cqlqpServerIpAddrType
CISCO-QP-LBG-MIB ·
.1.3.6.1.4.1.9.9.824.1.1.1.5
Object
column
INET-ADDRESS-MIBInetAddressType
The type of the Server address as defined inetAddressType. The supported address types are IPv4 and IPv6.
Context
- MIB
- CISCO-QP-LBG-MIB
- OID
.1.3.6.1.4.1.9.9.824.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cqlqamPartitionEntry
- Table
- cqlqamPartitionTable
- Siblings
- 26
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cqlqpIndex Table Index. This index uniquely identifies the QP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.1 |
| cqlqpServerState This object specifies the Server state of the QP.
disconnected(1)
Server is in disconnected state.
connected(2)
Server is in connected … | column | Enumeration | .1.3.6.1.4.1.9.9.824.1.1.1.10 |
| cqlqpGqiMacAddr This object specifies the MAC address of a QP, applicable only
for GQI Protocol. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.824.1.1.1.11 |
| cqlqpGqiResetInterval This object specifies Reset interval for a QP. It is applicable
only for GQI protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.12 |
| cqlqpNumQams The total number of qams associated with the QP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.13 |
| cqlqpQamCarrrierList This object specifies the list of Qam carriers associated with
the QP. | column | OctetString | .1.3.6.1.4.1.9.9.824.1.1.1.14 |
| cqlqpNumRoutes The total number of routes associated with the QP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.15 |
| cqlqpRouteDetails Route details of the QP. It includes the configured IP and also
the highest and lowest UDP range. | column | OctetString | .1.3.6.1.4.1.9.9.824.1.1.1.16 |
| cqlqpErmiErrpComponentName Component Name for the QP, applicable only for ERMI protocol. | column | OctetString | .1.3.6.1.4.1.9.9.824.1.1.1.17 |
| cqlqpErmiErrpStreamingZone Streaming zone for the QP, applicable only for ERMI protocol. | column | OctetString | .1.3.6.1.4.1.9.9.824.1.1.1.18 |
| cqlqpErmiErrpHoldTime Hold Time in seconds for the QP, applicable only for ERMI
protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.19 |
| cqlqpId This object specifies the QP Id. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.2 |
| cqlqpErmiErrpConnnectTime Connect Time in seconds for the QP, applicable only for ERMI
protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.20 |
| cqlqpErmiErrpConnectRetry Connection retry in seconds for the QP. It is applicable only
for ERMI protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.21 |
| cqlqpErmiRtspConnectTime Connect time in seconds for the QP. It is applicable only for
ERMI protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.22 |
| cqlqpErmiRtspConnectRetry Connect retry in seconds for the QP, applicable
only for ERMI protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.23 |
| cqlqpErmiRtspKeepAliveTime Connection timeout in seconds for the QP. It is applicable only
for ERMI protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.24 |
| cqlqpErmiRtspSessionTimeout Session Timeout in seconds for the QP. It is applicable
only for ERMI protocol. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.25 |
| cqlqpQamOversubscribedStatus This object specifies oversubscription status of a Qam.
The value 'True' indicates the Qam is oversubscribed.
Otherwise the value 'False' is reported. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.824.1.1.1.26 |
| cqlqpServerIpList List of Server IP's for the QP. | column | OctetString | .1.3.6.1.4.1.9.9.824.1.1.1.27 |
| cqlqpMgmtIpAddrType The type of the Management address as defined inetAddressType.
The supported address types are IPv4 and IPv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.824.1.1.1.3 |
| cqlqpMgmtIp This object specifies the Management IP address of a QP. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.824.1.1.1.4 |
| cqlqpServerIp Server IP of the QP. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.824.1.1.1.6 |
| cqlqpState This object specifies the state of the QP. The following are
the valid states.
inactive(1)
QP is in inactive state.
init(2)
QP is in init s… | column | Enumeration | .1.3.6.1.4.1.9.9.824.1.1.1.7 |
| cqlqpProtocol This object specifies the QP Protocol.
Gqi(1)
Ermi(2) | column | Enumeration | .1.3.6.1.4.1.9.9.824.1.1.1.8 |
| cqlqpKeepAliveTime This object specifies the keepalive timer in
seconds for a QP. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.824.1.1.1.9 |