rlQosAclDefaultActionOut
CISCOSB-QOS-CLI-MIB ·
.1.3.6.1.4.1.9.6.1.101.88.13.1.22
Object
column
r/w
AclDefaultAction
When one egress ACL is enterd then what to do for the last rull.
Context
- MIB
- CISCOSB-QOS-CLI-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.88.13.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rlQosIfPolicyEntry
- Table
- rlQosIfPolicyTable
- Siblings
- 21
Syntax
AclDefaultAction
- Source
- AclDefaultAction
- Base type
Enumeration
Values & Constraints
Type Values
1 | deny-all |
2 | forward-all |
3 | application-specific |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlIfIndex Interface Index. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.1 |
| rlQosQueueProfilePointer Queue Profile name pointer. | column | OctetString | .1.3.6.1.4.1.9.6.1.101.88.13.1.10 |
| rlQosQueueShapeProfilePointer Queue shape Profile pointer. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.11 |
| rlQosAclDefaultAction When one ACL is enterd then what to do for the last rull. | column | AclDefaultAction | .1.3.6.1.4.1.9.6.1.101.88.13.1.12 |
| rlQosIfPolicyMapStatus The status of a table entry.
It is used to delete/Add an entry from this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.6.1.101.88.13.1.13 |
| rlQosIfAclIn Index of an ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.14 |
| rlQosIfAclOut Index of an ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.15 |
| rlQosIfPolicerIn Index of an Policer in the rlQosPolicerTable, which is applied
to the ingress of an interface.
0 - means no Policer applied. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.16 |
| rlQosPortRateLimitStatus If there is Rate limit on the port | column | BinaryStatus | .1.3.6.1.4.1.9.6.1.101.88.13.1.17 |
| rlQosCirPortRateLimit The CIR for the port rate limit.
N/A when the Rate limit is disabled | column | bps Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.18 |
| rlQosCbsPortRateLimit The CBS for the port Rate limit.
N/A when the Rate limit is disabled | column | bytes Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.19 |
| rlIfType Interface Type(vlan/port). | column | InterfaceType | .1.3.6.1.4.1.9.6.1.101.88.13.1.2 |
| rlQosIfIpv6AclIn Index of an IPv6 ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.20 |
| rlQosIfIpv6AclOut Index of an IPv6 ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.21 |
| rlQosIfPolicyMapPointerIn Policy map pointer Input. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.3 |
| rlQosIfPolicyMapPointerOut Policy map pointer Output. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.4 |
| rlQosIfTrustActive Interface Basic Mode Trust is active or not . | column | BinaryStatus | .1.3.6.1.4.1.9.6.1.101.88.13.1.5 |
| rlQosPortShaperStatus If there is shaper on the port | column | BinaryStatus | .1.3.6.1.4.1.9.6.1.101.88.13.1.6 |
| rlQosCirPortShaper The CIR for the port shaper.
N/A when the shper is disabled | column | bps Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.7 |
| rlQosCbsPortShaper The CBS for the port shaper.
N/A when the shper is disabled | column | bytes Integer32 | .1.3.6.1.4.1.9.6.1.101.88.13.1.8 |
| rlQosIfProfilePointer Interface Profile name pointer. | column | OctetString | .1.3.6.1.4.1.9.6.1.101.88.13.1.9 |