CISCO-BUS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
25

busTable

table
.1.3.6.1.4.1.9.9.40.1.1 · 1 row entry · 20 columns
Open in standard view 
A (conceptual) table representing all the instantiations
of BUSs on the designated device.  This table may or may not
allow the creation of rows depending on whether the LANE
service elements allow the separate creation of LES and BUS
components.  In the event that separate components are not
allowed then the MINIMUM-ACCESS detailed in the 
MODULE-COMPLIANCE should be used by those BUS implementations
busEntry entry .1.3.6.1.4.1.9.9.40.1.1.1
An entry (conceptual row) in the busTable.
Indexes
busElanName busIndex
Column Syntax OID
busElanName
The ELAN name of the designated bridge.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.40.1.1.1.1
busIndex
A unique identifier for this particular BUS on this
ELAN. This value must remain constant while the entry
is in existence and during the operation of the agent
(i.e. It is allowed to change after reboot). For
i…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.40.1.1.1.2
busAtmAddrSpec
The specified ATM address of the BUS on the interface
of interest. Note that setting this object will have
the side effect of reinitializing the BUS and
consequently dropping all clients connected to it. If
…
LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.40.1.1.1.3
busAtmAddrMask
An address mask that when used with the
busAtmAddrSpec, specifies the portion of the BUS' ATM
address that is desired to be configured. Note that
setting this object will result in the
rei…
OctetStringr/w
Constraints:
range: 0-0
range: 20-20
 .1.3.6.1.4.1.9.9.40.1.1.1.4
busAtmAddrActl
The resultant ATM address in use by the BUS. This
object is a product of the specified ATM address, mask
and interaction with the switch via the ILMI.
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.40.1.1.1.5
busIfIndex
The interface that a BUS will forward traffic over.
The value specified for this object must equate to a
value of ifIndex in the ifTable. The interface will
be for that particular ATM port (the physical
interface, not…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.40.1.1.1.6
busSubIfNum
Specifies the sub-interface number that the BUS
will reside on. This sub-interface may be shared with
a LEC or BUS of the same ELAN but is not required to
do so. If no value is specified for this object at
ro…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.40.1.1.1.7
busUpTime
The value of sysUpTime when this BUS became
enabled.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.40.1.1.1.8
busLanType
The type of legacy LAN that this LES emulates.
Enumerationr/w
Enumerated Values:
1dot3
2dot5
 .1.3.6.1.4.1.9.9.40.1.1.1.9
busMaxFrm
The maximum frame size that the emulated LAN may
accept.
Enumerationr/w
Enumerated Values:
1516dot3
4544tr4Mb
9234rfc1626
18190tr16Mb
 .1.3.6.1.4.1.9.9.40.1.1.1.10
busMaxFrmAge
The maximum number of seconds a BUS will hold onto a
packet for forwarding until it is dropped. Dropping a
packet will result in the incrementing of the
busFrmTimeOuts counter.
secondsInteger32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.9.9.40.1.1.1.11
busOutFwdOctets
The number of octets that this BUS has forwarded
since its initialization.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.40.1.1.1.12
busOutFwdUcastFrms
The number of frames that the BUS has forwarded
which were unicast data frames including all control
frames (i.e. they were flooded from the client).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.40.1.1.1.13
busOutFwdNUcastFrms
The number of frames that the BUS has forwarded
which were multicast frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.40.1.1.1.14
busFrmTimeOuts
The number of frames dropped by the BUS due to time
out.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.40.1.1.1.15
busMultiFwdVpi
The virtual path identifier for the multicast
forward VCC.
CiscoVpiInteger
Textual Convention: CiscoVpiInteger Integer32
Type Constraints:
range: -1..255
 .1.3.6.1.4.1.9.9.40.1.1.1.16
busMultiFwdVci
The virtual channel identifier for the multicast
forward VCC.
CiscoVciInteger
Textual Convention: CiscoVciInteger Integer32
Type Constraints:
range: -1..65535
 .1.3.6.1.4.1.9.9.40.1.1.1.17
busOperStatus
This object reflects the actual state of the BUS
which may differ from that of the busAdminStatus
object. This can occur when the interface
ifOperStatus is 'down' but the corresponding
bu…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.40.1.1.1.18
busAdminStatus
The desired state of the designated BUS as
prescribed by the operator. The actions of the agent
will, if at all possible, eventually result in the
desired state being reflected in the busOperStatus.
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.40.1.1.1.19
busStatus
The status of the BUS entry. This object cannot be
set to active until the busIfIndex object has an
appropiate value. Note that implementations that
do not support separate LES/BUS entities may
r…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.40.1.1.1.20

busClientTable

table
.1.3.6.1.4.1.9.9.40.1.2 · 1 row entry · 5 columns
Open in standard view 
A (conceptual) table listing the clients associated
with a BUS.  Note that the local or network management
will not create or destroy rows in this table but
may only inspect what LECs are currently joined
with the BUS.
busClientEntry entry .1.3.6.1.4.1.9.9.40.1.2.1
An entry (conceptual) row that denotes a client that
is establishing/has established a multicast send VC to
the BUS.
Indexes
busElanName busIndex busClientId
Column Syntax OID
busClientId
A unique identifier for a LEC which is establishing/
has-established a multicast send VC to the BUS. The
identifier only persists for as long as the LEC is
associated with this particular BUS. If the LEC is
dropped an…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.40.1.2.1.1
busClientIfIndex
The interface of the uni-directional multicast send
connection between the LEC and BUS.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.40.1.2.1.2
busClientMSendVpi
The VPI of the uni-directional multicast send
connection between the LEC and BUS.
CiscoVpiInteger
Textual Convention: CiscoVpiInteger Integer32
Type Constraints:
range: -1..255
 .1.3.6.1.4.1.9.9.40.1.2.1.3
busClientMSendVci
The VCI of the uni-directional multicast send
connection between the LEC and BUS.
CiscoVciInteger
Textual Convention: CiscoVciInteger Integer32
Type Constraints:
range: -1..65535
 .1.3.6.1.4.1.9.9.40.1.2.1.4
busClientAtmAddress
The address associated with the LANE client on the
mulicast send VCC.
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Textual Convention: LAN-EMULATION-CLIENT-MIBAtmLaneAddress OctetString
Type Constraints:
range: 0
range: 20
 .1.3.6.1.4.1.9.9.40.1.2.1.5