BIANCA-BRICK-SERIAL-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
28
.1.3.6.1.4.1.272.4.25.1
·
1 row entry
·
28 columns
The serialIfTable contains information relating to the
interfaces available on the system. Each entry corresponds to
an available serial interface. Entries cannot be added or
deleted by the user.
Creating entries: Entries are created by the system
automatically when a new serial module is installed.
Deleting entries: Entries are removed by the system
after the appropriate serial module is removed.
Indexes
serialIfIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
serialIfIndex
mandatory
Unique interface index of the serial interface.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.25.1.1.1 |
||||||||||||||||||
|
serialIfType
mandatory
The serial physical interface type
none(1) interface disabled x21(2) X21(V11) terminated (sync) v35(3) V35(V11 & V28) (sync) v36(4) V36(V10 & V11) (sync) x21bis(5) RS232(V28) … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.2 |
||||||||||||||||||
|
serialIfConnector
mandatory
The physical connector type.
When configured as DCE the pins on the output connector act as a DCE interface. If configured as DTE on the output connector act as a DTE interface. dte(1) DTE output pins dce(2) DC… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.3 |
||||||||||||||||||
|
serialIfLeads
mandatory
The value of IfLeads has influence on the state of the
physical layer (L1State). When configured as IfLeads=enabled, the state of the physical layer depends on the signals of the control interface pins Indication/Contro… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.4 |
||||||||||||||||||
|
serialIfClock
mandatory
The physical layer (layer 1) clocking mode.
When configured as AUTO the clock provided depends what is configured on connector. If connector is configured as DTE clock must provided from external, if the connector is co… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.5 |
||||||||||||||||||
|
serialIfClockEdge
mandatory
The value of IfClockEdge influences the (internal) active
clock edge(s) for generating/sampling data on the serial line. This value should be left on DEFAULT under normal circumstances. Nevertheless, in some rare cas… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.6 |
||||||||||||||||||
|
serialIfSpeed
mandatory
The serial interface speed in bits per second. The range
is dependant on the type of the line (balanced/unbalanced) and the quality and length of the cable. Over a short distance (about 5 m) and with a shielded cable s… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.25.1.1.8 |
||||||||||||||||||
|
serialIfL2Mode
mandatory
The layer 2 mode. This value has influence on the
HDLC address field (first byte of a HDCL frame). When configured as DTE the address in a command frame is 0x01, when configured as DCE it is 0x03. For response frames it… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.10 |
||||||||||||||||||
|
serialIfCableDetection
mandatory
Cable autodetection for:
manual(1) disabled auto(2) serialIfType and serialIfConnector iftype(3) serialIfType connector(4) serialIfConnector |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.11 |
||||||||||||||||||
|
serialIfCableType
mandatory
Show the detected cable type:
unknown(1) cable type unknown. x21(2) DB15, X27/V11 (sync) v35(3) M34, V35/V10 (sync) v36(4) DB37, V10/V11 (sync) x21bis(5) DB… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.12 |
||||||||||||||||||
|
serialIfCableConnector
mandatory
Show the detected cable connector type:
dte(1) DTE cable dce(2) DCE cable unknown(3) cable type unknown. not-supported(4) cable detection not supported. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.13 |
||||||||||||||||||
|
serialIfBundle
mandatory
Index of the bundle to aggregate multiple Channels
to one interface. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.25.1.1.14 |
||||||||||||||||||
|
serialIfL1State
mandatory
The serial physical layer state
dn(1) physical layer is inactive up(2) physical layer is active |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.15 |
||||||||||||||||||
|
serialIfSpeedReal
mandatory
In DCE/internal clock mode this is the rounded speed in bits per
second, because not every baudrate can exactly be generated. In DTE/external clock mode this is the measured speed, where measurement is possible, or the … |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.16 |
||||||||||||||||||
|
serialIfLicense
mandatory
Shows wether a serial license associated with this serial port
port is required, missing or in use. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.25.1.1.17 |
||||||||||||||||||
|
serialIfRxPackets
mandatory
Count of received valid Frames.
|
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.20 |
||||||||||||||||||
|
serialIfRxOctets
mandatory
Count of received bytes.
|
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.21 |
||||||||||||||||||
|
serialIfTxPackets
mandatory
Count of transmitted valid Frames.
|
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.22 |
||||||||||||||||||
|
serialIfTxOctets
mandatory
Count of transmitted bytes.
|
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.23 |
||||||||||||||||||
|
serialIfRxResets
mandatory
Count of receiver resets. Under rare circumstances it
might be necessary to reset the receiver to work properly. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.24 |
||||||||||||||||||
|
serialIfRxAborts
mandatory
Count of receiver aborts. The sender of a frame can
indicate a frame as aborted with a special Abort sequence. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.25 |
||||||||||||||||||
|
serialIfRxOverruns
mandatory
Count of receiver overruns. If the serial port is unable
to grant sufficiently soon/often the bus, the RxFIFO may fill up. This leads to loss of data. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.26 |
||||||||||||||||||
|
serialIfRxCRCErrors
mandatory
Count of corrupted frames. Errors due to interference
on the serial cable. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.27 |
||||||||||||||||||
|
serialIfRxGiantFrames
mandatory
Count of received frames with illegal framesize. This
can occur if a frame delimiter is destroyed. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.28 |
||||||||||||||||||
|
serialIfTxResets
mandatory
Count of transmitter resets. Under rare circumstances
it might be necessary to reset the transmitter to work properly. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.29 |
||||||||||||||||||
|
serialIfTxAborts
mandatory
Count of transmitter aborts. While sending a frame it
might be necessary to indicate this frame as aborted. In this case the receiver regards this frame as illegal. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.30 |
||||||||||||||||||
|
serialIfTxUnderruns
mandatory
Count of transmitter underruns. The serial data for the
serial port is supplied too slowly. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.31 |
||||||||||||||||||
|
serialIfTxGiantFrames
mandatory
Count of transmitted frames with illegal
framesize. This can occur if an upper module creates packets with more than the maximum allowed packet size. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.25.1.1.32 |