CISCO-QP-LBG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
42

cqlqamPartitionTable

table
.1.3.6.1.4.1.9.9.824.1.1 · 1 row entry · 27 columns
Open in standard view 
This table describes the various parameters of QP
such as QP's state, protocol, management IP, server IP,
server state, information related to qam and video routes.
cqlqamPartitionEntry entry .1.3.6.1.4.1.9.9.824.1.1.1
Each entry corresponds to the configuration of a QP.
Indexes
cqlqpIndex
Column Syntax OID
cqlqpIndex
Table Index. This index uniquely identifies the QP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.1
cqlqpId
This object specifies the QP Id.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.2
cqlqpMgmtIpAddrType
The type of the Management address as defined inetAddressType.
The supported address types are IPv4 and IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.824.1.1.1.3
cqlqpMgmtIp
This object specifies the Management IP address of a QP.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.824.1.1.1.4
cqlqpServerIpAddrType
The type of the Server address as defined inetAddressType. The
supported address types are IPv4 and IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.824.1.1.1.5
cqlqpServerIp
Server IP of the QP.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.824.1.1.1.6
cqlqpState
This object specifies the state of the QP. The following are
the valid states.

inactive(1)
QP is in inactive state.
init(2)
QP is in init state.
active(3)
QP is in act…
Enumeration
Enumerated Values:
1inactive
2init
3active
 .1.3.6.1.4.1.9.9.824.1.1.1.7
cqlqpProtocol
This object specifies the QP Protocol.

Gqi(1)
Ermi(2)
Enumeration
Enumerated Values:
1gqi
2ermi
 .1.3.6.1.4.1.9.9.824.1.1.1.8
cqlqpKeepAliveTime
This object specifies the keepalive timer in
seconds for a QP.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.9
cqlqpServerState
This object specifies the Server state of the QP.

disconnected(1)
Server is in disconnected state.
connected(2)
Server is in connected state.
Enumeration
Enumerated Values:
1disconnected
2connected
 .1.3.6.1.4.1.9.9.824.1.1.1.10
cqlqpGqiMacAddr
This object specifies the MAC address of a QP, applicable only
for GQI Protocol.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.824.1.1.1.11
cqlqpGqiResetInterval
This object specifies Reset interval for a QP. It is applicable
only for GQI protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.12
cqlqpNumQams
The total number of qams associated with the QP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.13
cqlqpQamCarrrierList
This object specifies the list of Qam carriers associated with
the QP.
OctetString .1.3.6.1.4.1.9.9.824.1.1.1.14
cqlqpNumRoutes
The total number of routes associated with the QP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.15
cqlqpRouteDetails
Route details of the QP. It includes the configured IP and also
the highest and lowest UDP range.
OctetString .1.3.6.1.4.1.9.9.824.1.1.1.16
cqlqpErmiErrpComponentName
Component Name for the QP, applicable only for ERMI protocol.
OctetString .1.3.6.1.4.1.9.9.824.1.1.1.17
cqlqpErmiErrpStreamingZone
Streaming zone for the QP, applicable only for ERMI protocol.
OctetString .1.3.6.1.4.1.9.9.824.1.1.1.18
cqlqpErmiErrpHoldTime
Hold Time in seconds for the QP, applicable only for ERMI
protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.19
cqlqpErmiErrpConnnectTime
Connect Time in seconds for the QP, applicable only for ERMI
protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.20
cqlqpErmiErrpConnectRetry
Connection retry in seconds for the QP. It is applicable only
for ERMI protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.21
cqlqpErmiRtspConnectTime
Connect time in seconds for the QP. It is applicable only for
ERMI protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.22
cqlqpErmiRtspConnectRetry
Connect retry in seconds for the QP, applicable
only for ERMI protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.23
cqlqpErmiRtspKeepAliveTime
Connection timeout in seconds for the QP. It is applicable only
for ERMI protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.24
cqlqpErmiRtspSessionTimeout
Session Timeout in seconds for the QP. It is applicable
only for ERMI protocol.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.1.1.25
cqlqpQamOversubscribedStatus
This object specifies oversubscription status of a Qam.
The value 'True' indicates the Qam is oversubscribed.
Otherwise the value 'False' is reported.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.824.1.1.1.26
cqlqpServerIpList
List of Server IP's for the QP.
OctetString .1.3.6.1.4.1.9.9.824.1.1.1.27

cqlloadBalanceGroupTable

table
.1.3.6.1.4.1.9.9.824.1.2 · 1 row entry · 5 columns
Open in standard view 
This table describes the total bandwidth and the
reserved bandwidth of QAM/IP based sessions.
cqlloadBalanceGroupEntry entry .1.3.6.1.4.1.9.9.824.1.2.1
Each entry corresponds to the parameters of a LBG.
Indexes
ENTITY-MIBentPhysicalIndex cqllbgIndex
Column Syntax OID
cqllbgIndex
This index is to identify the LBG group within the slot.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.2.1.1
cqllbgTotalBandwidth
This object specifies the total bandwidth in Kbps of a LBG.
KbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.2.1.2
cqllbgQamRsvBandwidth
This object specifies the total reserved bandwidth in Kbps for
depi sessions.
KbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.2.1.3
cqllbgIpRsvBandwidth
This object specifies the total reserved bandwidth
in Kbps for video sessions.
KbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.2.1.4
cqllbgAvailableBandwidth
This object specifies the available bandwidth in Kbps. This may
be calculated as (TotalBandwidth - (QamRsvBandwidth +
IpRsvBandwith)).
KbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.2.1.5

cqllbgrouteTable

table
.1.3.6.1.4.1.9.9.824.1.3 · 1 row entry · 10 columns
Open in standard view 
This table describes the route parameters such as
QP id,destination ip, low and high udp range, reserved and
allocated bandwidth.
cqllbgrouteEntry entry .1.3.6.1.4.1.9.9.824.1.3.1
Each entry corresponds to the parameters of a route.
Indexes
ENTITY-MIBentPhysicalIndex cqllbgRouteIndex
Column Syntax OID
cqllbgRouteIndex
The table index. This is the index which uniquely identifies
the
route within the LBG group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.1
cqllbgQpId
This object specifies the QP ID. The range of the QP is between
1 and 50.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.2
cqllbgDstIpAddrType
The type of the destination address as defined inetAddressType.
The supported address types are IPv4 and IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.824.1.3.1.3
cqllbgDstIpAddr
Destination IP address of the route to which the incoming
packets are routed to.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.824.1.3.1.4
cqllbgUdpPortRangeMin
The lowest UDP port of the UDP port range that can be used.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.5
cqllbgUdpPortRangeMax
The highest UDP port of the UDP port range that can be used.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.6
cqllbgGqiIngressPort
Ingress port of a QP, applicable only for GQI protocol.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.7
cqllbgRsvBandwidth
Reserved bandwidth is the total bitrate reserved on
this route in Kbps.
KbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.8
cqllbgAllocatedBandwidth
The total bandwidth being used by sessions using this route in
Kbps.
KbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.9
cqllbgNumFlows
Number of sessions currently use this route to forward this
traffic in Kbps.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.824.1.3.1.10