CISCO-WAN-BBIF-ATM-CONN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
57

bbChanCnfGrpTable

table
.1.3.6.1.4.1.351.110.5.2.7.1.1 · 1 row entry · 53 columns
Open in standard view 
The Broadband Channel config table is for a channel on logical 
interface.  There will an entry for each of the channel added on the
logical partition of the physical line.
          
Following parameters are needed if the connection is from a 
PXM user port and policing is enabled. These apply to 
connection on PXM lines confiured as user port only.
          
   PCR/CDVT is used for GCRA1 and
   SCR/MBS is used for GCRA2
   UpcEnable
      UpcPCR
      UpcCDVT
   UpcSCRPolicing
     for CBR conns.
         UpcPCR0
         UpcCDVT0
     for non CBR conns.
         UpcSCR
         UpcMBS
bbChanCnfGrpEntry entry .1.3.6.1.4.1.351.110.5.2.7.1.1.1
The config table is for logical channel.
Indexes
bbChanCnfNum
Column Syntax OID
bbChanCnfNum
This identifies a channel on the PXM logical interface, used as
PXM port.
Integer32
Constraints:
range: 16-4111
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.1
bbChanRowStatus
This object is used for adding/deleting/modifying
entries in the table.

add(1) : Adds the entry.
delete(2) : Deletes the entry
modify(3) : Set this before modifying any entries in the table.
…
Enumerationr/w
Enumerated Values:
1add
2delete
3modify
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.2
bbChanConnType
This specifies the connection type
vpc(1) : Virtual Path Connection
vcc(2) : Virtual Channel Connection

This object can not be modified once the connection is created.
Enumerationr/w
Enumerated Values:
1vpc
2vcc
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.3
bbChanServiceType
This specifies the service type
cbr(1) : Constant Bit Rate
vbr(2) : Variable Bit Rate
abr(3) : Available Bit Rate
ubr(4) : Unspecified Bit Rate
vbr-rt(5): Variable Bit Rate - Real Time

This object…
Enumerationr/w
Enumerated Values:
1cbr
2vbr
3abr
4ubr
5vbr-rt
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.4
bbChanConnDesc
A string that has been defined to give a
descriptive name to the connection.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.5
bbChanSvcFlag
This specifies the connection type
svc(1) : SVC connection
pvc(2) : PVC connection, used by PAR(Portable Auto Route)
spvc(3) : Soft PVC connection, used by PNNI
Enumerationr/w
Enumerated Values:
1svc
2pvc
3spvc
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.6
bbChanSvcConnId
This connection ID is for future use Currently not supported.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.7
bbChanIfNum
Channel's logical Interface from which traffic of the connection
will be received.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.8
bbChanVpi
VPI for the connection.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.9
bbChanVci
VCI for the connection.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.10
bbChanUpcEnable
enables/disables UPC for Ingress cells.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.11
bbChanUpcPCR
PCR(0+1), Peak Cell Rate, specifies an upper bound on
rate at which traffic can be submitted on an ATM
connection. This object applies to the First Leaky
Bucket for leaving cells with Cell Loss Priority of 0 or 1.
. Uni…
Integer32r/w
Constraints:
range: 50-1412832
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.12
bbChanUpcCDVT
Compliant Cell Delay Variation. Also known as
CDVT(0+1), Cell Delay Variation Tolerance, which
specifies the maximum time period for accumulated
violations of cell-arrival time parameters. This object
applies to the Fir…
Integer32r/w
Constraints:
range: 1-5000000
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.13
bbChanUpcSCR
SCR, Sustainable Cell Rate, is an upper bound on the
conforming average rate of an ATM connection, over
time scales which are long relative to those for which
the PCR is defined. Enforcement of this bound by the UPC
cou…
Integer32r/w
Constraints:
range: 1-1412832
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.14
bbChanUpcMBS
Maximum Burst Size (MBS). Also known as Compliant Burst Size (CBS).
. Units: cells
. Applicable connection types:
. VBR, ABR
. Default: 1000
. Range : 1-5000000
Integer32r/w
Constraints:
range: 1-5000000
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.15
bbChanGcra1Action
GCRA1 Action.
1 = No Action
2 = Tag Untagged cells
3 = Tag untagged cells and discard tagged cells
4 = Discard all (0+1) non-comforming cells.
Enumerationr/w
Enumerated Values:
1noAction
2tagCells
3tagAndDiscard
4discardAllNonComformCells
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.16
bbChanGcra2Action
GCRA2 Action.
1 = No Action
2 = Tag Untagged cells
3 = Tag untagged cells and discard tagged cells
4 = Discard all (0+1) non-comforming cells.
Enumerationr/w
Enumerated Values:
1noAction
2tagCells
3tagAndDiscard
4discardAllNonComformCells
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.17
bbChanUpcSCRPolicing
Selects SCR policing for CLP = 0 or all cells.
Enumerationr/w
Enumerated Values:
1clp0
2clp0and1
3off
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.18
bbChanEfciThreshold
Threshold above which EFCI bit is to be set.
Default Value is 3/4 of max cell count.
Integer32r/w
Constraints:
range: 0-491520
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.19
bbChanDiscardOption
Enable Frame Discard or CLP Hysteresis.
Enumerationr/w
Enumerated Values:
1clpHysteresis
2frameDiscard
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.20
bbChanFrmDiscardThreshold
Ingress Frame Discard Threshold.
Valid only when Ingress Frame Discard option is selected.
Integer32r/w
Constraints:
range: 0-491520
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.21
bbChanClpHiThreshold
Ingress CLP High Threshold.
Default is 3/4 of max cell count.
Integer32r/w
Constraints:
range: 0-491520
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.22
bbChanClpLoThreshold
Ingress CLP Low Threshold. Valid only when
Ingress CLP Hysteresis option is selected.

Default Value is 1/2 of max cell count.
Integer32r/w
Constraints:
range: 0-491520
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.23
bbChanCongstUpdateCode
Ingress Channel Congestion Update Code.
Enumerationr/w
Enumerated Values:
1dontUpdate
2setCiBit
3setEfciBit
4clearEfciBit
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.24
bbChanMaxCellMemThreshold
Maximum number of cells of that connection in
the memory.
Assuming Total Cell Memory is 512K cells, this is defaulted to
half of total size.
Integer32r/w
Constraints:
range: 0-512000
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.25
bbChanIngrPercentUtil
Percentage Utilization of the IngrService Rate. This is used
for connection admission control.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.26
bbChanEgrPercentUtil
Percentage Utilization of the EgrService Rate.
This is used for egress bandwidth calculation and
connection admission control.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.27
bbChanEgrSrvRate
Egress service rate - This is used for egress bandwidth calculation
and for connection admission control. The actual value
depends on the speed of the logical interface.
Integer32r/w
Constraints:
range: 1-1412832
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.28
bbChanOvrSubOvrRide
Channel Over Subscrive Override
This MIB variable allows one to add a new connection on a port
even if it is over subscribed.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.29
bbChanLocalVpi
The VPI value for this channel.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.30
bbChanLocalVci
The VCI value for this channel.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.31
bbChanLocalNsapAddr
The Near End NSAP Address value for this channel.
IfNsapAddressr/w
Textual Convention: IfNsapAddress OctetString
Type Constraints:
range: 20
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.32
bbChanRemoteVpi
The VPI value for this channel.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.33
bbChanRemoteVci
The VCI value for this channel.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.34
bbChanRemoteNsapAddr
The Far End NSAP Address value for this channel.
IfNsapAddressr/w
Textual Convention: IfNsapAddress OctetString
Type Constraints:
range: 20
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.35
bbChanMaster
This is used by the PXM switch platform module,
to determine if this endpoint ia master or slave.
Enumerationr/w
Enumerated Values:
1master
2slave
3unknown
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.36
bbChanRtePriority
This is also known as class of service, it is used by
PXM to determine how important this connection is when
selecting connections to route.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.37
bbChanMaxCost
Maximum allowed cost. It is related to Cost Based Routing.
This is used by PXM so that it won't choose a path with a
cost greater than this configured level.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.38
bbChanRestrictTrkType
Restricted trunk type for routind, used by PXM.
It specifies that the connection either cannot be
routed over satellite trunks or terrestrial trunks,
or it can be on any type of trunk.
Enumerationr/w
Enumerated Values:
1noRestriction
2terrestrialTrunk
3satelliteTrunk
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.39
bbChanTestType
The chanTestType starts testing the continuity or delay
of a connection. It sends specific cell patterns toward
the network and the terminating end of this connection
has to be an AXIS or ASI of a BPX in order for th…
Enumerationr/w
Enumerated Values:
1testcon
2testdelay
3notest
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.40
bbChanTestState
This object provides the state of the test performed
on a connection.
When you add a connection then the chanTestState becomes notinprogress
and when you select any test, it would go to inprogress state and after
it co…
Enumeration
Enumerated Values:
1passed
2failed
3inprogress
4notinprogress
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.41
bbChanTestResult
This is round trip delay in milliseconds.
When you select testdelay option for the chanTestType,
the result of the test that is measured in milliseconds
can be read in chanTestResult.
millisecondsInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.42
bbChanTestTypeCPESide
The chanTestType starts testing the segment continuity
of a connection.
It sends OAM Segment loopback cell towards port side (CPE)
The CPE would loop back the cell
To test the continuity follow this procedure:
a- set c…
Enumerationr/w
Enumerated Values:
1testconseg
2notest
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.43
bbChanTestStateCPESide
This shows the state of the test
When you add a connection then the chanTestState becomes notinprogress
and when you select any test, it would go to inprogress state and after
it completes the test, it will go to failed…
Enumeration
Enumerated Values:
1passed
2failed
3inprogress
4notinprogress
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.44
bbConnVpcFlag
This represents the connection type, used for PXM to
identify VPC/VCC.
Enumerationr/w
Enumerated Values:
1vpc
2vcc
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.45
bbConnServiceType
This specifies the service type
1 ==> Constant Bit Rate
2 ==> Variable Bit Rate
4 ==> Unspecified Bit Rate
6 ==> Available Bit Rate ( standard )
8 ==> Variable Bit Rate - Real-Time

Note that thi…
Enumerationr/w
Enumerated Values:
1cbr
2vbr
4ubr
6abrstd
8vbrrt
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.46
bbConnPCR
Peak cell rate, could be derived from the end point parameter
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.47
bbConnSCR
Sustained cell rate, could be derived from the end point parameter
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.48
bbConnPercentUtil
This is the expected long-term utilization of the
channel by this end-point.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.49
bbRemoteConnPCR
Peak cell rate of the other end, if not set, will be
set to the same as local end PCR (bbChanUpcPCR). However,
note that if the PCRs for both local and remote end
are set to the different value (i.e., asymmetric conn),
…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.50
bbRemoteConnSCR
Sustained cell rate of the other end, if not set, will be
set to the same as local end SCR (bbChanUpcSCR). However,
note that if the PCRs for both local and remote end
are set to the different value (i.e., asymmetric co…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.51
bbRemoteConnPercentUtil
This is the expected long-term utilization of the
channel by this end-point. If this is not specified in
the connection setup request, it'll be defaulted to
100 percent
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.52
bbChanUpcMCR
SCR, Sustainable Cell Rate, is an upper bound on the
conforming average rate of an ATM connection, over
time scales which are long relative to those for which
the PCR is defined. Enforcement of this bound by the UPC
cou…
Integer32r/w
Constraints:
range: 1-1412832
 .1.3.6.1.4.1.351.110.5.2.7.1.1.1.53

bbChanStateGrpTable

table
.1.3.6.1.4.1.351.110.5.2.7.2.1 · 1 row entry · 4 columns
Open in standard view 
The Broadband Channel state table is for a channel on logical
interface.  There will an entry for each of the channel added on the
logical partition of the physical line.
bbChanStateGrpEntry entry .1.3.6.1.4.1.351.110.5.2.7.2.1.1
The state table is for logical channel.
The available number of channels on the broadband interface (user ports)
on the PXM card is restricted to 4K.

The PXM card has 2 Queue Engines ( QE0 and QE1).
Current…
Indexes
bbChanStateNum
Column Syntax OID
bbChanStateNum
Refers to the logical channel number.
Integer32
Constraints:
range: 16-4111
 .1.3.6.1.4.1.351.110.5.2.7.2.1.1.1
bbChanState
This variable indicates the state of the VC (channel).
Enumeration
Enumerated Values:
1notconfigured
2normal
3alarm
 .1.3.6.1.4.1.351.110.5.2.7.2.1.1.2
bbChanEgrXmtState
Indicates the status of port transmit(Egress).
Enumeration
Enumerated Values:
1other
2normal
3sendingAis
4sendingFerf
 .1.3.6.1.4.1.351.110.5.2.7.2.1.1.3
bbChanIngrRcvState
indicates the status of port receive(Ingress).
Enumeration
Enumerated Values:
1other
2normal
3receivingAis
4receivingFerf
5alarm
 .1.3.6.1.4.1.351.110.5.2.7.2.1.1.4