CISCO-5800-HEALTH-MON-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
22
.1.3.6.1.4.1.9.10.28.1.1
·
1 row entry
·
8 columns
The table of status maintained by the health monitor.
An entry in the status table, containing the
information about the status of the health monitoring setup
commands. Depending on the configured monitoring type these commands
are setup on the shelf or on the system contr…
information about the status of the health monitoring setup
commands. Depending on the configured monitoring type these commands
are setup on the shelf or on the system contr…
Indexes
ciscoHealthMonStatusIndex ciscoHealthMonStatusType
| Column | Syntax | OID |
|---|---|---|
|
ciscoHealthMonStatusIndex
Unique index for indexing the ciscoHealthMonStatusTable.
This index is for SNMP purposes only, and has no intrinsic meaning. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.10.28.1.1.1.1 |
|
ciscoHealthMonStatusType
Monitoring type
modemUtil(1), trunkUtil(2), iomemUtil(3) |
Integer32 Constraints: range: 1-3 |
.1.3.6.1.4.1.9.10.28.1.1.1.2 |
|
ciscoHealthMonShelfId
This is the shelf-id of the monitored shelf.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.28.1.1.1.3 |
|
ciscoHealthMonAddress
This is the IP address of the monitored shelf.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.9.10.28.1.1.1.4 |
|
ciscoHealthMonDescr
Textual description of the utilization type being
monitored on a shelf. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.9.10.28.1.1.1.5 |
|
ciscoHealthMonValue
The current value for the monitoring type on a
monitored shelf. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.1.1.6 |
|
ciscoHealthMonThreshold
This is the monitoring threshold value configured
through the command line. If the configured monitoring type is io-mem, rmon alarm on the shelf will use this value as the threshold for generating the ev… |
Integer32 Constraints: range: 1-100 |
.1.3.6.1.4.1.9.10.28.1.1.1.7 |
|
ciscoHealthMonThresholdExceedCount
Number of times monitoring value exceeded the
configured threshold value. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.10.28.1.1.1.8 |
ciscoHealthMonCountTable
table.1.3.6.1.4.1.9.10.28.1.2
·
1 row entry
·
14 columns
The table of mib entries maintained by the health monitor.
An entry in the count table represents the polled data
of ceratin mib variables for a router shelf. System controller will do
the polling of the mib variables only if system controller can
talk to that particular router…
of ceratin mib variables for a router shelf. System controller will do
the polling of the mib variables only if system controller can
talk to that particular router…
Indexes
ciscoHealthMonCountIndex
| Column | Syntax | OID |
|---|---|---|
|
ciscoHealthMonCountIndex
Unique index for indexing the
ciscoHealthMonCountTable. This unique index represents the shelf-id of the monitored shelf. |
Integer32 Constraints: range: 0-9999 |
.1.3.6.1.4.1.9.10.28.1.2.1.1 |
|
ciscoHealthMonT1E1LinesUp
The number of active T1 and E1 lines on a shelf. A
line is considered as an active line if it is operationally up. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.2 |
|
ciscoHealthMonT1E1LinesDown
The number of inactive T1 and E1 lines on a
shelf. This is the special case where a line is counted as down if it is operationally down and administratively up. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.3 |
|
ciscoHealthMonActiveDS0
The number of DS0's that are currently in use.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.4 |
|
ciscoHealthMonTotalDS0
The total number of DS0's on a shelf. This is based
on the number of T1 and E1 lines present on the router shelf. Total DS0 = (# of T1 lines - 1 * 24) + 23 + (# of E1 lines*30). |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.5 |
|
ciscoHealthMonTotalModems
The total number of modems installed on a shelf. This
is the polled value for cmSystemInstalledModem from the router shelf. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.6 |
|
ciscoHealthMonModemsInUse
The number of modems on a shelf that are in the
following states: connected, offHook, loopback, or downloadFirmware. This the polled value for cmSystemModemsInUse from the router shelf. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.7 |
|
ciscoHealthMonUnavailableModems
The number of modems on a shelf that cannot accept the
calls. They are in the following states: unknown, onHook, busiedOut, disabled, bad, or downloadFirmwareFailed. This is the polled value for cmSystemModemsUnavailabl… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.8 |
|
ciscoHealthMonIOMemUsed
The number of bytes of IO memory that are currently
in use by the applications on the shelf. This is the polled value for ciscoMemoryPoolUsed of io-mem type on the router shelf. |
bytesSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.9 |
|
ciscoHealthMonIOMemFree
The number of bytes of IO memory that are currently
available to use on the shelf.This is the polled value for ciscoMemoryPoolFree of io-mem type on the router shelf. |
bytesSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.10 |
|
ciscoHealthMonCPUavgBusy5
5 minute exponentially-decayed moving average of the
CPU busy percentage. This is the polled value for avgBusy5 from the router shelf. |
Integer32 Constraints: range: 1-100 |
.1.3.6.1.4.1.9.10.28.1.2.1.11 |
|
ciscoHealthMonUtilEgressInOctet
This is the percentage utilization of total number of
octets received on all the active egress interface, including framing characters. A port is considered as an egress port if it's ifSpeed > 1544000 %… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.12 |
|
ciscoHealthMonUtilEgressOutOctet
This is the percentage utilization of the total
number of octets transmitted out on all the active egress interface, including framing characters. A port is considered as an egress port if it's ifSpeed > … |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.10.28.1.2.1.13 |
|
ciscoHealthMonShelfLastUpdate
This is the last time at which the system-controller
has polled the mib entries from a shelf. However, if system-controller can not talk to that shelf, this entry will have the same time as the last update and a string … |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.9.10.28.1.2.1.14 |