cwfFeederRowStatus
CISCO-WAN-FEEDER-MIB ·
.1.3.6.1.4.1.351.150.15.1.1.1.1.13
Object
This is used for adding or deleting a feeder entry.
The row can be created by setting this object to
'createAndGo(4)'. The row can be deleted by setting
this object to 'destroy(6)'.
No other values are supported.
Context
- MIB
- CISCO-WAN-FEEDER-MIB
- OID
.1.3.6.1.4.1.351.150.15.1.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cwfFeederEntry
- Table
- cwfFeederTable
- Siblings
- 13
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwfFeederIfNum This is an unique interface number of an
ATM virtual interface. The value of this
object is equal to the ifIndex of the ATM
virtual interface interface identified by
ifType atm… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.351.150.15.1.1.1.1.1 |
| cwfLMIAdminStatus This provides the feeder LMI admin state
configuration capabilities for the desired
state of interface. The value of this object
is ignored during row creation. | column | Enumeration | .1.3.6.1.4.1.351.150.15.1.1.1.1.10 |
| cwfLMIOperStatus This provides the operational state of
the LMI connection. | column | Enumeration | .1.3.6.1.4.1.351.150.15.1.1.1.1.11 |
| cwfFeederNodeAlarm This identifies the feeder node alarm status.
It provides the alarm status in hierarchical order
where by if there are no feeder node alarms, it is
signified by <clear>. If mino… | column | Enumeration | .1.3.6.1.4.1.351.150.15.1.1.1.1.12 |
| cwfLMIType This identifies the LMI type. It identifies the
type of network to which the LMI port is connected
to. | column | Enumeration | .1.3.6.1.4.1.351.150.15.1.1.1.1.14 |
| cwfFeederName This is the name of the feeder. It contains
a string of length zero, if the feeder name
is not available. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.351.150.15.1.1.1.1.2 |
| cwfLanIP This is the LAN IP address of the feeder.
This IP address is used for ethernet interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.351.150.15.1.1.1.1.3 |
| cwfNetIP This is the network IP address of the feeder.
This IP address is used for ATM interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.351.150.15.1.1.1.1.4 |
| cwfRemoteShelf This is the remote shelf number of the feeder
module. | column | Integer32 | .1.3.6.1.4.1.351.150.15.1.1.1.1.5 |
| cwfRemoteSlot This is the remote slot number of the feeder
module. | column | Integer32 | .1.3.6.1.4.1.351.150.15.1.1.1.1.6 |
| cwfRemotePort This is the remote physical port(line)
number of the feeder module. | column | Integer32 | .1.3.6.1.4.1.351.150.15.1.1.1.1.7 |
| cwfFeederType This identifies the feeeder type. fdrNON(12)
is applicable when cwfLMIType is xLMI(2).
Other values are applicable for cwfLMIType = feeder(1).
The possible value… | column | Enumeration | .1.3.6.1.4.1.351.150.15.1.1.1.1.8 |
| cwfModelNumber This identifies the feeder model number. | column | Integer32 | .1.3.6.1.4.1.351.150.15.1.1.1.1.9 |