capvcFrequency
CISCO-ATM-PVC-MIB ·
.1.3.6.1.4.1.9.9.94.1.1.1.1.8
Object
Indicates how often will a F5 OAM loopback cell be transmitted. If the value of capvcOAM is true, then the default value for this variable is 10 seconds. If the value of capvcOAM is false, then this variable is ignored.
Context
- MIB
- CISCO-ATM-PVC-MIB
- OID
.1.3.6.1.4.1.9.9.94.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- capvcEntry
- Table
- capvcTable
- Siblings
- 9
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capvcPort The port number in the ATM module on
which this PVC is being configured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.94.1.1.1.1.1 |
| capvcRowStatus This object is used to create, delete
or modify a row in this table. To
create a new PVC, this object is
initially set to 'createAndWait' or
'createAndGo'. This object must n… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.94.1.1.1.1.10 |
| capvcVPI The Virtual Path Identifier for the PVC. | column | Unsigned32 | .1.3.6.1.4.1.9.9.94.1.1.1.1.2 |
| capvcVCI The Virtual Channel Identifier for the PVC. | column | Unsigned32 | .1.3.6.1.4.1.9.9.94.1.1.1.1.3 |
| capvcVCD This is the Virtual Channel Descriptor,
a value which uniquely identifies the PVC.
This is a read-only variable and is not
set by the user. When the PVC is created
successfully, … | column | Unsigned32 | .1.3.6.1.4.1.9.9.94.1.1.1.1.4 |
| capvcType The type of traffic that will flow
through the PVC. The user can configure
the PVC as:
(1) aal5snap PVC which carries network
interconnect traffic over ATM
AAL5 (RFC… | column | Enumeration | .1.3.6.1.4.1.9.9.94.1.1.1.1.5 |
| capvcPCR The Peak Cell Rate for the PVC. This
value denotes the bandwidth allocated
for this PVC. The default value for
this field is the maximum speed of the
interface. This is 155000… | column | kbps Unsigned32 | .1.3.6.1.4.1.9.9.94.1.1.1.1.6 |
| capvcOAM A boolean that indicates if a F5 OAM
loopback cell will be sent on this
PVC or not. The default value for
this field is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.94.1.1.1.1.7 |
| capvcVlanId The VLAN number of the VLAN that the
PVC is bound to.
Binding a PVC say with VCD number x,
to a VLAN with a VlanId y, causes the
traffic on VLAN y to pass through PVC x.
Als… | column | Unsigned32 | .1.3.6.1.4.1.9.9.94.1.1.1.1.9 |