CISCO-TELEPRESENCE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
48

ctpPeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.1 · 1 row entry · 5 columns
Open in standard view 
The table contains system peripheral information.
          
An entry in this table has a corresponding entry,
INDEX-ed by the same value of ctpPeripheralIndex,
in the table relevant to the type of interface:
    ctpEtherPeripheralStatusTable for Ethernet,
    ctpHDMIPeripheralStatusTable for HDMI or
    ctpDVIPeripheralStatusTable for DVI.
ctpPeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.1.1
An entry contains information about one peripheral which is
configured or detected by a Telepresence system.
Indexes
ctpPeripheralIndex
Column Syntax OID
ctpPeripheralIndex
This object specifies a unique index for a peripheral
which is attached to a Telepresence system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.1.1.1
ctpPeripheralDescription
This object specifies a description of the attached peripheral.

Peripheral description may be the peripheral type, model and/or
version information or a peripheral signal description.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.643.1.2.1.1.2
ctpPeripheralStatus
This object specifies a peripheral status.
CtpPeripheralStatusCode
Textual Convention: CtpPeripheralStatusCode Enumeration
Type Values:
0noError
1other
2cableError
3powerError
4mgmtSysConfigError
5systemError
6deviceError
7linkError
8commError
9detectionDisabled
 .1.3.6.1.4.1.9.9.643.1.2.1.1.3
ctpPeripheralDeviceCategory
This object specifies a peripheral category of a device.
CtpPeripheralDeviceCategoryCode
Textual Convention: CtpPeripheralDeviceCategoryCode Enumeration
Type Values:
0unknown
1other
2uplinkDevice
3ipPhone
4camera
5display
6secCodec
7docCamera
8projector
9dviDevice
10presentationCodec
11auxiliaryControlUnit
12audioExpansionUnit
13microphone
14headset
15positionMic
16digitialMediaSystem
17auxHDMIOutputDevice
18uiDevice
19auxHDMIInputDevice
20bringYourOwnDevice
 .1.3.6.1.4.1.9.9.643.1.2.1.1.4
ctpPeripheralDeviceNumber
This object specifies a device number for a peripheral.

Device number is unique within the same peripheral device
category.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.1.1.5

ctpEtherPeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.2 · 1 row entry · 5 columns
Open in standard view 
The table contains information about all peripherals
connected to the system via Ethernet port.
ctpEtherPeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.2.1
An entry contains information about one peripheral
attached to the Telepresence system via Ethernet.
Indexes
ctpPeripheralIndex ctpEtherPeripheralIndex
Column Syntax OID
ctpEtherPeripheralIndex
This object specifies a unique number for a peripheral
Ethernet interface.

If no peripheral has more than one Ethernet interface, this
object will have value '1'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.2.1.1
ctpEtherPeripheralIfIndex
The object specifies an index value that uniquely identifies
the interface to which this entry is applicable. The
interface identified by a particular value of this index is
the same interface as identified by the same…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.643.1.2.2.1.2
ctpEtherPeripheralAddrType
This object specifies the type of address contained
in the corresponding instance of ctpEtherPeripheralAddr.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.643.1.2.2.1.3
ctpEtherPeripheralAddr
This object specifies the address of the attached peripheral
in the format given by the corresponding instance of
ctpEtherPeripheralAddrType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.643.1.2.2.1.4
ctpEtherPeripheralStatus
This object specifies attached peripheral status retrieved via
Ethernet port.
CtpPeripheralStatusCode
Textual Convention: CtpPeripheralStatusCode Enumeration
Type Values:
0noError
1other
2cableError
3powerError
4mgmtSysConfigError
5systemError
6deviceError
7linkError
8commError
9detectionDisabled
 .1.3.6.1.4.1.9.9.643.1.2.2.1.5

ctpHDMIPeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.3 · 1 row entry · 3 columns
Open in standard view 
The table contains information about all peripherals
connected to the system via HDMI.
ctpHDMIPeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.3.1
An entry contains information about one Telepresence
HDMI peripheral.
Indexes
ctpPeripheralIndex ctpHDMIPeripheralIndex
Column Syntax OID
ctpHDMIPeripheralIndex
This object specifies a unique number for a peripheral HDMI.

If no peripheral has more than one HDMI, this
object will have value '1'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.3.1.1
ctpHDMIPeripheralCableStatus
This object specifies cable status of an attached peripheral.

This object is set to 'loose' if system detects cable is
'unplugged' but power is 'on'.
CtpPeripheralCableCode
Textual Convention: CtpPeripheralCableCode Enumeration
Type Values:
1plugged
2loose
3unplugged
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.3.1.2
ctpHDMIPeripheralPowerStatus
This object specifies power status of an attached peripheral.

This object is set to 'unknown' if system detects cable is
'unplugged'.
CtpPeripheralPowerCode
Textual Convention: CtpPeripheralPowerCode Enumeration
Type Values:
1on
2standby
3off
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.3.1.3

ctpDVIPeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.4 · 1 row entry · 2 columns
Open in standard view 
The table contains information about all peripherals
connected to the system via DVI.
ctpDVIPeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.4.1
An entry contains information about one peripheral
attached to the Telepresence system via DVI.
Indexes
ctpPeripheralIndex ctpDVIPeripheralIndex
Column Syntax OID
ctpDVIPeripheralIndex
This object specifies a unique number for a peripheral DVI.

If no peripheral has more than one DVI, this
object will have value '1'.

Note that some Telepresence systems have no DVI port an…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.4.1.1
ctpDVIPeripheralCableStatus
This object specifies attached device
cable status reported by DVI.
CtpPeripheralCableCode
Textual Convention: CtpPeripheralCableCode Enumeration
Type Values:
1plugged
2loose
3unplugged
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.4.1.2

ctpRS232PeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.5 · 1 row entry · 3 columns
Open in standard view 
The table contains information about all peripherals
connected to the system via RS-232.
ctpRS232PeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.5.1
An entry contains information about one peripheral
attached to the Telepresence system via RS-232.
Indexes
ctpPeripheralIndex ctpRS232PeripheralIndex
Column Syntax OID
ctpRS232PeripheralIndex
This object specifies a unique number for a peripheral RS-232.

If no peripheral has more than one RS-232, this
object will have value '1'.

Note that some Telepresence systems have no RS-23…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.5.1.1
ctpRS232PortIndex
The object specifies an index value that uniquely identifies
the RS-232 port to which this entry is applicable.
Its value is the same as RS-232-MIB's rs232PortIndex for
the port.

If RS-232-MIB is not supp…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.643.1.2.5.1.2
ctpRS232PeripheralConnStatus
This object specifies peripheral which is
connected via RS232.

When the object is 'connected(1)', peripheral connection
via RS232 is working properly.
When the object is 'unknown(2)', peripheral connecti…
Enumeration
Enumerated Values:
1connected
2unknown
 .1.3.6.1.4.1.9.9.643.1.2.5.1.3

ctpPeripheralAttributeTable

table
.1.3.6.1.4.1.9.9.643.1.2.6 · 1 row entry · 3 columns
Open in standard view 
The table contains information about attributes for the
peripherals which are connected to the system. Peripheral
attribute may specify peripheral's component information,
for example, an entry may specify lifetime of a lamp
on a presentation device.
ctpPeripheralAttributeEntry entry .1.3.6.1.4.1.9.9.643.1.2.6.1
An entry contains information about one peripheral
attribute related to the peripheral specified by
ctpPeripheralIndex.
Indexes
ctpPeripheralIndex ctpPeripheralAttributeIndex
Column Syntax OID
ctpPeripheralAttributeIndex
This object specifies a unique number for a peripheral
attribute.

If no peripheral has more than one attribute, this
object will have value '1'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.6.1.1
ctpPeripheralAttributeDescr
This object specifies description of a attribute.
The supported attributes are
lampOperTime(1) -- indicate the lamp operating time
of a peripheral
lampState(2) -- indicat…
Enumeration
Enumerated Values:
1lampOperTime
2lampState
3powerSwitchState
 .1.3.6.1.4.1.9.9.643.1.2.6.1.2
ctpPeripheralAttributeValue
This object specifies value of the attribute corresponding
to ctpPeripheralAttributeDescr.
The possible value of the supported attributes is listed as
the following:
Attribute Unit SYNTAX
----------------…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.6.1.3

ctpUSBPeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.7 · 1 row entry · 5 columns
Open in standard view 
This table contains information about all the peripherals
connected to the system via USB.
ctpUSBPeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.7.1
An entry drescribes a peripheral connected to the Telepresence
system through USB.
Indexes
ctpPeripheralIndex ctpUSBPeripheralIndex
Column Syntax OID
ctpUSBPeripheralIndex
This object indicates an arbitrary positive, integer-value that
uniquely identifies the USB peripheral.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.7.1.1
ctpUSBPeripheralCableStatus
This object indicates the status of the cable attaching the USB
peripheral.
CtpPeripheralCableCode
Textual Convention: CtpPeripheralCableCode Enumeration
Type Values:
1plugged
2loose
3unplugged
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.7.1.2
ctpUSBPeripheralPowerStatus
This object indicates the source of power for the
attached USB peripheral:

'unknown' - The source of power is unknown.
'self' - The USB peripheral is externally powered.
'bus' - The USB peripheral is po…
Enumeration
Enumerated Values:
1unknown
2self
3bus
4both
 .1.3.6.1.4.1.9.9.643.1.2.7.1.3
ctpUSBPeripheralPortType
This object indicates the type of device
connected to the USB port:

'host' - no device os connected to the port
'device' - a usb device is connected to the port
'hub' - a usb hub is connected to the port
Enumeration
Enumerated Values:
1host
2device
3hub
 .1.3.6.1.4.1.9.9.643.1.2.7.1.4
ctpUSBPeripheralPortRate
This object indicates the current operational rate of
the USB peripheral:

'unknown' - The USB port rate is unknown
'low' - The USB port rate is at 1.5 Mbps.
'full' - The USB port rate is at 12 Mbps.
'hi…
Enumeration
Enumerated Values:
1low
2full
3high
 .1.3.6.1.4.1.9.9.643.1.2.7.1.5

ctp802dot11PeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.8 · 1 row entry · 6 columns
Open in standard view 
The table contains information about all peripherals
connected to the system via 802dot11.
ctp802dot11PeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.8.1
An entry describes one Telepresence 802dot11 peripheral.
Indexes
ctpPeripheralIndex ctp802dot11PeripheralIndex
Column Syntax OID
ctp802dot11PeripheralIndex
This object indicates an arbitrary positive, integer-value that
uniquely identifies the IEEE 802.11 peripheral.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.8.1.1
ctp802dot11PeripheralIfIndex
This object indicates an index value that uniquely identifies
the interface to which this entry is applicable.

If this entry doesn't have corresponding ifIndex, then this
value will have value '0'.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.643.1.2.8.1.2
ctp802dot11PeripheralAddrType
This object indicates the type of address indicated by the
corresponding instance of ctp802dot11PeripheralAddr.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.643.1.2.8.1.3
ctp802dot11PeripheralAddr
This object indicates the address of the attached peripheral
in the format indicated by the corresponding instance of
ctp802dot11PeripheralAddrType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.643.1.2.8.1.4
ctp802dot11PeripheralLinkStrength
This object indicates the link strength of an IEEE 802.11 link
for a peripheral. A return value of 0 indicates the link is not
connected. A return value between 1 - 5 indicates the strength
of the link, with 1 being the…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.8.1.5
ctp802dot11PeripheralLinkStatus
This object indicates the link status of the attached
peripheral via IEEE 802.11 link.
CtpPeripheralCableCode
Textual Convention: CtpPeripheralCableCode Enumeration
Type Values:
1plugged
2loose
3unplugged
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.8.1.6

ctpDPPeripheralStatusTable

table
.1.3.6.1.4.1.9.9.643.1.2.9 · 1 row entry · 3 columns
Open in standard view 
The table contains information about all peripherals
connected to the system via DP.
ctpDPPeripheralStatusEntry entry .1.3.6.1.4.1.9.9.643.1.2.9.1
An entry contains information about one Telepresence
DP peripheral.
Indexes
ctpPeripheralIndex ctpDPPeripheralIndex
Column Syntax OID
ctpDPPeripheralIndex
This object indicates a unique number for a peripheral DP.

If no peripheral has more than one DP, this
object will have value '1'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.2.9.1.1
ctpDPPeripheralCableStatus
This object indicates the cable status of a peripheral which
is attached to the system via Display Port interface.

This object returns 'loose' if system detects cable is
'unplugged' but power is 'on'.
CtpPeripheralCableCode
Textual Convention: CtpPeripheralCableCode Enumeration
Type Values:
1plugged
2loose
3unplugged
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.9.1.2
ctpDPPeripheralPowerStatus
This object indicates the power status of a peripheral which
is attached to the system via Display Port interface.

This object returns 'unknown' if system detects cable is
'unplugged'.
CtpPeripheralPowerCode
Textual Convention: CtpPeripheralPowerCode Enumeration
Type Values:
1on
2standby
3off
4unknown
5internalError
 .1.3.6.1.4.1.9.9.643.1.2.9.1.3

ctpPeripheralErrorHistoryTable

table
.1.3.6.1.4.1.9.9.643.1.3.3 · 1 row entry · 6 columns
Open in standard view 
This table contains a history of the detected peripheral
status changes.
          
After a management agent restart, when sysUpTime is reset to
zero, this table records all notifications until such time as 
it becomes full. Thereafter, it remains full by retaining the 
number of most recent notifications specified in 
ctpPeripheralErrorHistTableSize.
ctpPeripheralErrorHistoryEntry entry .1.3.6.1.4.1.9.9.643.1.3.3.1
An entry contains information about a Telepresence
peripheral status changes.
Indexes
ctpPeripheralErrorHistoryIndex
Column Syntax OID
ctpPeripheralErrorHistoryIndex
A unique non-zero integer value that identifies a
CtpPeripheralErrorHistoryEntry in the table.

The value of this index starts from '1' and monotonically
increases for each peripheral error known to the ag…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.9.643.1.3.3.1.1
ctpPeripheralErrorIndex
The object specifies the value of ctpPeripheralIndex of a
peripheral which is in error state.

This object is deprecated in favor of
ctpPeripheralErrorDeviceCategory and
ctpPeripheralErrorDeviceNumber.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.3.3.1.2
ctpPeripheralErrorStatus
This object specifies the peripheral status after its status
changed.
CtpPeripheralStatusCode
Textual Convention: CtpPeripheralStatusCode Enumeration
Type Values:
0noError
1other
2cableError
3powerError
4mgmtSysConfigError
5systemError
6deviceError
7linkError
8commError
9detectionDisabled
 .1.3.6.1.4.1.9.9.643.1.3.3.1.3
ctpPeripheralErrorTimeStamp
This object specifies the value of the sysUpTime object at the
time the notification was generated.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.643.1.3.3.1.4
ctpPeripheralErrorDeviceCategory
The object specifies peripheral device category after its
status changed.
CtpPeripheralDeviceCategoryCode
Textual Convention: CtpPeripheralDeviceCategoryCode Enumeration
Type Values:
0unknown
1other
2uplinkDevice
3ipPhone
4camera
5display
6secCodec
7docCamera
8projector
9dviDevice
10presentationCodec
11auxiliaryControlUnit
12audioExpansionUnit
13microphone
14headset
15positionMic
16digitialMediaSystem
17auxHDMIOutputDevice
18uiDevice
19auxHDMIInputDevice
20bringYourOwnDevice
 .1.3.6.1.4.1.9.9.643.1.3.3.1.5
ctpPeripheralErrorDeviceNumber
The object specifies peripheral device number after its
status changed.

Device number is unique within the same peripheral device
category.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.3.3.1.6

ctpSysUserAuthFailHistoryTable

table
.1.3.6.1.4.1.9.9.643.1.3.6 · 1 row entry · 7 columns
Open in standard view 
This table contains a history of detected user
authentication failures.
          
After a management agent restart, when sysUpTime is reset
to zero, this table records all user authentication failure
notifications until such time as it becomes full. Thereafter,
it remains full by retaining the number of most recent
notifications specified in ctpSysUserAuthFailHistTableSize.
ctpSysUserAuthFailHistoryEntry entry .1.3.6.1.4.1.9.9.643.1.3.6.1
An entry contains information about a Telepresence
system user authentication failure.
Indexes
ctpSysUserAuthFailHistoryIndex
Column Syntax OID
ctpSysUserAuthFailHistoryIndex
A unique non-zero integer value that identifies a
CtpSysUserAuthFailHistoryEntry in the table.

The value of this index starts from '1' and monotonically
increases for each system authentication failure ev…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.9.643.1.3.6.1.1
ctpSysUserAuthFailSourceAddrType
The object specifies the type of address contained
in the corresponding instance of ctpSysUserAuthFailSourceAddr.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.643.1.3.6.1.2
ctpSysUserAuthFailSourceAddr
The object specifies the source address when the
user authentication failure occurred, in the format given by
the corresponding instance of ctpSysUserAuthFailSourceAddrType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.643.1.3.6.1.3
ctpSysUserAuthFailSourcePort
The object specifies the source TCP/UDP port number
when a user authentication failure occurred.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.643.1.3.6.1.4
ctpSysUserAuthFailUserName
The object specifies the user name which was used to gain
system access when authentication failure occurred.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.643.1.3.6.1.5
ctpSysUserAuthFailAccessProtocol
This object specifies the access protocol when a user
authentication failure occurred.
CtpSystemAccessProtocol
Textual Convention: CtpSystemAccessProtocol Enumeration
Type Values:
1http
2snmp
3ssh
 .1.3.6.1.4.1.9.9.643.1.3.6.1.6
ctpSysUserAuthFailTimeStamp
This object specifies the value of the sysUpTime object at the
time the notification was generated.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.643.1.3.6.1.7