ciscoHealthMonT1E1LinesUp
CISCO-5800-HEALTH-MON-MIB ·
.1.3.6.1.4.1.9.10.28.1.2.1.2
Object
column
SNMPv2-SMIGauge32
The number of active T1 and E1 lines on a shelf. A line is considered as an active line if it is operationally up.
Context
- MIB
- CISCO-5800-HEALTH-MON-MIB
- OID
.1.3.6.1.4.1.9.10.28.1.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoHealthMonCountEntry
- Table
- ciscoHealthMonCountTable
- Siblings
- 13
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoHealthMonCountIndex Unique index for indexing the
ciscoHealthMonCountTable. This unique index represents the shelf-id of
the monitored shelf. | column | Integer32 | .1.3.6.1.4.1.9.10.28.1.2.1.1 |
| ciscoHealthMonIOMemFree The number of bytes of IO memory that are currently
available to use on the shelf.This is the polled value for
ciscoMemoryPoolFree of io-mem type on the router shelf. | column | bytes SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.10 |
| ciscoHealthMonCPUavgBusy5 5 minute exponentially-decayed moving average of the
CPU busy percentage. This is the polled value for avgBusy5 from the
router shelf. | column | Integer32 | .1.3.6.1.4.1.9.10.28.1.2.1.11 |
| ciscoHealthMonUtilEgressInOctet This is the percentage utilization of total number of
octets received on all the active egress interface, including framing
characters.
A port is considered as an … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.28.1.2.1.12 |
| ciscoHealthMonUtilEgressOutOctet This is the percentage utilization of the total
number of octets transmitted out on all the active egress interface,
including framing characters.
A port is conside… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.28.1.2.1.13 |
| ciscoHealthMonShelfLastUpdate This is the last time at which the system-controller
has polled the mib entries from a shelf. However, if system-controller
can not talk to that shelf, this entry will have the sa… | column | OctetString | .1.3.6.1.4.1.9.10.28.1.2.1.14 |
| ciscoHealthMonT1E1LinesDown The number of inactive T1 and E1 lines on a
shelf. This is the special case where a line is counted as down if it
is operationally down and administratively up. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.3 |
| ciscoHealthMonActiveDS0 The number of DS0's that are currently in use. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.4 |
| ciscoHealthMonTotalDS0 The total number of DS0's on a shelf. This is based
on the number of T1 and E1 lines present on the router shelf.
Total DS0 = (# of T1 lines - 1 * 24) + 23 + (# of … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.5 |
| ciscoHealthMonTotalModems The total number of modems installed on a shelf. This
is the polled value for cmSystemInstalledModem from the router shelf. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.6 |
| ciscoHealthMonModemsInUse The number of modems on a shelf that are in the
following states: connected, offHook, loopback, or
downloadFirmware. This the polled value for cmSystemModemsInUse from
the router … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.7 |
| ciscoHealthMonUnavailableModems The number of modems on a shelf that cannot accept the
calls. They are in the following states: unknown, onHook, busiedOut,
disabled, bad, or downloadFirmwareFailed. This is the p… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.8 |
| ciscoHealthMonIOMemUsed The number of bytes of IO memory that are currently
in use by the applications on the shelf. This is the polled value for
ciscoMemoryPoolUsed of io-mem type on the router shelf. | column | bytes SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.28.1.2.1.9 |