CISCO-WAN-FEEDER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
14

cwfFeederTable

table
.1.3.6.1.4.1.351.150.15.1.1.1 · 1 row entry · 14 columns
Open in standard view 
This table contains the entries for the feeders.
It is used for addition or deletion of feeders and 
to support LMI on the feeders. The information in
these entries are advertised to LMI using a system 
dependent implementation when an entry is 
created/activated. This table can also be applicable 
to XLMI.
cwfFeederEntry entry .1.3.6.1.4.1.351.150.15.1.1.1.1
An entry in cwfFeederTable.
Indexes
cwfFeederIfNum
Column Syntax OID
cwfFeederIfNum
This is an unique interface number of an
ATM virtual interface. The value of this
object is equal to the ifIndex of the ATM
virtual interface interface identified by
ifType atmVirtual(149).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.351.150.15.1.1.1.1.1
cwfFeederName
This is the name of the feeder. It contains
a string of length zero, if the feeder name
is not available.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.351.150.15.1.1.1.1.2
cwfLanIP
This is the LAN IP address of the feeder.
This IP address is used for ethernet interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.351.150.15.1.1.1.1.3
cwfNetIP
This is the network IP address of the feeder.
This IP address is used for ATM interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.351.150.15.1.1.1.1.4
cwfRemoteShelf
This is the remote shelf number of the feeder
module.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.351.150.15.1.1.1.1.5
cwfRemoteSlot
This is the remote slot number of the feeder
module.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.150.15.1.1.1.1.6
cwfRemotePort
This is the remote physical port(line)
number of the feeder module.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.351.150.15.1.1.1.1.7
cwfFeederType
This identifies the feeeder type. fdrNON(12)
is applicable when cwfLMIType is xLMI(2).
Other values are applicable for cwfLMIType = feeder(1).

The possible values are:
fdrIPX -- Feeder is an IPX …
Enumeration
Enumerated Values:
1fdrIPX
2fdrBPX
3fdrIpxAF
4fdrBASIS
5fdrUNKNOWN
6fdrUNI
7fdrAPS
8fdrIGX
9fdrIgxAF
10fdrVSI
11fdrPAR
12fdrNON
 .1.3.6.1.4.1.351.150.15.1.1.1.1.8
cwfModelNumber
This identifies the feeder model number.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.150.15.1.1.1.1.9
cwfLMIAdminStatus
This provides the feeder LMI admin state
configuration capabilities for the desired
state of interface. The value of this object
is ignored during row creation.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.351.150.15.1.1.1.1.10
cwfLMIOperStatus
This provides the operational state of
the LMI connection.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.351.150.15.1.1.1.1.11
cwfFeederNodeAlarm
This identifies the feeder node alarm status.
It provides the alarm status in hierarchical order
where by if there are no feeder node alarms, it is
signified by <clear>. If minor alarms, with no major
alarms, it is s…
Enumeration
Enumerated Values:
1clear
2minor
3major
4critical
5unknown
 .1.3.6.1.4.1.351.150.15.1.1.1.1.12
cwfFeederRowStatus
This is used for adding or deleting a feeder entry.
The row can be created by setting this object to
'createAndGo(4)'. The row can be deleted by setting
this object to 'destroy(6)'.

No other values are…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.351.150.15.1.1.1.1.13
cwfLMIType
This identifies the LMI type. It identifies the
type of network to which the LMI port is connected
to.
Enumerationr/w
Enumerated Values:
1feeder
2xLMI
 .1.3.6.1.4.1.351.150.15.1.1.1.1.14