cfrExtCircuitMapStatus
CISCO-FRAME-RELAY-MIB ·
.1.3.6.1.4.1.9.9.49.1.2.2.1.4
Object
column
Integer32
The mapping protocols (internally considered as
the 'link type') applied on this circuit.
The value ranges from 0 to 2047.
For point-to-point DLCI, the value stays zero.
Otherwise, the value is a sum. It initially takes
the value zero, then, for each type of Protocol,
2 raised to a power is added to the sum.
The following table presents respective power and
equivalent value for each applicable type:
Protocol Power Value
-------- ----- -----
IP 0 1
IPX 1 2
Appletalk 2 4
XNS 3 8
VINES 4 16
DECnet 5 32
CLNS 6 64
Bridging 7 128
RSRB 8 256
STUN 9 512
LLC2 10 1024
For example, value 3 means the circuit's mapping
protocols include IP and IPX. (3 = 2**1 + 2**0,
where 0 corresponds to IP and 1 to IPX.) Value 0
means there is currently no mapping protocol for
the circuit.
See cfrMapTable for more mapping information.
Context
- MIB
- CISCO-FRAME-RELAY-MIB
- OID
.1.3.6.1.4.1.9.9.49.1.2.2.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cfrExtCircuitEntry
- Table
- cfrExtCircuitTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2047
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfrExtCircuitIfName The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all conso… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.49.1.2.2.1.1 |
| cfrExtCircuitUncompressOuts Number of outbound octets of the data packets,
accounted at Frame Relay level before FRF.9
payload compression is applied. In the case of
non-FRF.9, this value could be identical … | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.10 |
| cfrExtCircuitFECNOuts Total number of frames sent out to the network
indicating forward congestion. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.11 |
| cfrExtCircuitBECNOuts Total number of frames sent out to the network
indicating backward congestion. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.12 |
| cfrExtCircuitMinThruputOut Circuit's outgoing minimal Throughput based on
configuration. | column | bits per second Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.13 |
| cfrExtCircuitMinThruputIn Circuit's incoming minimal Throughput based on
configuration. | column | bits per second Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.14 |
| cfrExtCircuitBcastPktOuts Total number of broadcast packets sent out to the
network. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.15 |
| cfrExtCircuitBcastByteOuts Total number of bytes sent out to the network in
broadcast packets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.16 |
| cfrExtCircuitBandwidth Bandwidth of the virtual circuit, acquired from
Cisco typed LMI Full Status message. | column | bits per second Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.17 |
| cfrExtCircuitShapeByteLimit Maximum number of tokens a token bucket can hold in any
time interval in case of traffic shaping. | column | octets Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.18 |
| cfrExtCircuitShapeInterval Committed rate measurement interval. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.19 |
| cfrExtCircuitIfType Type of the subinterface this DLCI is associated
with, if configured. | column | Enumeration | .1.3.6.1.4.1.9.9.49.1.2.2.1.2 |
| cfrExtCircuitShapeByteIncrement Number of tokens added into the token bucket per time
interval in case of traffic shaping. | column | octets Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.20 |
| cfrExtCircuitShapePkts Total number of packets that went through traffic
shaping. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.21 |
| cfrExtCircuitShapeBytes Total number of bytes that went through traffic
shaping. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.22 |
| cfrExtCircuitShapePktsDelay Total number of packets that were delayed by the
traffic shaper. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.23 |
| cfrExtCircuitShapeBytesDelay Total number of bytes that were delayed by the
traffic shaper. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.24 |
| cfrExtCircuitShapeActive Shows whether shaping is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.49.1.2.2.1.25 |
| cfrExtCircuitShapeAdapting Type of Adaptive Shaping configured.
none(1) - No adaptive shaping configured
becn(2) - Backward Explicit Congestion Notification
foreSight(3) - ForeSight is the network… | column | Enumeration | .1.3.6.1.4.1.9.9.49.1.2.2.1.26 |
| cfrExtCircuitTxDataRate The average rate (bytes/second) at which data is
transmitted in this circuit. | column | Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.27 |
| cfrExtCircuitTxPktRate The average number of packets sent in a second in this
circuit. | column | Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.28 |
| cfrExtCircuitRcvDataRate The average rate (bytes/second) at which data is
received in this circuit. | column | Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.29 |
| cfrExtCircuitSubifIndex For value greater than zero (0), it indicates
the network management interface index
for the subinterface associated with
this DLCI. Value 0 means the DLCI is not
associated with … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.49.1.2.2.1.3 |
| cfrExtCircuitRcvPktRate The average number of packets received in a second in
this circuit. | column | Integer32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.30 |
| cfrExtCircuitCreateType Identify the last source of the circuit's creation. | column | Enumeration | .1.3.6.1.4.1.9.9.49.1.2.2.1.5 |
| cfrExtCircuitMulticast Indicate if this DLCI is a multicast DLCI. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.49.1.2.2.1.6 |
| cfrExtCircuitRoutedDlci The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI. | column | DlciNumber | .1.3.6.1.4.1.9.9.49.1.2.2.1.7 |
| cfrExtCircuitRoutedIf The interface for the routed DLCI that pairs up
with this DLCI for switching. Value greater than 0
is the InterfaceIndex for that interface. Value
zero (0) indicates that there is… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.49.1.2.2.1.8 |
| cfrExtCircuitUncompressIns Number of inbound octets of the data packets,
accounted at Frame Relay level after FRF.9
payload decompression is applied. In the case of
non-FRF.9, this value could be identical … | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.49.1.2.2.1.9 |