CISCO-WPAN-MIB
This MIB module defines management objects for
configuration and monitoring of Wireless Personal
Area Network (WPAN).
Personal Area Network (PAN) is a network for interconnecting
devices centered on an individual person's workspace.
A Wireless Personal Area Network (WPAN) is a PAN in which the
connections are wireless.
WPAN is based on the standard IEEE 802.15.4.
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
PAN - Personal Area Network
RPL - IPv6 Routing Protocol for Low power
and Lossy networks
WPAN - Wireless Personal Area Network
ciscoWpanMIB
1.3.6.1.4.1.9.9.819
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex ifName |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
Objects (20)
|
|
.1.3.6.1.4.1.9.9.819 |
|
|
|
.1.3.6.1.4.1.9.9.819.0 |
|
|
|
.1.3.6.1.4.1.9.9.819.1 |
|
|
|
.1.3.6.1.4.1.9.9.819.1.1 |
|
|
|
.1.3.6.1.4.1.9.9.819.1.1.1 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.9.9.819.1.1.1.1 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.1 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.10 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.3 |
|
|
Unsigned32 | .1.3.6.1.4.1.9.9.819.1.1.1.1.4 |
|
|
Unsigned32 | .1.3.6.1.4.1.9.9.819.1.1.1.1.5 |
|
|
Unsigned32 | .1.3.6.1.4.1.9.9.819.1.1.1.1.6 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.7 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.8 |
|
|
Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.9 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.819.1.1.2 |
|
|
.1.3.6.1.4.1.9.9.819.2 |
|
|
|
.1.3.6.1.4.1.9.9.819.2.1 |
|
|
|
.1.3.6.1.4.1.9.9.819.2.2 |
Notifications / Traps (8)
| Name | OID | Description |
|---|---|---|
|
|
.1.3.6.1.4.1.9.9.819.0.1 |
This notification is generated if the WPAN service status has been changed. |
|
|
.1.3.6.1.4.1.9.9.819.0.2 |
This notification is generated if a WPAN RPL table has been reset. |
|
|
.1.3.6.1.4.1.9.9.819.0.3 |
This notification is generated if the number of nodes in the RPL table is greater than the threshold in cwpanIfRplTableMinorThreshNodes. |
|
|
.1.3.6.1.4.1.9.9.819.0.4 |
This notification is generated if the number of nodes in a RPL table become less than or equal to the cwpanIfRplTableMinorThreshNodes value after a cwpanRisingIfRplTblMinorThreshNodesNotif notification is generated. |
|
|
.1.3.6.1.4.1.9.9.819.0.5 |
This notification is generated if the number of nodes in a RPL table is greater than the value of cwpanIfRplTableMajorThreshNodes. |
|
|
.1.3.6.1.4.1.9.9.819.0.6 |
This notification is generated when the number of nodes in a RPL table become less than cwpanIfRplTableMajorThreshNodes value after a cwpanRisingIfRplTblMajorThreshNodesNotif notification is generated. |
|
|
.1.3.6.1.4.1.9.9.819.0.7 |
This notification is generated when WPAN HA state change. |
|
IF-MIBifName cwpanIfHAFailureCode
|
.1.3.6.1.4.1.9.9.819.0.8 |
This notification is generated when there is a failure in WPAN HA module. |