cXdslTestStatus – CISCO-XDSL-LINE-MIB

Object

column Enumeration

Represents status of the test per port. Once a test is
completed or aborted, the status remains at passed, failed, 
or aborted until user clears it by setting cXdslTestTrigger
to clear or starts a new test.
This object will return 'passed' if there are no
cXdslTestBertErrors and no cXdslTestBertBitErrors

Context

MIB: CISCO-XDSL-LINE-MIB
OID: .1.3.6.1.4.1.9.9.204.1.2.1.1
Type: column
Access: readonly
Status: current
Parent: cXdslTestEntry
Table: cXdslTestTable
Siblings: 7

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	inactive
`2`	active
`3`	passed
`4`	failed
`5`	aborted

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cXdslTestType The type of test to be performed. The test duration is determined by cXdslTestTime. All the test types inhibit the service on that line. The agent will only change cXdslTestType, …	column	Enumeration	`.1.3.6.1.4.1.9.9.204.1.2.1.2`
cXdslTestTrigger Starts, stops (aborts) a test in progress or clears the test results. The agent will only start a new test, if no test is active on the targeted port. The value of this object re…	column	Enumeration	`.1.3.6.1.4.1.9.9.204.1.2.1.3`
cXdslTestTime Test duration. Time interval between 1 - 30 minutes.	column	minutes Integer32	`.1.3.6.1.4.1.9.9.204.1.2.1.4`
cXdslTestBertErrors Errors during BERT test. The test will abort if any BERT errors occur. Note: that even if there are no BERT errors the test can still fail due to BertBitErrors. …	column	Bits	`.1.3.6.1.4.1.9.9.204.1.2.1.5`
cXdslTestBertBitErrors This value represents the number of BERT bit errors accumulated during the test duration, the value may not be available until completion of the test. The test will fail if this v…	column	Unsigned32	`.1.3.6.1.4.1.9.9.204.1.2.1.6`
cXdslTestBertRunTime This value represents the BERT run time in seconds, the value may not be available until completion of the test.	column	seconds Integer32	`.1.3.6.1.4.1.9.9.204.1.2.1.7`
cXdslTestBertBitRate This value represents the BERT bitrate in bps that was detected during the BERT test, the value may not be available until completion of the test.	column	bps Integer32	`.1.3.6.1.4.1.9.9.204.1.2.1.8`