cwpanIfServiceStatusReason
CISCO-WPAN-MIB ·
.1.3.6.1.4.1.9.9.819.1.1.1.1.2
Object
column
Enumeration
This object indicates the reason of the last state
change of the WPAN service associated with this given
interface.
unknown (1) - unknown
powerDown (2) - power down WPAN module
powerUp (3) - power up WPAN module
moduleRemove (4) - module removed
moduleReload (5) - power cycle WPAN module
driverStop (6) - driver stop
driverStart (7) - driver start
firmwareUpgrade (8) - firmware upgrade
firmwareReset (9) - firmware reset
watchDog (10) - watchdog triggered
Context
- MIB
- CISCO-WPAN-MIB
- OID
.1.3.6.1.4.1.9.9.819.1.1.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cwpanInterfaceEntry
- Table
- cwpanInterfaceTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | powerDown |
3 | powerUp |
4 | moduleRemove |
5 | moduleReload |
6 | driverStop |
7 | driverStart |
8 | firmwareUpgrade |
9 | firmwareReset |
10 | watchDog |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwpanIfServiceStatus This object indicates the status of WPAN service associated
with this given interface.
start (1) - WPAN service start
stop (2) - WPAN service stop | column | Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.1 |
| cwpanIfHAStandbyReady This object indicates the standby is ready.
1 - true
2 - false | column | Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.10 |
| cwpanIfRplTableResetReason This object indicates the last reset reason of the WPAN
RPL table associated with this given interface.
unknown (1) - unknown
manuallyClear (2) - RPL tabl… | column | Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.3 |
| cwpanIfRplTableNodes This object indicates the total number of entries in
the WPAN RPL table for this given interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.819.1.1.1.1.4 |
| cwpanIfRplTableMajorThreshNodes This object specifies the major node threshold
for the WPAN RPL table.
When the value of the corresponding instance of
cwpanIfRplTableNodes is greater than this val… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.819.1.1.1.1.5 |
| cwpanIfRplTableMinorThreshNodes This object specifies the threshold for the RPL
table nodes.
When the value of the corresponding instance of
cwpanIfRplTableNodes is greater than this threshold,
a … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.819.1.1.1.1.6 |
| cwpanIfHAState This object indicates the WPAN HA state associated with this
given interface.
1 - disabled
2 - active
3 - standby | column | Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.7 |
| cwpanIfHAFailureCode This object indicates the last failure code for the WPAN HA
associated with this given interface.
registrationFailed(1),
sessionMismatch(2),
modeMismatch(4),
proce… | column | Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.8 |
| cwpanIfHAStateChangeReason This object indicates the WPAN HA state change reason
associated with this given interface.
1 - invalid
2 - automatic
3 - manual | column | Enumeration | .1.3.6.1.4.1.9.9.819.1.1.1.1.9 |