disable, basic or advnaced.
QosGlobalModer/w
Textual Convention: QosGlobalMode Enumeration
Type Values:
1disable
2basic
3advance
 .1.3.6.1.4.1.9.6.1.101.88.46.1.2
rlQosBasicGlobalTrustMode
This field replaces deprecated scalar rlQosCliBasicModeCfg.
Defines the global qos trust operation mode relevant for qos basic mode.
QosTrustModer/w
Textual Convention: QosTrustMode Enumeration
Type Values:
1cos
2dscp
3cos-dscp
 .1.3.6.1.4.1.9.6.1.101.88.46.1.3
rlQosAdvcGlobalTrustMode
This field replaces deprecated scalar rlQosCliBasicModeCfg.
Defines the global qos trust operation mode relevant for qos advanced mode.
QosTrustModer/w
Textual Convention: QosTrustMode Enumeration
Type Values:
1cos
2dscp
3cos-dscp
 .1.3.6.1.4.1.9.6.1.101.88.46.1.4
rlQoSPortTrustAdvancedMode
This field specified whether ports are set to trused or not-trusted by
default when switching to qos advanced mode.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.46.1.5
rlQosDscpMutationEnable
This field indicates if dscp to dscp mutation mode is enable.
It can be set to true in the following terms:
1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced)
2.if rlQosGlobalQ…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.88.46.1.6
rlQosModeGlobalCfgStatus
This status of entry action.
In current implementation only one entry exist, therefor only status = active is
acceptable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.6.1.101.88.46.1.7

rlQosClassMapCounterTable

table
.1.3.6.1.4.1.9.6.1.101.88.47 · 1 row entry · 1 columns
Open in standard view 
The  table is used to show statistics for
ACL applied on an interface.
rlQosClassMapCounterEntry entry .1.3.6.1.4.1.9.6.1.101.88.47.1
This entry returns the value of the class map counter.
Entry is added/deleted to this MIB when counting is enabled/disabled
on the class map.
The counter is set to zero upon reading its value.
Indexes
No indexes recorded
Column Syntax OID
rlQosClassMapCounterValue
This field returns the current value of the class map counter.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.6.1.101.88.47.1.2

rlQosApplicationTrapIdTable

table
.1.3.6.1.4.1.9.6.1.101.88.48 · 1 row entry · 2 columns
Open in standard view 
The  read only table is used to get the trapId
assisated to application wants to use the trap action in
the class map table
rlQosApplicationTrapIdEntry entry .1.3.6.1.4.1.9.6.1.101.88.48.1
This entry holds the trapId for application using the trap
action in the class map table.
Indexes
No indexes recorded
Column Syntax OID
rlQosApplicationName
This field represents the application name and traffic type.
OctetString .1.3.6.1.4.1.9.6.1.101.88.48.1.1
rlQosApplicationTrapId
This field defines the trap id to be use in the class map entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.48.1.2

rlQosLogInputInterfacesAceMatchedTable

table
.1.3.6.1.4.1.9.6.1.101.88.50 · 1 row entry · 6 columns
Open in standard view 
This table holds a list and  of ACE matched log-input option interfaces.
rlQosLogInputInterfacesAceMatchedEntry entry .1.3.6.1.4.1.9.6.1.101.88.50.1
This table holds only one entry of port list and vlan list.
Indexes
No indexes recorded
Column Syntax OID
rlQosLogInputInterfacesAceMatchedIndex
An index is entrie's sequence.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.50.1.1
rlQosLogInputInterfacesAceMatchedPorts
the matched log-input ACEs port list
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.88.50.1.2
rlQosLogInputInterfacesAceMatchedVlanList1to1024
the matched log-input ACEs vlan list from 1 to 1024.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.50.1.3
rlQosLogInputInterfacesAceMatchedVlanList1025to2048
the matched log-input ACEs vlan list from 1025 to 2048.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.50.1.4
rlQosLogInputInterfacesAceMatchedVlanList2049to3072
the matched log-input ACEs vlan list from 2049 to 3072.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.50.1.5
rlQosLogInputInterfacesAceMatchedVlanList3073to4094
the matched log-input ACEs vlan list from 3073 to 4094.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.50.1.6

rlQosCosProfileTable

table
.1.3.6.1.4.1.9.6.1.101.88.51 · 1 row entry · 5 columns
Open in standard view 
This table specifies the Cos to queue map per-profile table
rlQosCosProfileEntry entry .1.3.6.1.4.1.9.6.1.101.88.51.1
Each entry in this table describes a QoS profile. The indices are
Application index, represented by rlQosCosProfileAppIndex
Profile index, represent by rlQosCosProfileIndex
and CoS represent by rlQosCosProfileCosIndex
Indexes
No indexes recorded
Column Syntax OID
rlQosCosProfileAppIndex
Application index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.51.1.1
rlQosCosProfileIndex
Profile index per-application.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.51.1.2
rlQosCosProfileCosIndex
CoS value of an incoming packet.
Integer32 .1.3.6.1.4.1.9.6.1.101.88.51.1.3
rlQosCosProfileEgressCos
CoS value to (optionally) set in 802.1p User Priority field of matching packets.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.51.1.4
rlQosCosProfileEgressQueue
Traffic class queue assigned to matching packets.
Integer32r/w .1.3.6.1.4.1.9.6.1.101.88.51.1.5

rlQosCosProfileInterfaceTable

table
.1.3.6.1.4.1.9.6.1.101.88.52 · 1 row entry · 3 columns
Open in standard view 
This table specifies the Cos profile per-interface
rlQosCosProfileInterfaceEntry entry .1.3.6.1.4.1.9.6.1.101.88.52.1
Each entry in this table describes a CoS profile for an interface
Indexes
No indexes recorded
Column Syntax OID
rlQosCosProfileInterfaceIfIndex
Interface index.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.52.1.1
rlQosCosProfileInterfaceAppIndex
Application index.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.52.1.2
rlQosCosProfileInterfaceCosProfileIndex
CoS-Profile index per-application.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.52.1.3

rlQosAclBoundIfTable

table
.1.3.6.1.4.1.9.6.1.101.88.53 · 1 row entry · 6 columns
Open in standard view 
This table specifies per ACL its bound interfaces
rlQosAclBoundIfEntry entry .1.3.6.1.4.1.9.6.1.101.88.53.1
Each entry in this table describes the interfaces bound to ACL,
Ports and Vlans.
The index is represented by rlQosAclBoundIfAclId
Indexes
No indexes recorded
Column Syntax OID
rlQosAclBoundIfAclId
Acl index
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.88.53.1.1
rlQosAclBoundedIfPortsList
Ports list bounded to Acl
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.9.6.1.101.88.53.1.2
rlQosAclBoundedIfVlansList1to1024
Vlan list bounded to Acl from 1 to 1024.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList1 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.53.1.3
rlQosAclBoundedIfVlansList1025to2048
Vlan list bounded to Acl from 1025 to 2048.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList2 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.53.1.4
rlQosAclBoundedIfVlansList2049to3072
Vlan list bounded to Acl from 2048 to 3072.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList3 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.53.1.5
rlQosAclBoundedIfVlansList3073to4094
Vlan list bounded to Acl from 3073 to 4094.
CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4
Textual Convention: CISCOSB-BRIDGEMIBOBJECTS-MIBVlanList4 OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.9.6.1.101.88.53.1.6