CISCO-SME-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
25

cSmeClusterTable

table
.1.3.6.1.4.1.9.9.632.1.1.1 · 1 row entry · 7 columns
Open in standard view 
This table lists all the SME clusters that are configured
on this device. As with any important service, user requires
that it provides some level of fault tolerant in a graceful
manner. SME provides this by allowing encryption nodes to be
grouped into cluster. Nodes in the same cluster immediately 
pick up the work of a failed node so user does not see 
service disruption.
cSmeClusterEntry entry .1.3.6.1.4.1.9.9.632.1.1.1.1
A conceptual row in the cSmeClusterTable. Each
row represents a SME cluster in the system and
provides the runtime and configuration information
of a cluster.
Indexes
cSmeClusterId
Column Syntax OID
cSmeClusterId
Globally unique index that identifies a SME cluster.
This index must be generated in such a way that the
same value is never reused even after cluster has been
deleted.
CiscoSmeClusterIndex
Textual Convention: CiscoSmeClusterIndex OctetString
Type Constraints:
range: 32
 .1.3.6.1.4.1.9.9.632.1.1.1.1.1
cSmeClusterName
The name of the SME cluster.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.632.1.1.1.1.2
cSmeClusterState
The operational state of the SME cluster.
CiscoSmeClusterStatus
Textual Convention: CiscoSmeClusterStatus Enumeration
Type Values:
1unknown
2inactive
3degraded
4recovery
5active
 .1.3.6.1.4.1.9.9.632.1.1.1.1.3
cSmeClusterMasterInetAddrType
The type of Internet address of the SME cluster
master. The Internet address of SME cluster master is
specified by the value of the corresponding instance
of cSmeClusterMasterInetAddr.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.632.1.1.1.1.4
cSmeClusterMasterInetAddr
The Internet address of the SME cluster master
device. The type of this Internet address is
determined by the value of the corresponding
instance of cSmeClusterMasterInetAddrType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.632.1.1.1.1.5
cSmeClusterStorageType
This object specifies the storage type for this conceptual
row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.632.1.1.1.1.6
cSmeClusterRowStatus
The status of this conceptual row.

There is no restriction on the value of other columns
before a newly created row can be made active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.632.1.1.1.1.7

cSmeClusterMembersTable

table
.1.3.6.1.4.1.9.9.632.1.1.2 · 1 row entry · 7 columns
Open in standard view 
This table lists the information of devices, local or
remote, which are members of SME clusters configured on a
device.
cSmeClusterMembersEntry entry .1.3.6.1.4.1.9.9.632.1.1.2.1
A conceptual row in the cSmeClusterMembersTable.
Each row represents a member device within a
specified SME Cluster.
Indexes
cSmeClusterId cSmeMemberInetAddrType cSmeMemberInetAddr
Column Syntax OID
cSmeMemberInetAddrType
The type of Internet address of a cluster member within
a specified SME cluster. The Internet address of this
device is specified by the value of the corresponding
instance of cSmeMemberInetAddr.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.632.1.1.2.1.1
cSmeMemberInetAddr
The Internet address of the cluster member device
within a specified SME cluster.
The type of this Internet address is determined
by the value of the corresponding instance of
cSmeMemberInetAddrType.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.632.1.1.2.1.2
cSmeFabric
Refers to the name of physical fibre channel fabric in the
SAN. A typical SAN deployment consists of a dual fabric
topology which corresponds to two physical fabrics.
In such a deployment, a VSAN and a cluster is conf…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.632.1.1.2.1.3
cSmeIsMemberLocal
Identifies if the device is a local or remote member of
this cluster.
'true' means this device is a local device.
'false' means this device is a remote device.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.632.1.1.2.1.4
cSmeMemberIsMaster
Indicates if this device is currently the master of
the SME cluster.

The value 'true' means this device is the master.
The value 'false' means this device is not the master.

Devices in a cl…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.632.1.1.2.1.5
cSmeClusterMemberStorageType
This object specifies the storage type for this conceptual
row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.632.1.1.2.1.6
cSmeClusterMemberRowStatus
The status of this conceptual row.

There is no restriction on the value of other columns
before a newly created row can be made active.

When a cluster is deleted, all entries in this table
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.632.1.1.2.1.7

cSmeClusterMemberIfTable

table
.1.3.6.1.4.1.9.9.632.1.1.3 · 1 row entry · 2 columns
Open in standard view 
This table lists the information of SME interfaces on all
devices, local or remote, which are members of SME clusters
configured on a device.
cSmeClusterMemberIfEntry entry .1.3.6.1.4.1.9.9.632.1.1.3.1
A conceptual row in the cSmeClusterMemberIfTable.
Each row represents a participating interface on
local/remote device member within the specified
SME cluster.
Indexes
cSmeClusterId cSmeMemberInetAddrType cSmeMemberInetAddr cSmeClusterInterfaceIndex
Column Syntax OID
cSmeClusterInterfaceIndex
A unique Interface index for a SME interface on a device
in this cluster. This is the same as ifIndex of the
ifTable of RFC1213.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.632.1.1.3.1.1
cSmeClusterInterfaceState
The operational state of this SME interface.
CiscoSmeInterfaceStatus
Textual Convention: CiscoSmeInterfaceStatus Enumeration
Type Values:
1unknown
2initializing
3offline
4online
 .1.3.6.1.4.1.9.9.632.1.1.3.1.2

cSmeInterfaceTable

table
.1.3.6.1.4.1.9.9.632.1.1.4 · 1 row entry · 5 columns
Open in standard view 
This table lists all SME interfaces on the local device and
its corresponding information.
cSmeInterfaceEntry entry .1.3.6.1.4.1.9.9.632.1.1.4.1
A conceptual row in the cSmeInterfaceTable.
Each row represents a particular SME interface on
a local device.
Indexes
cSmeInterfaceIndex
Column Syntax OID
cSmeInterfaceIndex
A unique Interface index for a SME interface on this device.
This is the same as ifIndex of the ifTable of RFC1213.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.632.1.1.4.1.1
cSmeInterfaceState
Operational state of this SME interface.
CiscoSmeInterfaceStatus
Textual Convention: CiscoSmeInterfaceStatus Enumeration
Type Values:
1unknown
2initializing
3offline
4online
 .1.3.6.1.4.1.9.9.632.1.1.4.1.2
cSmeInterfaceClusterId
Identifies the cluster to which this SME interface belongs.
CiscoSmeClusterIndexr/w
Textual Convention: CiscoSmeClusterIndex OctetString
Type Constraints:
range: 32
 .1.3.6.1.4.1.9.9.632.1.1.4.1.3
cSmeInterfaceStorageType
This object specifies the storage type for this conceptual
row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.632.1.1.4.1.4
cSmeInterfaceRowStatus
The status of this conceptual row.

There is no restriction on the value of other columns
before a newly created row can be made active.
For example, cSmeInterfaceClusterId column can be set
independently …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.632.1.1.4.1.5

cSmeHostPortTable

table
.1.3.6.1.4.1.9.9.632.1.1.5 · 1 row entry · 4 columns
Open in standard view 
This table lists the hosts that are configured for
SME. In the case of application servers, the disks
that are accessed by the hosts may be encrypted. In the
case of backup/restore master/media servers, the tapes 
accessed by the hosts may be encrypted.
cSmeHostPortEntry entry .1.3.6.1.4.1.9.9.632.1.1.5.1
A conceptual row in the cSmeHostPortTable.
Each row represents a particular host configured for
SME service in a particular cluster.
Indexes
cSmeHostPortName
Column Syntax OID
cSmeHostPortName
Fibre-channel Port name (P_WWN) of the Host Nx_Port.
CISCO-ST-TCFcNameId
Textual Convention: CISCO-ST-TCFcNameId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.9.9.632.1.1.5.1.1
cSmeHostPortClusterId
Identifies the cluster to which this host port belongs.
CiscoSmeClusterIndexr/w
Textual Convention: CiscoSmeClusterIndex OctetString
Type Constraints:
range: 32
 .1.3.6.1.4.1.9.9.632.1.1.5.1.2
cSmeHostPortStorageType
This object specifies the storage type for this conceptual
row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.632.1.1.5.1.3
cSmeHostPortRowStatus
The status of this conceptual row.

There is no restriction on the value of other columns
before a newly created row can be made active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.632.1.1.5.1.4