CISCO-FRAME-RELAY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
109

cfrLmiTable

table
.1.3.6.1.4.1.9.9.49.1.1.1 · 1 row entry · 13 columns
Open in standard view 
Table of Frame Relay LMI information that are
either supplemental to the frDlcmiTable of RFC 1315
or specific to Cisco's implementation.
cfrLmiEntry entry .1.3.6.1.4.1.9.9.49.1.1.1.1
Each entry of the table contains information
of Frame Relay LMI over one physical interface.
They are mostly FR generic and some Cisco specific.
Indexes
No indexes recorded
Column Syntax OID
cfrLmiLinkstatus
Data link status via LMI.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.9.9.49.1.1.1.1.1
cfrLmiLinkType
Frame Relay link type.
Enumeration
Enumerated Values:
1dte
2dce
3nni
 .1.3.6.1.4.1.9.9.49.1.1.1.1.2
cfrLmiEnquiryIns
Number of Status Enquiry messages received.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.3
cfrLmiEnquiryOuts
Number of Status Enquiry messages sent.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.4
cfrLmiStatusIns
Number of Status messages received.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.5
cfrLmiStatusOuts
Number of Status messages sent.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.6
cfrLmiUpdateStatusIns
Number of Update Status messages received.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.7
cfrLmiUpdateStatusOuts
Number of Update Status messages sent
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.8
cfrLmiStatusTimeouts
Number of times when timeout occurred on waiting
for Status message
timesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.9
cfrLmiStatusEnqTimeouts
Number of times when timeout occurred on waiting
for Status Enquiry message
timesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.1.1.1.10
cfrLmiN392Dce
LMI error threshold for DCE interface.
For DTE, value becomes 0.
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.49.1.1.1.1.11
cfrLmiN393Dce
LMI monitored event count for DCE interface.
For DTE, value becomes zero (0).
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.49.1.1.1.1.12
cfrLmiT392Dce
DCE polling verification timer for DCE interface
For DTE, the value becomes zero (0).
secondsInteger32
Constraints:
range: 0-30
 .1.3.6.1.4.1.9.9.49.1.1.1.1.13

cfrCircuitTable

table
.1.3.6.1.4.1.9.9.49.1.2.1 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive and statistics information
that are generic to Frame Relay virtual circuits.
cfrCircuitEntry entry .1.3.6.1.4.1.9.9.49.1.2.1.1
Each entry of the table contains information of a
circuit that are not included in frCircuitTable of
RFC1315 but are generic to Frame Relay.
Indexes
No indexes recorded
Column Syntax OID
cfrCircuitDEins
Number of packets received with the Discarded
Eligibility indictor (the DE bit) set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.1.1.1
cfrCircuitDEouts
Number of packets transmitted with DE bit set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.1.1.2
cfrCircuitDropPktsOuts
Number of discarded packets that were to be sent.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.1.1.3
cfrCircuitType
Basic circuit type
Enumeration
Enumerated Values:
1pvc
2svc
 .1.3.6.1.4.1.9.9.49.1.2.1.1.4

cfrExtCircuitTable

table
.1.3.6.1.4.1.9.9.49.1.2.2 · 1 row entry · 30 columns
Open in standard view 
Table of Cisco implementation specific FR
circuit information. This is a Cisco extension
for the frCircuitTable of RFC 1315.
cfrExtCircuitEntry entry .1.3.6.1.4.1.9.9.49.1.2.2.1
Each entry of the table contains information
of a Frame Relay virtual circuit that are specific
to Cisco implementation.
Indexes
No indexes recorded
Column Syntax OID
cfrExtCircuitIfName
The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all console displays,
such as 'serial 0', 'serial…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.2.2.1.1
cfrExtCircuitIfType
Type of the subinterface this DLCI is associated
with, if configured.
Enumeration
Enumerated Values:
1mainInterface
2pointToPoint
3multipoint
 .1.3.6.1.4.1.9.9.49.1.2.2.1.2
cfrExtCircuitSubifIndex
For value greater than zero (0), it indicates
the network management interface index
for the subinterface associated with
this DLCI. Value 0 means the DLCI is not
associated with any subinterface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.49.1.2.2.1.3
cfrExtCircuitMapStatus
The mapping protocols (internally considered as
the 'link type') applied on this circuit.
The value ranges from 0 to 2047.
For point-to-point DLCI, the value stays zero.
Otherwise, the value is a sum. It initially takes…
Integer32
Constraints:
range: 0-2047
 .1.3.6.1.4.1.9.9.49.1.2.2.1.4
cfrExtCircuitCreateType
Identify the last source of the circuit's creation.
Enumeration
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.9.9.49.1.2.2.1.5
cfrExtCircuitMulticast
Indicate if this DLCI is a multicast DLCI.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.49.1.2.2.1.6
cfrExtCircuitRoutedDlci
The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI.
DlciNumber
Textual Convention: DlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.9.9.49.1.2.2.1.7
cfrExtCircuitRoutedIf
The interface for the routed DLCI that pairs up
with this DLCI for switching. Value greater than 0
is the InterfaceIndex for that interface. Value
zero (0) indicates that there is no such routed DLCI
corresponding to th…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.49.1.2.2.1.8
cfrExtCircuitUncompressIns
Number of inbound octets of the data packets,
accounted at Frame Relay level after FRF.9
payload decompression is applied. In the case of
non-FRF.9, this value could be identical to
frCircuitReceivedOctets, unless other…
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.9
cfrExtCircuitUncompressOuts
Number of outbound octets of the data packets,
accounted at Frame Relay level before FRF.9
payload compression is applied. In the case of
non-FRF.9, this value could be identical to
frCircuitSentOctets, unless otherwise…
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.10
cfrExtCircuitFECNOuts
Total number of frames sent out to the network
indicating forward congestion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.11
cfrExtCircuitBECNOuts
Total number of frames sent out to the network
indicating backward congestion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.12
cfrExtCircuitMinThruputOut
Circuit's outgoing minimal Throughput based on
configuration.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.9.9.49.1.2.2.1.13
cfrExtCircuitMinThruputIn
Circuit's incoming minimal Throughput based on
configuration.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.9.9.49.1.2.2.1.14
cfrExtCircuitBcastPktOuts
Total number of broadcast packets sent out to the
network.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.15
cfrExtCircuitBcastByteOuts
Total number of bytes sent out to the network in
broadcast packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.16
cfrExtCircuitBandwidth
Bandwidth of the virtual circuit, acquired from
Cisco typed LMI Full Status message.
bits per secondInteger32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.9.9.49.1.2.2.1.17
cfrExtCircuitShapeByteLimit
Maximum number of tokens a token bucket can hold in any
time interval in case of traffic shaping.
octetsInteger32
Constraints:
range: 125-2147483647
 .1.3.6.1.4.1.9.9.49.1.2.2.1.18
cfrExtCircuitShapeInterval
Committed rate measurement interval.
millisecondsInteger32
Constraints:
range: 10-125
 .1.3.6.1.4.1.9.9.49.1.2.2.1.19
cfrExtCircuitShapeByteIncrement
Number of tokens added into the token bucket per time
interval in case of traffic shaping.
octetsInteger32
Constraints:
range: 125-2147483647
 .1.3.6.1.4.1.9.9.49.1.2.2.1.20
cfrExtCircuitShapePkts
Total number of packets that went through traffic
shaping.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.21
cfrExtCircuitShapeBytes
Total number of bytes that went through traffic
shaping.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.22
cfrExtCircuitShapePktsDelay
Total number of packets that were delayed by the
traffic shaper.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.23
cfrExtCircuitShapeBytesDelay
Total number of bytes that were delayed by the
traffic shaper.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.2.2.1.24
cfrExtCircuitShapeActive
Shows whether shaping is active or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.49.1.2.2.1.25
cfrExtCircuitShapeAdapting
Type of Adaptive Shaping configured.
none(1) - No adaptive shaping configured
becn(2) - Backward Explicit Congestion Notification
foreSight(3) - ForeSight is the network traffic control
softwar…
Enumeration
Enumerated Values:
1none
2becn
3foreSight
 .1.3.6.1.4.1.9.9.49.1.2.2.1.26
cfrExtCircuitTxDataRate
The average rate (bytes/second) at which data is
transmitted in this circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.9.9.49.1.2.2.1.27
cfrExtCircuitTxPktRate
The average number of packets sent in a second in this
circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.9.9.49.1.2.2.1.28
cfrExtCircuitRcvDataRate
The average rate (bytes/second) at which data is
received in this circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.9.9.49.1.2.2.1.29
cfrExtCircuitRcvPktRate
The average number of packets received in a second in
this circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.9.9.49.1.2.2.1.30

cfrMapTable

table
.1.3.6.1.4.1.9.9.49.1.3.1 · 1 row entry · 10 columns
Open in standard view 
Table of protocols and addresses mapping
information of FR virtual circuit.
cfrMapEntry entry .1.3.6.1.4.1.9.9.49.1.3.1.1
Each entry of the table contains one mapping
information of a Frame Relay virtual circuit.
Indexes
RFC1315-MIBfrCircuitIfIndex RFC1315-MIBfrCircuitDlci cfrMapIndex
Column Syntax OID
cfrMapIndex
An arbitrary Index to the mapping information
associated with a certain circuit. The maximum
value is arbitrarily picked which is considered
sufficient for usual configuration.
Integer32
Constraints:
range: 1-999
 .1.3.6.1.4.1.9.9.49.1.3.1.1.1
cfrMapProtocol
Mapping protocol for this circuit.
CfrMapProtocols
Textual Convention: CfrMapProtocols Enumeration
Type Values:
1arp
6serialArp
7ip
10xns
11novell
12apollo
13vines
16appletalk
18ieeeSpanning
22decnet
25clns
37rsrb
38bridge
39stun
40frArp
47uncompressedTcp
48compressedTcp
49llc2
53frSwitch
63dlsw
74nhrp
83compressedRtp
999wildcard
 .1.3.6.1.4.1.9.9.49.1.3.1.1.2
cfrMapAddress
Mapping protocol address at remote end for
this DLCI.
NOTE: For point-to-point DLCI, the string is fixed
to be point-to-point.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.49.1.3.1.1.3
cfrMapType
Type for the map creation.
Enumeration
Enumerated Values:
1static
2dynamic
3svc
 .1.3.6.1.4.1.9.9.49.1.3.1.1.4
cfrMapEncaps
Indication of the encapsulation type for this
mapping protocol.
Enumeration
Enumerated Values:
1ietf
2cisco
 .1.3.6.1.4.1.9.9.49.1.3.1.1.5
cfrMapBroadcast
Broadcast enabled or disabled.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.49.1.3.1.1.6
cfrMapPayloadCompress deprecated
Indicate if payload compression is enabled.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.49.1.3.1.1.7
cfrMapTcpHdrCompress
TCP header compression type, if applicable.
Enumeration
Enumerated Values:
1inapplicable
2passive
3active
 .1.3.6.1.4.1.9.9.49.1.3.1.1.8
cfrMapRtpHdrCompress
RTP header compression type, if applicable.
The value 'passive' means that the header of an
outgoing RTP/IP packet is compressed only if an
incoming RTP/IP packet had a compressed header.
The value 'active' means the he…
Enumeration
Enumerated Values:
1inapplicable
2passive
3active
 .1.3.6.1.4.1.9.9.49.1.3.1.1.9
cfrMapPayloadCompressType
FR payload compression type, if applicable.
FRF.9 is the Frame Relay Forum Implementation Agreement
on FR payload compression. The compression can be done
by either software or hardware (when equipped with the
supportin…
Enumeration
Enumerated Values:
1inapplicable
2cisco
3frf9Software
4frf9Hardware
 .1.3.6.1.4.1.9.9.49.1.3.1.1.10

cfrSvcTable

table
.1.3.6.1.4.1.9.9.49.1.4.1 · 1 row entry · 8 columns
Open in standard view 
Table of FR SVC specific, descriptive
and statistics information.
cfrSvcEntry entry .1.3.6.1.4.1.9.9.49.1.4.1.1
Each entry of the table contains circuit information
specific to a Frame Relay Switched Virtual Circuit.
Indexes
RFC1315-MIBfrCircuitIfIndex RFC1315-MIBfrCircuitDlci
Column Syntax OID
cfrSvcAddrLocal
Local E.164/X.125 address for the circuit.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.49.1.4.1.1.1
cfrSvcAddrRemote
Remote E.164/X.125 address for the circuit.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.49.1.4.1.1.2
cfrSvcThroughputIn
Circuit's incoming throughput. For outgoing
throughput (commonly referred to as CIR) see
frCircuitThroughput per RFC1315.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.9.9.49.1.4.1.1.3
cfrSvcMinThruputOut deprecated
Circuit's outgoing minimal Throughput.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.9.9.49.1.4.1.1.4
cfrSvcMinThruputIn deprecated
Circuit's incoming minimal Throughput.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.9.9.49.1.4.1.1.5
cfrSvcCommitBurstIn
Circuit's incoming Committed Burst Rate.
See ANSI and/or ITU specifications for
definition and calculations. For outgoing
CBR, see frCircuitCommittedBurst per RFC 1315.
Integer32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.9.9.49.1.4.1.1.6
cfrSvcExcessBurstIn
Circuit's incoming Excess Burst Rate.
See ANSI and/or ITU specifications for
definition and calculations. For outgoing
EBR, see frCircuitExcessBurst per RFC 1315.
Integer32
Constraints:
range: 9600-2440000
 .1.3.6.1.4.1.9.9.49.1.4.1.1.7
cfrSvcIdleTime
Circuit's idle time period. If expires, the
circuit is cleared.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.49.1.4.1.1.8

cfrElmiTable

table
.1.3.6.1.4.1.9.9.49.1.5.2 · 1 row entry · 3 columns
Open in standard view 
Table of CISCO Frame Relay ELMI information that is
specific to CISCO implementation
cfrElmiEntry entry .1.3.6.1.4.1.9.9.49.1.5.2.1
Each entry of the table contains information about a
physical interface. The table can be accessible only
if the device supports ELMI protocol and if LMI is
enabled on the interface.
Indexes
Column Syntax OID
cfrElmiLinkStatus
This variable states whether Enhanced Link Management
Interface(ELMI) protocol is enabled or not on a
frame relay interface.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.9.49.1.5.2.1.1
cfrElmiArStatus
This variable states whether the Enhanced Link
Management Interface(ELMI) address registration(AR)
mechanism is enabled or not on a frame relay
interface. A value of 1 indicates ELMI AR is
supported on the interface. …
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.9.49.1.5.2.1.2
cfrElmiRemoteStatus
This variable states the Enhanced Link
Management(ELMI) status on the other end of the
interface. If cfrElmiLinkStatus is enabled on the
other end a value of 1 will be returned,
else 2 will be returned. This object doe…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.9.49.1.5.2.1.3

cfrElmiNeighborTable

table
.1.3.6.1.4.1.9.9.49.1.5.3 · 1 row entry · 6 columns
Open in standard view 
Table of CISCO Frame Relay Neighbor ELMI information
that is specific to CISCO implementation.
cfrElmiNeighborEntry entry .1.3.6.1.4.1.9.9.49.1.5.3.1
Each entry of the table contains information of the
neighboring device connected to a physical interface.
The entry will be present only if ELMI is enabled on
the neighboring device interface. If the value of the
cfrElm…
Indexes
Column Syntax OID
cfrElmiNeighborArStatus
This variable indicates the status of ELMI Address
registration(AR) on the neighboring device. A value
of 1 indicates ELMI AR is not supported on the
neighboring device. A value of 2 indicates ELMI AR is
enabled on t…
Enumeration
Enumerated Values:
1notsupported
2enabled
3disabled
 .1.3.6.1.4.1.9.9.49.1.5.3.1.1
cfrElmiNeighborIpAddress
The Management IP address of the neighboring device
to which the other end of this interface is
connected. Network management system can use this
address to send management messages to the device.
If address registrat…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.49.1.5.3.1.2
cfrElmiNeighborIfIndex
The Interface index of the neighboring device to
which this interface is connected. If the value of
cfrElmiNeighborArStatus is 2 then this will have a
valid value. If the value of cfrElmiNeighborArStatus
is 3 or 1 then…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.49.1.5.3.1.3
cfrElmiNeighborVendorName
Vendor name of the neighboring device to which the
other end of this interface is connected.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.5.3.1.4
cfrElmiNeighborPlatformName
Platform name of the neighboring device to which the
other end of this interface is connected.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.5.3.1.5
cfrElmiNeighborDeviceName
Device name of the neighboring device to which the
other end of this interface is connected.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.5.3.1.6

cfrFragTable

table
.1.3.6.1.4.1.9.9.49.1.6.1 · 1 row entry · 21 columns
Open in standard view 
Table of Frame Relay Fragmentation information. 
These are specific to Cisco's implementation.
cfrFragEntry entry .1.3.6.1.4.1.9.9.49.1.6.1.1
Each entry of the table contains details of
fragmentation configured on this circuit.
Indexes
RFC1315-MIBfrCircuitIfIndex RFC1315-MIBfrCircuitDlci
Column Syntax OID
cfrFragSize
cfrFragSize defines the payload size of a fragment
and it excludes the FR headers and any FR fragmentation
header.
octetsInteger32
Constraints:
range: 16-1600
 .1.3.6.1.4.1.9.9.49.1.6.1.1.1
cfrFragType
Fragmentation type configured by the user. The types
supported are end-to-end, VoFR-cisco and VoFR.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.6.1.1.2
cfrFragInPkts
Total number of frames received that have a
fragmentation header.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.3
cfrFragOutPkts
Total number of fragments that are transmitted with a
fragmenation header.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.4
cfrFragInOctets
Total number of bytes received in frames that have a
fragmentation header. The number of bytes include the
FR header.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.5
cfrFragOutOctets
Total number of bytes that are transmitted in frames
with a fragmenation header. The number of bytes also
includes the FR header.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.6
cfrFragNotInPkts
Total number of frames received that do not require
reassembly and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation type is set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.7
cfrFragNotOutPkts
Total number of frames transmitted without fragmenting
and therefore will not contain the fragmentation header.
This counter is valid only when end-to-end fragmentation
type is set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.8
cfrFragNotInOctets
Total number of bytes received in frames that do not
require reassembly and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation type is set.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.9
cfrFragNotOutOctets
Total number of bytes transmitted in frames that are
not fragmented and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation type is set.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.10
cfrFragAssembledInPkts
Total number of fully reassembled frames. It also
counts the number of packets received without FR
fragmentation header (i.e. in un-fragmentated pkts).
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.11
cfrFragAssembledInOctets
Total number of bytes received in fully reassembled
frames. It also counts the number of packets received
without FR fragmentation header (i.e.in un-fragmentated
pkts).
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.12
cfrFragPreOutPkts
Total number of frames fragmented and trasmitted. It
also counts the number of packets trasmitted without FR
fragmentation header (i.e. in un-fragmentated pkts).
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.13
cfrFragPreOutOctets
Total number of bytes transmitted in fragmented frames.
It also counts the number of bytes trasmitted in frames
without FR fragmentation header (i.e. in un-fragmentated
pkts).
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.14
cfrFragDroppedReAssembledInPkts
Number of received fragments dropped for reasons such
as : running out of memory, receiving segments out of
sequence, receiving an unexpected frame with a B bit
set, timing out on a reassembling frame.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.15
cfrFragDroppedFragmentedOutPkts
Number of fragments dropped because of running
out of memory.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.16
cfrFragTimeoutsIn
Number of reassemble timer timeouts for this circuit.
A frame requiring more than two minutes to fully
reassemble is dropped and timeout will be incremented
by one.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.49.1.6.1.1.17
cfrFragOutOfSeqFragPkts
Indicates the total number of packets received with an
unexpected sequence number. All fragments being
reassembled are dropped. Start a new packet with the
received segment only if the B bit is set on the
segment. Oth…
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.18
cfrFragUnexpectedBBitSetPkts
Number of fragments received in this circuit with
a B bit set. All fragments being reassembled are dropped
and a new packet is started with this segment.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.19
cfrFragSeqMissedPkts
Number of fragments received in this circuit with
skipped sequence number.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.20
cfrFragInterleavedOutPkts
Number of packets that have been interleaved between
segments.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.49.1.6.1.1.21

cfrConnectionTable

table
.1.3.6.1.4.1.9.9.49.1.7.1 · 1 row entry · 14 columns
Open in standard view 
Table of Frame Relay/Frame Relay and Frame Relay/ATM
Network/Service Interworking connection information. 
These are specific to Cisco's implementation.
cfrConnectionEntry entry .1.3.6.1.4.1.9.9.49.1.7.1.1
Each entry of the table contains information of a
connection that is established for Frame Relay/Frame
Relay and Frame Relay/ATM Network/Service Interworking.
Indexes
RFC1315-MIBfrCircuitIfIndex RFC1315-MIBfrCircuitDlci
Column Syntax OID
cfrConnName
The textual name of a for FR/FR or FR/ATM
Network/Service Interworking connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.7.1.1.1
cfrConnID
The numerical identifier of a FR/FR or FR/ATM
Network/Service Interworking connection.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.9.9.49.1.7.1.1.2
cfrConnState
Status of a FR/FR or FR/ATM Network/Service
Interworking connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.7.1.1.3
cfrConnSegment1Name
The textual name used to identify the first segment of
a FR/FR or FR/ATM Network/Service Interworking
connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.7.1.1.4
cfrConnSegment1VCGroup
The textual name used to identify the VC-Group in the
first segment of a Frame Relay/ATM Network Interworking
(FRF.5)connection.
This field is not applicabe in case of,
FRF.8 (Frame Relay/ATM Service Interwo…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.7.1.1.5
cfrConnSegment1Dlci
The DLCI used as the first segment of a FR-FR or FR-ATM
Network/Service Interworking connection.
DlciNumber
Textual Convention: DlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.9.9.49.1.7.1.1.6
cfrConnSegment2Name
The interface on which second segment of a FR-FR or
FR-ATM Network/Service Interworking connection is
configured.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.49.1.7.1.1.7
cfrConnSegment2Vpi
The value of VPI, in the ATM connection, used as the
second segment of a FR-ATM Network/Service Interworking
connection. In case of FR-FR connection, the same will
be used to display the DLCI used as the second segme…
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.49.1.7.1.1.8
cfrConnSegment2Vci
The value of VCI, in the ATM connection, used as the
second segment of a FR-ATM Network/Service Interworking
connection. In case of FR-FR connection, this is not
supported.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.49.1.7.1.1.9
cfrConnServiceTranslation
Shows whether Service Translation Mode is supported or
not. Translation Mode is the interworking of
internetworking (routed and/or bridged) protocols used
in FR-ATM Service PVC Interworking(FRF.8).
This is not suppor…
Enumeration
Enumerated Values:
1serviceTranslationEnabled
2serviceTranslationNotEnabled
 .1.3.6.1.4.1.9.9.49.1.7.1.1.10
cfrConnFrSscsDlci
The DLCI value used at the FR-SSCS layer. This is one of
connection multiplexing methods used in Frame Relay/ATM
Network Interworking.
Not supported in case of FRF.8 (FR-ATM Service PVC
Interworking) and FR-FR connec…
DlciNumber
Textual Convention: DlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.9.9.49.1.7.1.1.11
cfrConnEfciBit
Shows whether the FECN field in the FR frame is mapped
to the ATM EFCI field of every cell generated out of the
FR frame. This is used to indicate congestion in FR to
ATM direction in case of Frame Relay/ATM Service …
Enumeration
Enumerated Values:
1mapFecn
2notMapFecn
 .1.3.6.1.4.1.9.9.49.1.7.1.1.12
cfrConnDeBit
The method of operation for loss priority mapping in the
B-ISDN to FR direction..
Not supported in case of FR-FR connection.
Enumeration
Enumerated Values:
1noMapClp
2mapClp
3setDe0
4setDe1
 .1.3.6.1.4.1.9.9.49.1.7.1.1.13
cfrConnClpBit
The method of operation used to map loss priority
mapping in the FR to ATM direction.
Not supported in case of FR-FR connection.
Enumeration
Enumerated Values:
1setClpTo0AndCopyDeToFrsscsDe
2setClpTo1AndCopyDeToFrsscsDe
3copyDeToFrsscsDeAndClp
4copyDeToClp
5setClp1
6setClp0
 .1.3.6.1.4.1.9.9.49.1.7.1.1.14