CISCO-HSRP-MIB Table View

This object along with the ifIndex of a particular interface
uniquely identifies an HSRP group.

Group numbers 0,1 and 2 are the only valid group numbers
for TokenRing interfaces. For other media types, nu…

This is an unencrypted authentication string which is
carried in all HSRP messages. An authentication string
mismatch prevents a router interface from learning the
designated IP address or HSRP timer values from
other H…

The cHsrpGrpPriority helps to select the active and the
standby routers. The router with the highest priority is
selected as the active router. In the priority range of 0
to 255, 0 is the lowest priority and 255 is the …

This object, if TRUE, indicates that the current router
should attempt to overthrow a lower priority active router
and attempt to become the active router. If this object is
FALSE, the router will become the active rout…

This delay is the time difference between a router power
up and the time it can actually start preempting the
currently active router.

When a router first comes up, it doesn't have a complete
routing tabl…

HSRP routers learn a group's Hellotime or Holdtime from
hello messages.

The Hellotime is used to determine the frequency of
generating hello messages when this router becomes the
active or standby router.…

If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHelloTime is used when this router is an
active router. Otherwise, the Hellotime learned from the
current active router is used. All routers on a particular
LAN …

If cHsrpGrpUseConfiguredTimers is true,
cHsrpGrpConfiguredHoldTime is used when this router is an
active router. Otherwise, the Holdtime learned from the
current active router is used. All routers on a particular
LAN se…

If the Hellotime is not configured on a router, it can be
learned from the Hello messages from active router,
provided the Hello message is authenticated. If the
Hellotime is not learned from a Hello message from the
ac…

If the Holdtime is not configured on a router, it can be
learned from the Hello message from the active router.
Holdtime should be learned only if the Hello message is
authenticated. If the Holdtime is not learned and i…

This is the primary virtual IP address used by this
group. If this address is configured (i.e a non zero ip
address), this value is used. Otherwise, the agent will
attempt to discover the virtual address through a disc…

If this object is TRUE, cHsrpGrpVirtualIpAddr was a
configured one. Otherwise, it indicates that
cHsrpGrpVirtualIpAddr was a learned one.

Ip Address of the currently active router for this group.

Ip Address of the currently standby router for this
group.

The current HSRP state of this group on this interface.

Mac Addresses used are as specified in RFC 2281. For
ethernet and fddi interfaces, a MAC address will be in the
range 00:00:0c:07:ac:00 through 00:00:0c:07:ac:ff. The last
octet is the hexadecimal equivalent of cHsrpGrp…

The control that allows modification, creation, and
deletion of entries. For detailed rules see the
DESCRIPTION for cHsrpGrpEntry.

This object specifies the disable HSRP IPv4 virtual
IP address.