CISCO-VISM-DSX0-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
55

dsx0VismCnfTable

table
.1.3.6.1.4.1.351.110.4.7.1 · 1 row entry · 41 columns
Open in standard view 
The entries in this table are created and deleted 
implicitly at the time of adding and deleting the line.
For every DS0 on a line, one row will be created.
dsx0VismCnfEntry entry .1.3.6.1.4.1.351.110.4.7.1.1
This ds0 table contains both cas related
and non cas related parameters.

The non cas related parameters are applicable
accross all line signaling types, while the
following cas related parameters
are applic…
Indexes
ds0IfIndex
Column Syntax OID
ds0IfIndex
This attribute defines the index for this table.
This is derived from the following formula:
index = 31 * (Ds1# - 1) + ds0#

where : Ds1# - The T1/E1 line number in the range 1 - 8.
ds0# - …
Integer32
Constraints:
range: 1-248
 .1.3.6.1.4.1.351.110.4.7.1.1.1
ds0RobbedBitSignalling
This object indicates if Robbed Bit Signalling is
turned on or off for a given ds0. This only
applies to DS0s on a DS1 link. For E1 links the
value is always off (false). For T1 links, the default
value is true if th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.110.4.7.1.1.2
ds0IdleCode
This object contains the code transmitted in the
ABCD bits when the ds0 is not connected and
ds0TransmitCodesEnable is enabled. The object is
a bitmap and the various bit positions are:
Bit 0 (value 1) D bit
…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.351.110.4.7.1.1.3
ds0SeizedCode
This object contains the code transmitted in the
ABCD bits when the ds0 is connected and
ds0TransmitCodesEnable is enabled. The object is
a bitmap and the various bit positions are:
Bit 0 (value 1) D bit
Bit …
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.351.110.4.7.1.1.4
ds0ReceivedCode
This object contains the code being received in
the ABCD bits. The object is a bitmap and the
various bit positions are:
Bit 0 (value 1) D bit
Bit 1 (value 2) C bit
Bit 2 (value 4) B bit
…
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.351.110.4.7.1.1.5
ds0TransmitCodesEnable deprecated
This object determines if the idle and seized
codes are transmitted. If the value of this object
is true then the codes are transmitted.
This object is not applicable in the CAS backhaul
application.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.110.4.7.1.1.6
ds0BundleMapped
This object indicates endpoint number as specified
by mgEndpointNumber of endpoint table.
If it is not associated with any endpoint, then it
is set to -1.
It should be noted that the endpoint is associated
with bearer …
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.351.110.4.7.1.1.7
ds0IfType
This object indicates the interface type associated
with the ds0.
bearer(81) : ds0 ifType is considered as bearer if
the DS0 is used for carrying voice traffic.
ccs-signaling(63): ds0 ifType is considered a…
Enumeration
Enumerated Values:
1unknown
63ccs-signaling
81bearer
 .1.3.6.1.4.1.351.110.4.7.1.1.8
ds0CasVariantName
This object indicates the index to the CAS variant
table. This parameter can be configured after configuring
this ds0 as an endpoint. This object cannot be modified
while connections exist on this endpoint. The CAS var…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.351.110.4.7.1.1.9
ds0CasCadenceOnTime
This attribute describes the duration during which the digit
tone is generated.
This object is applicable only for CAS backhaul applications.
For trunking application it is not applicable.
The value is expresssed in un…
Integer32r/w
Constraints:
range: 2-9999
 .1.3.6.1.4.1.351.110.4.7.1.1.10
ds0CasCadenceOffTime
This attribute corresponds to the silence between the
digit tones.
This object is applicable only for CAS backhaul applications.
For trunking application it is not applicable.
The value is expresssed in units of millis…
Integer32r/w
Constraints:
range: 0-9999
 .1.3.6.1.4.1.351.110.4.7.1.1.11
ds0InsertLocalCas
This object tells the framer whether to force the cas bits
to a value defined by ds0LocalCasPattern or not.

If this is enabled the framer will force the cas (ABCD) bits
to a value defined in ds0LocalC…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.110.4.7.1.1.12
ds0LocalCasPattern
This object contains the pattern that the cas (ABCD) bits will have
when ds0InsertLocalCas is enabled.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.351.110.4.7.1.1.13
ds0LoopbackCommand
This object represents the loopback type at the ds0 level.The
ds0 configuration overrides the line level configuration.

NoLoop
There is no loopback on this ds0.

LocalLoop
…
Enumerationr/w
Enumerated Values:
1noLoop
2remoteLoop
3localLoop
 .1.3.6.1.4.1.351.110.4.7.1.1.14
ds0CasParameterSource
This object indicates VISM whether to read the cas related
timer parameters from the casAppl file downloaded for that
endpoint or to read from this mib.

This gives the flexibility of configuring
differ…
Enumerationr/w
Enumerated Values:
1casAppl
2mibValue
 .1.3.6.1.4.1.351.110.4.7.1.1.15
ds0CasOnHookMinMakeTime
This indicates the the minimum time in msecs
for which the on hook pattern should be present in order for it
to be recognised else the signal will be considered to be a
spurious signal and will be ignored.
…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.16
ds0CasOffHookMinMakeTime
This indicates the minimum time in msecs for
which the off hook pattern should be present in order for it to be
recognised else the signal will be considered to be a spurious signal
and will be ignored.
…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.17
ds0CasWinkMinMakeTime
The wink consists of off-hook A-B bit pattern, followed
by on-hook A-B bit pattern in timed sequence.
This object indicates the minimum duration for which
the off-hook part of wink signal should persist.

…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.18
ds0CasWinkMaxMakeTime
The wink consists of off-hook A-B bit pattern, followed
by on-hook A-B bit pattern in timed sequence.
This object indicates the maximum duration for which the
off-hook part of the wink signal should persist, if it
exc…
millisescondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.19
ds0CasWinkBreakTime
The wink consists of off-hook A-B bit pattern,
followed by on-hook A-B bit pattern in timed sequence.
This object indicates the minimum duration for which
the on-hook part of wink signal should persist.

…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.20
ds0CasGlareTime
When the terminating gateway receives off Hook event
from the Call Agent it starts the timer specified in
this object to see if the terminating side is also
trying to originate a call. If this is true, we have
a 'glare…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.21
ds0CasGaurdTime
The gaurd time is the duration between the end of one call
and the start of next call. This object specifies what should
be such a duration. All state changes from the PBX are ignored
for this duration. After receiving…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.22
ds0CasDelayImmedStart
This timer indicates the time that VISM should wait before
outpulsing digits to the PBX after sending an off hook event.
This applies only to immediate start protocol.

This object cannot be configured i…
millisecondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.4.7.1.1.23
ds0SignalingType
This attribute indicates the type of signaling on the line
to which this ds0 belongs.

CAS - Channel Associated Signaling
CCS - Common Channel Signaling
none - no signaling used.

This …
Enumeration
Enumerated Values:
1cas
2ccs
3none
 .1.3.6.1.4.1.351.110.4.7.1.1.24
ds0CasMinDelayDialTime
This is an object for an E & M signaling protocol like
wink-start for this ds0. The difference is that the
address-control signal is different from wink.
The originating VISM, on receiving a seize (AB=11) from the
P…
millisecondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.4.7.1.1.25
ds0CasMinStartDialTime
This is an object for an E & M signaling protocol like
wink-start for this ds0. The difference is that the
address-control signal is different from wink. The originating
VISM, on receiving a seize (AB=11) from the P…
millisecondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.4.7.1.1.26
ds0CasFlashMinMakeTime
Flash is a CAS signal generated by users to request
special services. The interpretation of the flash
depends on the protocol in use. The signal itself
is an on-hook followed by an off-hook. This object
specifies th…
millisecondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.4.7.1.1.27
ds0CasFlashMaxMakeTime
Flash is a CAS signal generated by users to request
special services. The interpretation of the flash
depends on the protocol in use. The signal itself is
an on-hook followed by an off-hook. This object specifies
th…
millisecondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.4.7.1.1.28
ds0CasDirectionality
This object specifies the direction in which CAS calls
will be accepted on this endpoint. If this object is set to

bidirectional(1): VISM can send and receive calls on this
endpoint
…
Enumerationr/w
Enumerated Values:
1bidirectional
2incoming
3outgoing
 .1.3.6.1.4.1.351.110.4.7.1.1.29
ds0CasGlarePolicy
This object specifies how a bidirectional endpoint should
resolve glare. This object will be used only if
dsx0VismDirectionality of the endpoint is 'bidirectional'.
When glare is detected, if this object is set to cont…
Enumerationr/w
Enumerated Values:
1controlling
2releasing
 .1.3.6.1.4.1.351.110.4.7.1.1.30
ds0CasIncomingMgcpPackage
This object, in conjunction with the card level
persistentXgcpEventsTable, controls how persistent
CAS events (like seize, disconnect, etc) related
to an incoming call observed on this DS0 are notified to
the Media…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.351.110.4.7.1.1.31
ds0CasOutgoingMgcpPackage
This object, in conjunction with the card level
persistentXgcpEventsTable, controls how persistent
CAS events (like answer, disconnect, etc) related
to an outgoing call observed on this DS0 are notified to the
Media…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.351.110.4.7.1.1.32
ds0InputGain
This object indicates the amount of gain inserted at the
receiver side of a ds0 channel, in dB (decibel) units.
The default value of this object is 0 dB.

The input gain settings only define a gain/loss r…
dB - decibelInteger32r/w
Constraints:
range: -6-14
 .1.3.6.1.4.1.351.110.4.7.1.1.33
ds0OutputAttenuation
This object contains the amount of attenuation inserted
at the transmit side of a ds0 channel, in dB (decibel) units.

The output attenuation settings only define a loss relative to
0 dB setting. The abs…
dB - decibelInteger32r/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.351.110.4.7.1.1.34
ds0MusicThreshold
The indicates Music On Hold Threshold in dBm. Based on this
value, VISM DSP will interprete the incoming signal from TDM side
as either silence or voice, and consequently turn on or off VAD.

This object…
Integer32r/w
Constraints:
range: -70--30
 .1.3.6.1.4.1.351.110.4.7.1.1.35
ds0SidPacket
This object specifies whether the Silence Indication
Detection (SID) packet should be generated when silence
suppression is in active mode. The SID packet indicates
the noise level during silence, which is used as a …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.110.4.7.1.1.36
ds0ExecDiag
This object indicates the status of DSP channel level
RAS on the VISM. When it is enable VISM will configure
the DSP through HOST-DSP message on the individual channel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.110.4.7.1.1.37
ds0Companding
This object indicates whether input from / output
to the TDM side of DS0 is u-law or a-law stream.
The setting of this object will not take effect
unless the corresponding DSP channel is closed and
re-opened.
Enumerationr/w
Enumerated Values:
1uLaw
2aLaw
 .1.3.6.1.4.1.351.110.4.7.1.1.38
ds0RxCasTransTblName
This object identifies the template name 'cvcmCasTemplateName'
in the CISCO-VOICE-CAS-MODULE-MIB associated with the receive
signaling channel on a DS0.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.351.110.4.7.1.1.39
ds0TxCasTransTblName
This object identifies the template name
'cvcmCasTemplateName' in the CISCO-VOICE-CAS-MODULE-MIB
associated with the transmit signaling channel
on a DS0.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.351.110.4.7.1.1.40
ds0TxRxCasConfig
This object indicates configuration on a DS0.
'transmit'- Configure transmit signaling channel
on the DSP with user defined CAS
pattern to translate incoming ABCD
…
Enumerationr/w
Enumerated Values:
1transmit
2receive
3bidirectional
4none
 .1.3.6.1.4.1.351.110.4.7.1.1.41

dsx0VismChanMapTable

table
.1.3.6.1.4.1.351.110.4.7.2 · 1 row entry · 3 columns
Open in standard view 
This table is created implicitly at the time of 
creating and deleting the endpoints.
This table provides the mapping information from a line
and channel to obtain an index for that channel.
dsx0VismChanMapEntry entry .1.3.6.1.4.1.351.110.4.7.2.1
Each entry represents the mapping from dsx1Line number
to ds0 channel Number and provides the ifIndex mapping.
Indexes
dsx1LineNum ds0ChanNum
Column Syntax OID
dsx1LineNum
This object describes the physical line number on
VISM card.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.351.110.4.7.2.1.1
ds0ChanNum
This object describes the ds0 number or channel number
within a T1 or E1 line.
The valid channel numbers are 1 to 24 for T1 line
and 1 - 31 for E1 line.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.351.110.4.7.2.1.2
ds0ChanMapIfIndex
This object describes the ifIndex derived based on the
line number and the channel number within the line according
to the formula:
IfIndex = 31 * (Ds1# - 1) + ds0#

where : Ds1# - The T1/E1 line number …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.4.7.2.1.3

vismDs0LineStatsTable

table
.1.3.6.1.4.1.351.110.4.7.3 · 1 row entry · 7 columns
Open in standard view 
This table contains information on DS0s configured
on DS1 interface.
vismDs0LineStatsEntry entry .1.3.6.1.4.1.351.110.4.7.3.1
An entry in the vismDs0LineStatsTable.
Each entry contains following information
applicable for each DS1 interface:
Total DS0s
Free DS0s
Active DS0s
Blocked DS0s.
Indexes
ds0LineNum
Column Syntax OID
ds0LineNum
This object is the identifier of a DS1/E1 Interface on
a managed device. The number of entries is 8 in a VISM
and VISM-PR card.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.351.110.4.7.3.1.1
lineTotalDs0Count
This is the total number of ds0s configured on this
DS1 line.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.351.110.4.7.3.1.2
lineFreeDs0Count
This is the total number of free ds0s on this
DS1 line.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.351.110.4.7.3.1.3
lineActiveDs0Count
This is the number of active ds0s on this line.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.351.110.4.7.3.1.4
lineBlockDs0Count
This is the number of blocked ds0s on this line.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.351.110.4.7.3.1.5
lineActiveHighWaterMark
This is the high water mark number of ds0s that
were active simultaneously on the line.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.351.110.4.7.3.1.6
lineStatsClrButton
This variable is used to clear the vism Ds0 line
status entry. 1 = No action, 2 = Clear alarm.
Enumerationr/w
Enumerated Values:
1noaction
2clear
 .1.3.6.1.4.1.351.110.4.7.3.1.7

vismDs0StatusTable

table
.1.3.6.1.4.1.351.110.4.7.4 · 1 row entry · 4 columns
Open in standard view 
This table contains ds0 status information on a
DS1 interface.
vismDs0StatusEntry entry .1.3.6.1.4.1.351.110.4.7.4.1
An entry in the Ds0 Status Table.
Indexes
ds0LineNumber ds0Number
Column Syntax OID
ds0LineNumber
This object is the identifier of a DS1/E1 Interface
on a managed device. The number of entries is 8 in a
VISM and VISM-PR card.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.351.110.4.7.4.1.1
ds0Number
This object identifies the ds0 number on a
DS1 interface.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.351.110.4.7.4.1.2
ds0Status
This object is the status of the ds0. idle - This ds0
is in idle state. busy - This ds0 is in busy state.
Ds0 enters this state when it is in the process of
being setup for a call. fault - This ds0 is in fault(alarm)
…
Enumeration
Enumerated Values:
1idle
2busy
3fault
4block
5unknown
 .1.3.6.1.4.1.351.110.4.7.4.1.3
ds0StatusClrButton
This variable is used to clear the vism Ds0
status. 1 = No action, 2 = Clear alarm
Enumerationr/w
Enumerated Values:
1noaction
2clear
 .1.3.6.1.4.1.351.110.4.7.4.1.4