mdmProfileErrorCorr
BIANCA-BRICK-MIBMODEM-MIB ·
.1.3.6.1.4.1.272.4.18.1.1.10
Object
column
mandatory
r/w
Enumeration
This object specifies the kind of error correction being
used for a connection:
none no error correction will be used.
required either LAPM or MNP will be used.
If the partner is not able to
do error correction, the connection
cannot be established.
auto negotiation takes place to
use either LAPM, MNP or no
error correction.
lapm Enforce LAPM error correction.
If the partner is not able to
do LAPM, the connection
cannot be established.
mnp use MNP error connection
If the partner is not able to
do MNP, the connection
cannot be established.
Context
- MIB
- BIANCA-BRICK-MIBMODEM-MIB
- OID
.1.3.6.1.4.1.272.4.18.1.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- mdmProfileEntry
- Table
- mdmProfileTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | required |
3 | auto |
4 | lapm |
5 | mnp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdmProfileName mandatory The name of the profile. Eight profiles are available. | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.1 |
| mdmProfileXmitLevel mandatory This object specifies the transmit attenuation in dB. | column | Integer32 | .1.3.6.1.4.1.272.4.18.1.1.11 |
| mdmProfileCDWaitTime mandatory This object specifies the amount of time in milliseconds,
the modem will wait for the appearance of the carrier. If
the carrier will not appear in this time period, the
connection… | column | Integer32 | .1.3.6.1.4.1.272.4.18.1.1.12 |
| mdmProfileCDRespTime mandatory This object specifies the period of time in milliseconds,
a carrier has to be present, before it will be recognized
as a carrier. | column | Integer32 | .1.3.6.1.4.1.272.4.18.1.1.13 |
| mdmProfileCDDiscTime mandatory This object specifies the amount of time, the carrier has to
drop, before the modem will assume the carrier to be lost. | column | Integer32 | .1.3.6.1.4.1.272.4.18.1.1.14 |
| mdmProfileRetrain mandatory The modem will :
off (1) : disable line quality monitor and auto-retrain.
retrain (2) : enable line quality monitor and auto-retrain.
fallbf (3) : enable line quality monitor… | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.15 |
| mdmProfileIdleTimerMode mandatory The idle timer is used to specify the duration of an interval between
successive characters received from the modem which, when exceeded,
will cause the modem driver to terminate … | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.16 |
| mdmProfileIdleTimerFixedDelay mandatory This object specifies the duration of the idle timer in milliseconds
(see the object mdmProfileIdleTimerMode for further description).
Default: 5 | column | Integer32 | .1.3.6.1.4.1.272.4.18.1.1.17 |
| mdmProfileIdleTimerCharDelay mandatory This object specifies the number of characters (octets) which is used
to calculate the idle timer corresponding to the actually used receive
bit-rate of the modem (see the object … | column | Integer32 | .1.3.6.1.4.1.272.4.18.1.1.18 |
| mdmProfileDescr mandatory Profile Description. Info only. | column | - | .1.3.6.1.4.1.272.4.18.1.1.2 |
| mdmProfileModulation mandatory This object specifies the preferred modulation (automode on)
or the modulation (automode disabled) to be used in originating
or answering a connection.
bell103 (1) : 300
bell212 … | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.3 |
| mdmProfileMinBps mandatory This object specified the lowest rate, at which the modem may
establish a connection. | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.4 |
| mdmProfileMaxRecvBps mandatory This object specifies the highest receive rate, at which the
modem may establsh a connection. | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.5 |
| mdmProfileMaxXmitBps mandatory This object specifies the highest transmit rate, at which the
modem may establsh a connection. | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.6 |
| mdmProfileAutoMode mandatory When this object is set to on, the modem will automatically
negotiate the best rates beginning with the selected
Modulation and MaxBps values. Otherwise, it will use only
the sele… | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.7 |
| mdmProfileComprV42bis mandatory This object specifies, whether V.42bis compression
shall be used for modem connections. When set to off,
V.42bis compression will never be used. When set to auto,
compression may … | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.8 |
| mdmProfileComprMNP5 mandatory This object specifies, whether MNP Class 5 compression
shall be used for modem connections. When set to off,
MNP Class 5 compression will never be used. When set to auto,
compress… | column | Enumeration | .1.3.6.1.4.1.272.4.18.1.1.9 |