busAtmAddrMask

CISCO-BUS-MIB · .1.3.6.1.4.1.9.9.40.1.1.1.4

MIB view Table view

Object

column r/w OctetString

An    address mask  that     when  used  with  the
busAtmAddrSpec, specifies  the portion of the BUS' ATM
address  that is desired  to be  configured. Note that
setting    this     object   will   result   in    the
reinitialization of the BUS, consequently dropping all
clients connected to  it.   At row creation  time this
object  cannot be set  without also  supplying a value
for  the busAtmAddrSpec.  If   the BUS ATM  address is
omitted at creation time then this object defaults to
the  value of all  zeros  (none of the  busAtmAddrSpec
value   is  relevant).  If the    BUS  ATM address  is
specified  at creation time   but this object omitted,
then this object  defaults  to the  value of all  ones
(all of the busAtmAddrSpec is relevant).

Context

MIB: CISCO-BUS-MIB
OID: .1.3.6.1.4.1.9.9.40.1.1.1.4
Type: column
Access: readwrite
Status: current
Parent: busEntry
Table: busTable
Siblings: 19

Syntax

OctetString

Values & Constraints

Object Constraints

range: 0-0 range: 20-20

Related Objects

Sibling Objects

Object	Type	Syntax	OID
busElanName The ELAN name of the designated bridge.	column	OctetString	`.1.3.6.1.4.1.9.9.40.1.1.1.1`
busMaxFrm The maximum frame size that the emulated LAN may accept.	column	Enumeration	`.1.3.6.1.4.1.9.9.40.1.1.1.10`
busMaxFrmAge The maximum number of seconds a BUS will hold onto a packet for forwarding until it is dropped. Dropping a packet will result in the incrementing of the busFrmTimeOuts c…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.40.1.1.1.11`
busOutFwdOctets The number of octets that this BUS has forwarded since its initialization.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.40.1.1.1.12`
busOutFwdUcastFrms The number of frames that the BUS has forwarded which were unicast data frames including all control frames (i.e. they were flooded from the client).	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.40.1.1.1.13`
busOutFwdNUcastFrms The number of frames that the BUS has forwarded which were multicast frames.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.40.1.1.1.14`
busFrmTimeOuts The number of frames dropped by the BUS due to time out.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.9.40.1.1.1.15`
busMultiFwdVpi The virtual path identifier for the multicast forward VCC.	column	CiscoVpiInteger	`.1.3.6.1.4.1.9.9.40.1.1.1.16`
busMultiFwdVci The virtual channel identifier for the multicast forward VCC.	column	CiscoVciInteger	`.1.3.6.1.4.1.9.9.40.1.1.1.17`
busOperStatus This object reflects the actual state of the BUS which may differ from that of the busAdminStatus object. This can occur when the interface ifOperStatus is …	column	Enumeration	`.1.3.6.1.4.1.9.9.40.1.1.1.18`
busAdminStatus The desired state of the designated BUS as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being…	column	Enumeration	`.1.3.6.1.4.1.9.9.40.1.1.1.19`
busIndex A unique identifier for this particular BUS on this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent (i.e. It is al…	column	Integer32	`.1.3.6.1.4.1.9.9.40.1.1.1.2`
busStatus The status of the BUS entry. This object cannot be set to active until the busIfIndex object has an appropiate value. Note that implementations that do not suppo…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.40.1.1.1.20`
busAtmAddrSpec The specified ATM address of the BUS on the interface of interest. Note that setting this object will have the side effect of reinitializing the BUS and consequently dr…	column	LAN-EMULATION-CLIENT-MIBAtmLaneAddress	`.1.3.6.1.4.1.9.9.40.1.1.1.3`
busAtmAddrActl The resultant ATM address in use by the BUS. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI.	column	LAN-EMULATION-CLIENT-MIBAtmLaneAddress	`.1.3.6.1.4.1.9.9.40.1.1.1.5`
busIfIndex The interface that a BUS will forward traffic over. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be for that particul…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.40.1.1.1.6`
busSubIfNum Specifies the sub-interface number that the BUS will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do so. If no va…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.40.1.1.1.7`
busUpTime The value of sysUpTime when this BUS became enabled.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.40.1.1.1.8`
busLanType The type of legacy LAN that this LES emulates.	column	Enumeration	`.1.3.6.1.4.1.9.9.40.1.1.1.9`