BIANCA-BRICK-HDSL2SHDSL2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
68

hdsl2ShdslInventoryTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.3 · 1 row entry · 13 columns
Open in standard view 
This table supports retrieval of unit inventory information
available via the EOC from units in a HDSL2/SHDSL line.
          
Entries in this table are dynamically created during the
line discovery process.  The life cycle for these entries
is as follows:
          
- xtu discovers a device, either a far-end xtu or an xru
- an inventory table entry is created for the device
- the line goes down for whatever reason
- inventory table entries for unreachable devices are
  destroyed.
          
As these entries are created/destroyed dynamically, they
are NOT persistent.
hdsl2ShdslInventoryEntry entry .1.3.6.1.4.1.272.4.35.1.1.3.1
An entry in the hdsl2ShdslInventoryTable. Each entry
represents inventory information for a single unit in a
HDSL2/SHDSL line. It is indexed by the ifIndex of the
HDSL2/SHDSL line.
Indexes
hdsl2ShdslInvIfIndex
Column Syntax OID
hdsl2ShdslInvIfIndex mandatory
This object specifies the associated interface index of
this HDSL2/SHDSL line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.3.1.1
hdsl2ShdslInvIndex mandatory
Each entry in this table corresponds to a physical element
in a HDSL2/SHDSL Span. It is based on the EOC unit addressing
scheme with reference to the xtuC.
Enumeration
Enumerated Values:
1xtuC
2xtuR
3xru1
4xru2
5xru3
6xru4
7xru5
8xru6
9xru7
10xru8
 .1.3.6.1.4.1.272.4.35.1.1.3.1.2
hdsl2ShdslInvVendorID mandatory
Vendor ID as reported in an Inventory Response message.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.272.4.35.1.1.3.1.3
hdsl2ShdslInvVendorModelNumber mandatory
Vendor model number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.272.4.35.1.1.3.1.4
hdsl2ShdslInvVendorSerialNumber mandatory
Vendor serial number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.272.4.35.1.1.3.1.5
hdsl2ShdslInvVendorEOCSoftwareVersion mandatory
Vendor EOC version as reported in a Discovery Response
message.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.3.1.6
hdsl2ShdslInvStandardVersion mandatory
Version of the HDSL2/SHDSL standard implemented, as reported
in an Inventory Response message.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.3.1.7
hdsl2ShdslInvVendorListNumber mandatory
Vendor list number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.272.4.35.1.1.3.1.8
hdsl2ShdslInvVendorIssueNumber mandatory
Vendor issue number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.272.4.35.1.1.3.1.9
hdsl2ShdslInvVendorSoftwareVersion mandatory
Vendor software version as reported in an Inventory Response
message.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.272.4.35.1.1.3.1.10
hdsl2ShdslInvEquipmentCode mandatory
Equipment code conforming to ANSI T1.213, Coded Identification
of Equipment Entities.
OctetString
Constraints:
range: 10-10
 .1.3.6.1.4.1.272.4.35.1.1.3.1.11
hdsl2ShdslInvVendorOther mandatory
Other vendor information as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.272.4.35.1.1.3.1.12
hdsl2ShdslInvTransmissionModeCapability mandatory
Contains the transmission mode capability of the SHDSL unit:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B
Enumeration
Enumerated Values:
1region1
2region2
 .1.3.6.1.4.1.272.4.35.1.1.3.1.13

hdsl2ShdslEndpointConfTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.4 · 1 row entry · 15 columns
Open in standard view 
This table supports configuration parameters for segment
endpoints in a HDSL2/SHDSL line.  As this table is indexed
by ifIndex, it MUST be maintained in a persistent manner.
Entries in this table are created by the system only.
hdsl2ShdslEndpointConfEntry entry .1.3.6.1.4.1.272.4.35.1.1.4.1
An entry in the hdsl2ShdslEndpointConfTable. Each entry
represents a single segment endpoint in a HDSL2/SHDSL line.
It is indexed by the ifIndex of the HDSL2/SHDSL line.
Indexes
hdsl2ShdslEndpointConfIfIndex
Column Syntax OID
hdsl2ShdslEndpointConfIfIndex mandatory
This object specifies the associated interface index of
this HDSL2/SHDSL line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.4.1.1
hdsl2ShdslEndpointConfSide mandatory
The side of the unit associated with this segment endpoint -
Network/Customer side - as per the Hdsl2ShdslUnitSide textual
convention.
Enumerationr/w
Enumerated Values:
1networkSide
2customerSide
 .1.3.6.1.4.1.272.4.35.1.1.4.1.2
hdsl2ShdslEndpointConfWireInterface mandatory
This object configures the bonding mode of
the SHDSL Line.
twoWire(1) : no bonding is used
fourWire(2) : four-wire mode
fourWireStandard(3) : four-wire mode, disable globespan enhanced mode
fourWireIMA…
Enumerationr/w
Enumerated Values:
1twoWire
2fourWire
3fourWireStandard
4fourWireIMA
5sixWire
6sixWireIMA
7eightWire
8eightWireIMA
9not-used
10groupMember
11twoWireEFM
12fourWireEFM
13sixWireEFM
14eightWireEFM
 .1.3.6.1.4.1.272.4.35.1.1.4.1.5
hdsl2ShdslEndpointConfMinLineRate mandatory
This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.4.1.6
hdsl2ShdslEndpointConfMaxLineRate mandatory
This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.4.1.7
hdsl2ShdslEndpointConfTransmissionMode mandatory
This object specifies the regional setting for the SHDSL
line:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B
Enumerationr/w
Enumerated Values:
1region1
2region2
3region1or2
 .1.3.6.1.4.1.272.4.35.1.1.4.1.8
hdsl2ShdslEndpointConfWorstCaseTargetMarginDown mandatory
This object specifies the downstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
margin is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.272.4.35.1.1.4.1.11
hdsl2ShdslEndpointConfWorstCaseTargetMarginUp mandatory
This object specifies the upstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: -10-21
 .1.3.6.1.4.1.272.4.35.1.1.4.1.13
hdsl2ShdslEndpointConfGroupId mandatory
This object defines which wire-pairs belong to the same
M-pair group or IMA group. Members of the same group have
the same entry.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.272.4.35.1.1.4.1.14
hdsl2ShdslEndpointConfLineProbeEnable mandatory
This object specifies the configuration of the PMMS
behavior:
auto - Line Probe is enabled if hdsl2ShdslEndpointConfMinLineRate
< hdsl2ShdslEndpointConfMaxLineRate.
disable - Line Probe is disabled.
enable - Line …
Enumerationr/w
Enumerated Values:
1auto
2disable
3enable
4enable-std
 .1.3.6.1.4.1.272.4.35.1.1.4.1.15
hdsl2ShdslEndpointConfLicenseUsage mandatory
Shows which license type is currently used for this
SHDSL interface.
Enumeration
Enumerated Values:
1none
2missing
3shdsl
 .1.3.6.1.4.1.272.4.35.1.1.4.1.16
hdsl2ShdslEndpointConfPamMode mandatory
This object specifies which modulation modes are allowed
for this wire pair.
16 - 16-TCPAM, used for Annex A,B and F,G.
32 - 32-TCPAM, used for Annex F,G only.
4, 8, 64, 128 - non standard proprietary mod…
Integer32r/w
Constraints:
range: 4-252
 .1.3.6.1.4.1.272.4.35.1.1.4.1.17
hdsl2ShdslEndpointConfTotalMinLineRate mandatory
This object configures the minimum transmission rate
in bits-per-second (bps) for the associated SHDSL bundle.
The associated interfaces go up only when the sum of the
data rates of the associated wire pairs in state S…
Integer32r/w
Constraints:
range: 1-50000000
 .1.3.6.1.4.1.272.4.35.1.1.4.1.18
hdsl2ShdslEndpointConfMinWirePairs mandatory
This object configures the minimum number of wire pairs
for the associated SHDSL bundle. The associated interfaces
go up only when at least the specified number of wire pairs
is connected and in Showtime.
This variable …
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.272.4.35.1.1.4.1.19
hdsl2ShdslEndpointConfCapListStyle mandatory
This object specifies the data format of the capability list,
that is exchanged during the G.994.1 handshake:
auto - automatic detection of the used capability list style.
old - only ATM modes till 2312 kbps can be nego…
Enumerationr/w
Enumerated Values:
1auto
2old
3new
 .1.3.6.1.4.1.272.4.35.1.1.4.1.20

hdsl2ShdslEndpointCurrTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.5 · 1 row entry · 33 columns
Open in standard view 
This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL Lines.  As with other
tables in this MIB indexed by ifIndex, entries in this table
MUST be maintained in a persistent manner. Entries in this
table are created by the system only.
hdsl2ShdslEndpointCurrEntry entry .1.3.6.1.4.1.272.4.35.1.1.5.1
An entry in the hdsl2ShdslEndpointCurrTable. Each entry
contains status and performance information relating to a
single segment endpoint. It is indexed by the ifIndex of the
HDSL2/SHDSL line.
Indexes
hdsl2ShdslEndpointCurrIfIndex
Column Syntax OID
hdsl2ShdslEndpointCurrIfIndex mandatory
This object specifies the associated interface index of
this HDSL2/SHDSL line.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.1
hdsl2ShdslEndpointCurrReceivedBlks mandatory
Count of all encoded blocks received on this channel
since agent reset.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.2
hdsl2ShdslEndpointCurrTransmittedBlks mandatory
Count of all encoded blocks transmitted on this channel
since agent reset.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.3
hdsl2ShdslEndpointCurrCorrectedBlks mandatory
Count of all blocks received with errors that were
corrected since agent reset. These blocks are passed
on as good data.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.4
hdsl2ShdslEndpointCurrUncorrectBlks mandatory
Count of all blocks received with uncorrectable errors
since agent reset.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.5
hdsl2ShdslEndpointCurrAtn mandatory
The current loop attenuation for this endpoint as reported in
a Network or Customer Side Performance Status message.
Integer32
Constraints:
range: -127-128
 .1.3.6.1.4.1.272.4.35.1.1.5.1.6
hdsl2ShdslEndpointCurrSnrMgn mandatory
The current SNR margin for this endpoint as reported in a
Status Response/SNR message.
Integer32
Constraints:
range: -127-128
 .1.3.6.1.4.1.272.4.35.1.1.5.1.7
hdsl2ShdslEndpointCurrStatus mandatory
Contains the current state of the endpoint. This is a
bitmap of possible conditions. The various bit positions
are:

noDefect There no defects on the line.

powerBackoff …
Enumeration
Enumerated Values:
1noDefect
2powerBackoff
3deviceFault
4dcContinuityFault
5snrMarginAlarm
7loswFailureAlarm
8configInitFailure
9protocolInitFailure
10noNeighborPresent
11loopbackActive
 .1.3.6.1.4.1.272.4.35.1.1.5.1.8
hdsl2ShdslEndpointES mandatory
Count of Errored Seconds (ES) on this endpoint since the xU
was last restarted.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.9
hdsl2ShdslEndpointSES mandatory
Count of Severely Errored Seconds (SES) on this endpoint
since the xU was last restarted.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.10
hdsl2ShdslEndpointCRCanomalies mandatory
Count of CRC anomalies on this endpoint since the xU was
last restarted.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.11
hdsl2ShdslEndpointLOSWS mandatory
Count of Loss of Sync Word (LOSW) Seconds on this endpoint
since the xU was last restarted.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.12
hdsl2ShdslEndpointUAS mandatory
Count of Unavailable Seconds (UAS) on this endpoint since
the xU was last restarted.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.35.1.1.5.1.13
hdsl2ShdslEndpointCurr15MinReceivedBlks mandatory
Count of all encoded blocks received on this channel
within the mandatory 15 minute interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.14
hdsl2ShdslEndpointCurr15MinTransmittedBlks mandatory
Count of all encoded blocks transmitted on this channel
within the mandatory 15 minute interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.15
hdsl2ShdslEndpointCurr15MinCorrectedBlks mandatory
Count of all blocks received with errors that were
corrected on this channel within the mandatory 15 minute
interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.16
hdsl2ShdslEndpointCurr15MinUncorrectBlks mandatory
Count of all blocks received with uncorrectable errors
on this channel within the mandatory 15 minute interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.17
hdsl2ShdslEndpointCurr15MinTimeElapsed mandatory
Total elapsed seconds in the current 15-minute interval.
Integer32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.272.4.35.1.1.5.1.18
hdsl2ShdslEndpointCurr15MinES mandatory
Count of Errored Seconds (ES) in the current 15-minute
interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.19
hdsl2ShdslEndpointCurr15MinSES mandatory
Count of Severely Errored Seconds (SES) in the current
15-minute interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.20
hdsl2ShdslEndpointCurr15MinCRCanomalies mandatory
Count of CRC anomalies in the current 15-minute interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.21
hdsl2ShdslEndpointCurr15MinLOSWS mandatory
Count of Loss of Sync Word (LOSW) Seconds in the current
15-minute interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.22
hdsl2ShdslEndpointCurr15MinUAS mandatory
Count of Unavailable Seconds (UAS) in the current 15-minute
interval.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.23
hdsl2ShdslEndpointCurr1DayReceivedBlks mandatory
Count of all encoded blocks received on this channel
during the mandatory day as measured by
hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.24
hdsl2ShdslEndpointCurr1DayTransmittedBlks mandatory
Count of all encoded blocks transmitted on this channel
during the mandatory day as measured by
hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.25
hdsl2ShdslEndpointCurr1DayCorrectedBlks mandatory
Count of all blocks received with errors that were
corrected on this channel during the mandatory day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.26
hdsl2ShdslEndpointCurr1DayUncorrectBlks mandatory
Count of all blocks received with uncorrectable errors
on this channel during the mandatory day as measured by
hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.27
hdsl2ShdslEndpointCurr1DayTimeElapsed mandatory
Number of seconds that have elapsed since the beginning of
the current 1-day interval.
Integer32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.272.4.35.1.1.5.1.28
hdsl2ShdslEndpointCurr1DayES mandatory
Count of Errored Seconds (ES) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.29
hdsl2ShdslEndpointCurr1DaySES mandatory
Count of Severely Errored Seconds (SES) during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.30
hdsl2ShdslEndpointCurr1DayCRCanomalies mandatory
Count of CRC anomalies during the current day as measured
by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.31
hdsl2ShdslEndpointCurr1DayLOSWS mandatory
Count of Loss of Sync Word (LOSW) Seconds during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.32
hdsl2ShdslEndpointCurr1DayUAS mandatory
Count of Unavailable Seconds (UAS) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.35.1.1.5.1.33

hdsl2ShdslSpanConfProfileTable

table mandatory
.1.3.6.1.4.1.272.4.35.1.1.10 · 1 row entry · 7 columns
Open in standard view 
This table supports definitions of span configuration
profiles for SHDSL lines.  HDSL2 does not support these
configuration options.  This table MUST be maintained
in a persistent manner. Entries in this table are created by
the system only.
hdsl2ShdslSpanConfProfileEntry entry .1.3.6.1.4.1.272.4.35.1.1.10.1
Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profil…
Indexes
hdsl2ShdslSpanConfProfileName
Column Syntax OID
hdsl2ShdslSpanConfProfileName mandatory
This object is the unique index associated with this profile.
Entries in this table are referenced via the object
hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.272.4.35.1.1.10.1.1
hdsl2ShdslSpanConfWireInterface mandatory
This object configures the bonding mode of
the SHDSL Line.
twoWire(1) : no bonding is used
fourWire(2) : four-wire mode
fourWireStandard(3) : four-wire mode, disable globespan enhanced mode
fourWireIMA…
Enumerationr/w
Enumerated Values:
1twoWire
2fourWire
3fourWireStandard
4fourWireIMA
5sixWire
6sixWireIMA
7eightWire
8eightWireIMA
9not-used
10groupMember
11twoWireEFM
12fourWireEFM
13sixWireEFM
14eightWireEFM
 .1.3.6.1.4.1.272.4.35.1.1.10.1.2
hdsl2ShdslSpanConfMinLineRate mandatory
This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.10.1.3
hdsl2ShdslSpanConfMaxLineRate mandatory
This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considere…
Integer32r/w
Constraints:
range: 0-22784000
 .1.3.6.1.4.1.272.4.35.1.1.10.1.4
hdsl2ShdslSpanConfTransmissionMode mandatory
This object specifies the regional setting for the SHDSL
line:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B
Enumerationr/w
Enumerated Values:
1region1
2region2
3region1or2
 .1.3.6.1.4.1.272.4.35.1.1.10.1.6
hdsl2ShdslSpanConfWorstCaseTargetMarginDown mandatory
This object specifies the downstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
margin is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.272.4.35.1.1.10.1.10
hdsl2ShdslSpanConfWorstCaseTargetMarginUp mandatory
This object specifies the upstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.
Integer32r/w
Constraints:
range: -10-21
 .1.3.6.1.4.1.272.4.35.1.1.10.1.12