CISCO-XDSL-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
15

cXdslLineTable

table
.1.3.6.1.4.1.9.9.204.1.1 · 1 row entry · 2 columns
Open in standard view 
This table contains enterprise-specific line parameters
for XTU-C class xDSL devices supported by the system.
cXdslLineEntry entry .1.3.6.1.4.1.9.9.204.1.1.1
A set of enterprise-specific xDSL line parameters for an
XTU-C class device.
There exists an entry for each ifEntry with an ifType of
xDSL such as adsl, sdsl, idsl, etc. that are supported by
the system.
Indexes
IF-MIBifIndex
Column Syntax OID
cXdslLineTimeSinceLastChange
Represents the time elapsed since the status of this
interface was last changed.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.204.1.1.1.1
cXdslLineNoOfChanges
Represents the number of changes of the interface status
since last reset of the agent or since a XTU-C modem was
installed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.204.1.1.1.2

cXdslTestTable

table
.1.3.6.1.4.1.9.9.204.1.2 · 1 row entry · 8 columns
Open in standard view 
This table contains enterprise-specific test
parameters initiated by the XTU-C class devices
supported by the system.
cXdslTestEntry entry .1.3.6.1.4.1.9.9.204.1.2.1
A set of enterprise-specific test parameters for an
XTU-C class xDSL device.
There exists an entry for each ifEntry with an ifType of
xDSL such as adsl, sdsl, idsl, etc. that are supported by
the system.
Indexes
IF-MIBifIndex
Column Syntax OID
cXdslTestStatus
Represents status of the test per port. Once a test is
completed or aborted, the status remains at passed, failed,
or aborted until user clears it by setting cXdslTestTrigger
to clear or starts a new test.
This object …
Enumeration
Enumerated Values:
1inactive
2active
3passed
4failed
5aborted
 .1.3.6.1.4.1.9.9.204.1.2.1.1
cXdslTestType
The type of test to be performed. The test duration is
determined by cXdslTestTime.
All the test types inhibit the service on that line.
The agent will only change cXdslTestType, if no test is
active on the targeted por…
Enumerationr/w
Enumerated Values:
1none
2bertDigitalLocal
3bertAnalogLocal
4bertDigitalRemote
5bertAnalogRemote
6other
 .1.3.6.1.4.1.9.9.204.1.2.1.2
cXdslTestTrigger
Starts, stops (aborts) a test in progress or clears the
test results. The agent will only start a new test, if no
test is active on the targeted port. The value of this
object returns 'ready' when read, the value canno…
Enumerationr/w
Enumerated Values:
1stop
2start
3clear
4ready
 .1.3.6.1.4.1.9.9.204.1.2.1.3
cXdslTestTime
Test duration. Time interval between 1 - 30 minutes.
minutesInteger32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.9.9.204.1.2.1.4
cXdslTestBertErrors
Errors during BERT test.
The test will abort if any BERT errors occur.

Note: that even if there are no BERT errors the test can
still fail due to BertBitErrors.

Bit Description
--- -…
Bits
Enumerated Values:
0noError
1cpeBertAborted
2lostCpeSync
3noCpeSync
4noCpeResults
5coBertAborted
6lostCoSync
7noCoSync
 .1.3.6.1.4.1.9.9.204.1.2.1.5
cXdslTestBertBitErrors
This value represents the number of BERT bit errors accumulated
during the test duration, the value may not be available
until completion of the test. The test will fail if this value
is greater than 0.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.204.1.2.1.6
cXdslTestBertRunTime
This value represents the BERT run time in seconds, the
value may not be available until completion of the test.
secondsInteger32
Constraints:
range: 0-1800
 .1.3.6.1.4.1.9.9.204.1.2.1.7
cXdslTestBertBitRate
This value represents the BERT bitrate in bps that was
detected during the BERT test, the value may not be
available until completion of the test.
bpsInteger32
Constraints:
range: 0-20000000
 .1.3.6.1.4.1.9.9.204.1.2.1.8

cXdslModeTable

table
.1.3.6.1.4.1.9.9.204.1.3 · 1 row entry · 2 columns
Open in standard view 
This table contains enterprise-specific mode 
parameters initiated by the XTU-C class devices
supported by the system.
cXdslModeEntry entry .1.3.6.1.4.1.9.9.204.1.3.1
A set of enterprise-specific mode parameters for an
XTU-C class xDSL device.
There exists an entry for each ifEntry with an ifType of
xDSL such as adsl, sdsl, idsl, etc. that are supported by
the system.
Indexes
IF-MIBifIndex
Column Syntax OID
cXdslModeLoopback
The value of this object specifies the loopback mode of
this interface. The interface will stay in loopback mode
until this object is set to disabled.
The XTU-C may support other mode types that are not defined
in this …
Enumerationr/w
Enumerated Values:
1disabled
2loopbackAnalogLocal
3loopbackDigitalLocal
4loopbackAnalogRemote
5loopbackDigitalRemote
6other
 .1.3.6.1.4.1.9.9.204.1.3.1.1
cXdslModeSpectrum
The value of this object specifies the spectrum mode of
this interface. The interface will stay in spectrum mode
until this object is set to disabled.
The modes will inhibit the service on that line.
Not all spectrum mo…
Enumerationr/w
Enumerated Values:
1disabled
2spectrum1
3spectrum2
4spectrum3
5spectrum4
6spectrum5
7spectrum6
 .1.3.6.1.4.1.9.9.204.1.3.1.2

cXdslLineConfProfileTable

table
.1.3.6.1.4.1.9.9.204.1.4 · 1 row entry · 3 columns
Open in standard view 
This table extends the adslLineConfProfileTable and contains
enterprise-specific xDSL configuration information. Entries in
this table apply to more than one type of DSL modems
cXdslLineConfProfileEntry entry .1.3.6.1.4.1.9.9.204.1.4.1
A configuration profile containing enterprise-specific xDSL
line configuration information.
An entry exist in this table for every profile created by
adslLineConfProfileRowStatus which will also modify or
delete an …
Indexes
No indexes recorded
Column Syntax OID
cXdslLineConfPayloadScrambled
This object specifies whether ATM Payload Scrambling
is enabled for this profile.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.204.1.4.1.1
cXdslLineConfAlarmsEnabled
This object specifies whether Alarms are enabled for
this profile.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.204.1.4.1.2
cXdslLineConfLinkUpDownTrap
This object specifies whether Link Up/Down traps
are enabled for this profile.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.204.1.4.1.3