CISCO-ATM-PVC-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
capvcTable
table.1.3.6.1.4.1.9.9.94.1.1.1
·
1 row entry
·
10 columns
A table of all the PVCs configured on an ATM uplink card.
An entry in the PVC table containing information
about a single PVC that has been configured. To
create a PVC at an ATM interface and bind it to a
VLAN, either of the following procedures are used :
Mu…
about a single PVC that has been configured. To
create a PVC at an ATM interface and bind it to a
VLAN, either of the following procedures are used :
Mu…
Indexes
capvcPort capvcVPI capvcVCI
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
capvcPort
The port number in the ATM module on
which this PVC is being configured. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.1 |
||||||||||||
|
capvcVPI
The Virtual Path Identifier for the PVC.
|
Unsigned32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.2 |
||||||||||||
|
capvcVCI
The Virtual Channel Identifier for the PVC.
|
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.3 |
||||||||||||
|
capvcVCD
This is the Virtual Channel Descriptor,
a value which uniquely identifies the PVC. This is a read-only variable and is not set by the user. When the PVC is created successfully, it is assigned a unique VCD number by th… |
Unsigned32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.4 |
||||||||||||
|
capvcType
The type of traffic that will flow
through the PVC. The user can configure the PVC as: (1) aal5snap PVC which carries network interconnect traffic over ATM AAL5 (RFC1483). (2) ilmi PVC which carries Inte… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.94.1.1.1.1.5 |
||||||||||||
|
capvcPCR
The Peak Cell Rate for the PVC. This
value denotes the bandwidth allocated for this PVC. The default value for this field is the maximum speed of the interface. This is 155000 Kbps for an OC3 Module and 45000 Kbps … |
kbpsUnsigned32r/w Constraints: range: 0-155000 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.6 |
||||||||||||
|
capvcOAM
A boolean that indicates if a F5 OAM
loopback cell will be sent on this PVC or not. The default value for this field is false. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.94.1.1.1.1.7 |
||||||||||||
|
capvcFrequency
Indicates how often will a F5 OAM
loopback cell be transmitted. If the value of capvcOAM is true, then the default value for this variable is 10 seconds. If the value of capvcOAM is false, then this variable is ign… |
secondsSNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.8 |
||||||||||||
|
capvcVlanId
The VLAN number of the VLAN that the
PVC is bound to. Binding a PVC say with VCD number x, to a VLAN with a VlanId y, causes the traffic on VLAN y to pass through PVC x. Also a PVC that is bound to a VLAN can be … |
Unsigned32r/w Constraints: range: 1-1024 |
.1.3.6.1.4.1.9.9.94.1.1.1.1.9 |
||||||||||||
|
capvcRowStatus
This object is used to create, delete
or modify a row in this table. To create a new PVC, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the follow… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.94.1.1.1.1.10 |