BIANCA-BRICK-MIBMODEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
39

mdmProfileTable

table mandatory
.1.3.6.1.4.1.272.4.18.1 · 1 row entry · 18 columns
Open in standard view 
This Table contains entries for the modem profiles. For
PPP connections, modem profiles are assigned to incoming
connections via the isdnDispatchtable. For outgoing
connections, the profile is assigned by the biboPppTable.
Profile 1 is used as default profile for ppp and is the
only profile available for isdnlogin connections.
mdmProfileEntry entry .1.3.6.1.4.1.272.4.18.1.1
Indexes
mdmProfileName
Column Syntax OID
mdmProfileName mandatory
The name of the profile. Eight profiles are available.
Enumeration
Enumerated Values:
1profile-1
2profile-2
3profile-3
4profile-4
5profile-5
6profile-6
7profile-7
8profile-8
 .1.3.6.1.4.1.272.4.18.1.1.1
mdmProfileDescr mandatory
Profile Description. Info only.
r/w .1.3.6.1.4.1.272.4.18.1.1.2
mdmProfileModulation mandatory
This object specifies the preferred modulation (automode on)
or the modulation (automode disabled) to be used in originating
or answering a connection.
bell103 (1) : 300
bell212 (2) : 1200
v21 (3) : 300
v22 …
Enumerationr/w
Enumerated Values:
1bell103
2bell212
3v21
4v22
5v22bis
6v23
7v32
8v32bis
9v34
10k56flex
11vfc
12v90
 .1.3.6.1.4.1.272.4.18.1.1.3
mdmProfileMinBps mandatory
This object specified the lowest rate, at which the modem may
establish a connection.
Enumerationr/w
Enumerated Values:
75b75
300b300
1200b1200
2400b2400
4800b4800
7200b7200
9600b9600
12000b12000
14400b14400
16800b16800
19200b19200
21600b21600
24000b24000
26400b26400
28800b28800
31200b31200
32000b32000
33600b33600
34000b34000
36000b36000
38000b38000
40000b40000
42000b42000
44000b44000
46000b46000
48000b48000
50000b50000
52000b52000
54000b54000
56000b56000
 .1.3.6.1.4.1.272.4.18.1.1.4
mdmProfileMaxRecvBps mandatory
This object specifies the highest receive rate, at which the
modem may establsh a connection.
Enumerationr/w
Enumerated Values:
300b300
1200b1200
2400b2400
4800b4800
7200b7200
9600b9600
12000b12000
14400b14400
16800b16800
19200b19200
21600b21600
24000b24000
26400b26400
28800b28800
31200b31200
32000b32000
33600b33600
34000b34000
36000b36000
38000b38000
40000b40000
42000b42000
44000b44000
46000b46000
48000b48000
50000b50000
52000b52000
54000b54000
56000b56000
 .1.3.6.1.4.1.272.4.18.1.1.5
mdmProfileMaxXmitBps mandatory
This object specifies the highest transmit rate, at which the
modem may establsh a connection.
Enumerationr/w
Enumerated Values:
300b300
1200b1200
2400b2400
4800b4800
7200b7200
9600b9600
12000b12000
14400b14400
16800b16800
19200b19200
21600b21600
24000b24000
26400b26400
28800b28800
31200b31200
32000b32000
33600b33600
34000b34000
36000b36000
38000b38000
40000b40000
42000b42000
44000b44000
46000b46000
48000b48000
50000b50000
52000b52000
54000b54000
56000b56000
 .1.3.6.1.4.1.272.4.18.1.1.6
mdmProfileAutoMode mandatory
When this object is set to on, the modem will automatically
negotiate the best rates beginning with the selected
Modulation and MaxBps values. Otherwise, it will use only
the selected modulation in the range between Min…
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.272.4.18.1.1.7
mdmProfileComprV42bis mandatory
This object specifies, whether V.42bis compression
shall be used for modem connections. When set to off,
V.42bis compression will never be used. When set to auto,
compression may be negotiated with the partner modem.
Enumerationr/w
Enumerated Values:
1off
2auto
 .1.3.6.1.4.1.272.4.18.1.1.8
mdmProfileComprMNP5 mandatory
This object specifies, whether MNP Class 5 compression
shall be used for modem connections. When set to off,
MNP Class 5 compression will never be used. When set to auto,
compression may be negotiated with the partner m…
Enumerationr/w
Enumerated Values:
1off
2auto
 .1.3.6.1.4.1.272.4.18.1.1.9
mdmProfileErrorCorr mandatory
This object specifies the kind of error correction being
used for a connection:
none no error correction will be used.

required either LAPM or MNP will be used.
If the partner is not able to
do e…
Enumerationr/w
Enumerated Values:
1none
2required
3auto
4lapm
5mnp
 .1.3.6.1.4.1.272.4.18.1.1.10
mdmProfileXmitLevel mandatory
This object specifies the transmit attenuation in dB.
Integer32r/w
Constraints:
range: -15-0
 .1.3.6.1.4.1.272.4.18.1.1.11
mdmProfileCDWaitTime mandatory
This object specifies the amount of time in milliseconds,
the modem will wait for the appearance of the carrier. If
the carrier will not appear in this time period, the
connection will be disconnected.
Integer32r/w
Constraints:
range: 1000-255000
 .1.3.6.1.4.1.272.4.18.1.1.12
mdmProfileCDRespTime mandatory
This object specifies the period of time in milliseconds,
a carrier has to be present, before it will be recognized
as a carrier.
Integer32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.272.4.18.1.1.13
mdmProfileCDDiscTime mandatory
This object specifies the amount of time, the carrier has to
drop, before the modem will assume the carrier to be lost.
Integer32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.272.4.18.1.1.14
mdmProfileRetrain mandatory
The modem will :
off (1) : disable line quality monitor and auto-retrain.
retrain (2) : enable line quality monitor and auto-retrain.
fallbf (3) : enable line quality monitor and fallback/fall forward.
Enumerationr/w
Enumerated Values:
1off
2retrain
3fallbf
 .1.3.6.1.4.1.272.4.18.1.1.15
mdmProfileIdleTimerMode mandatory
The idle timer is used to specify the duration of an interval between
successive characters received from the modem which, when exceeded,
will cause the modem driver to terminate the assembly of a data packet
and to for…
Enumerationr/w
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.272.4.18.1.1.16
mdmProfileIdleTimerFixedDelay mandatory
This object specifies the duration of the idle timer in milliseconds
(see the object mdmProfileIdleTimerMode for further description).
Default: 5
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.272.4.18.1.1.17
mdmProfileIdleTimerCharDelay mandatory
This object specifies the number of characters (octets) which is used
to calculate the idle timer corresponding to the actually used receive
bit-rate of the modem (see the object mdmProfileIdleTimerMode for further
desc…
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.272.4.18.1.1.18

mdmTable

table mandatory
.1.3.6.1.4.1.272.4.18.2 · 1 row entry · 12 columns
Open in standard view 
The mdmTable contains information for each modem. The entries
contain various statistical data for modem connections. Only the
system can add entries to this table. The user is able to reboot,
enable or disable a modem. The system updates infos about the
current connection.
mdmEntry entry .1.3.6.1.4.1.272.4.18.2.1
Indexes
mdmIndex
Column Syntax OID
mdmIndex mandatory
Index of this modem (Slot/Cpu/Modem)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.18.2.1.1
mdmAction mandatory
Writing to this variable
reboot (1) : initiates a reboot.
disabled (2) : remove modem resource from allocation pool.
enabled (3) : put modem to allocation resource pool.
Enumerationr/w
Enumerated Values:
1reboot
2disabled
3enabled
 .1.3.6.1.4.1.272.4.18.2.1.2
mdmType mandatory
Type of this modem
csm56K (1) : CentralSiteModem K56Flex
csm336 (2) : CentralSiteModem 33600
mdm144 (3) : ClientSiteModem 14400
mdm336 (4) : ClientSiteModem 33600
telindus (5) : ADSP with Telindus firmware
Enumeration
Enumerated Values:
1csm56K
2csm336
3mdm144
4mdm336
5telindus
 .1.3.6.1.4.1.272.4.18.2.1.3
mdmState mandatory
Current status of the modem.
booting (1) : init phase
idle (2) : this modem resource is available
calling (3) : outgoing call initiated
called (4) : incoming call initiated
connected (5) : data transfer phas…
Enumeration
Enumerated Values:
1booting
2idle
3calling
4called
5connected
6hangup
7stopped
 .1.3.6.1.4.1.272.4.18.2.1.4
mdmMode mandatory
Type of mode
modem (1) : modem native
ppp (2) : modem native + async hdlc
fax (3) : fax mode
dtmf (4) : receive and signal DTMF touchtones
voice (5) : support various VoIP modes
none (7) : modem curently not used
Enumeration
Enumerated Values:
1modem
2ppp
3fax
4dtmf
5voice
7none
 .1.3.6.1.4.1.272.4.18.2.1.5
mdmModulation mandatory
Negotiated modulation. same as mdmProfileModulation.
Enumeration
Enumerated Values:
1bell103
2bell212
3v21
4v22
5v22bis
6v23
7v32
8v32bis
9v34
10k56flex
11vfc
12v90
31unknown
 .1.3.6.1.4.1.272.4.18.2.1.6
mdmErrorCorr mandatory
Negotiated error correction protocol.
none (1) : no error correction
alt (2) : MNP error correction established
lapm (3) : LAPM error correction established
Enumeration
Enumerated Values:
1none
2alt
3lapm
 .1.3.6.1.4.1.272.4.18.2.1.7
mdmCompression mandatory
Negotiated compression correction protocol.
none (1) : no compression
class5 (2) : MNP5 compression
v42bis (3) : V.42bis compression
Enumeration
Enumerated Values:
1none
2class5
3v42bis
 .1.3.6.1.4.1.272.4.18.2.1.8
mdmXmitSpeed mandatory
Negotiated transmit speed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.18.2.1.9
mdmRcvSpeed mandatory
Negotiated receive speed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.18.2.1.10
mdmIfIndex mandatory
the (ISDN) interface's slot this modem is connected to
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.18.2.1.11
mdmIfBchannel mandatory
the (ISDN) interface's B channel this modem is connected to
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.272.4.18.2.1.12

voipProfileTable

table mandatory
.1.3.6.1.4.1.272.4.18.3 · 1 row entry · 9 columns
Open in standard view 
This Table contains entries for the voice profiles
supported by the installed modem.
voipProfileEntry entry .1.3.6.1.4.1.272.4.18.3.1
Indexes
voipProfileName
Column Syntax OID
voipProfileName mandatory
The name of the profile. A maximum of ten profiles
is available depending on the hardware/firmware
version and availability of license information.
voip-profile-1 (1) : G.711 A-Law + RTP + EchoC
voip-profile-2 (…
Enumeration
Enumerated Values:
1voip-profile-1
2voip-profile-2
3voip-profile-3
4voip-profile-4
5voip-profile-5
6voip-profile-6
7voip-profile-7
8voip-profile-8
9voip-profile-9
10voip-profile-10
 .1.3.6.1.4.1.272.4.18.3.1.1
voipProfileDescr mandatory
Profile Description. Info only.
r/w .1.3.6.1.4.1.272.4.18.3.1.2
voipProfileEncoding mandatory
This object specifies the preferred voice encoding
algorithm.
g711uLaw (1) : G.711 u-Law 64.0 kbit/s
g711aLaw (2) : G.711 A-Law 64.0 kbit/s
g729a (3) : G.729A CS-ACELP 8.0 kbit/s
g729b (4) : G.729…
Enumerationr/w
Enumerated Values:
1g711uLaw
2g711aLaw
3g729a
4g729b
5g723-63
6g723-53
 .1.3.6.1.4.1.272.4.18.3.1.3
voipProfileEncapsulation mandatory
This object specified the encapsulation mode of the
voice data.
Enumerationr/w
Enumerated Values:
1raw
2rtp
3aal2
 .1.3.6.1.4.1.272.4.18.3.1.4
voipProfileEchoCancellation mandatory
This object enables or disables the G.164 echo
cancellation.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.272.4.18.3.1.5
voipProfileComfortNoise mandatory
This object enables or disables the voice activity
detection and comfort noise generation.
none (1) : linear voice stream
vad (2) : voice activity detection
cng (3) : comfort noise generation
vad-cng …
Enumerationr/w
Enumerated Values:
1none
2vad
3cng
4vad-cng
 .1.3.6.1.4.1.272.4.18.3.1.6
voipProfilePacketLength mandatory
This object defines the default packet length in milliseconds
of the different voice compression algorithms.
g729 : 10 bytes / 10 ms
g723-acelp : 20 bytes / 30 ms
g723-mp-mlq : 24 bytes / 30 ms
g711 …
Integer32r/w
Constraints:
range: 10-255
 .1.3.6.1.4.1.272.4.18.3.1.7
voipProfilePacketInterval mandatory
This object specifies the number of ms coded in one
voice data packet. Must be a multiple of the time
implicitely defined by voipProfilePacketLength above.
Integer32r/w
Constraints:
range: 10-210
 .1.3.6.1.4.1.272.4.18.3.1.8
voipProfileJitterBufferDelay mandatory
This object specifies the initial delay of the adaptive
jitter buffer.
Integer32r/w
Constraints:
range: 10-250
 .1.3.6.1.4.1.272.4.18.3.1.9