hdsl2ShdslEndpointConfMaxLineRate
BIANCA-BRICK-HDSL2SHDSL2-MIB ·
.1.3.6.1.4.1.272.4.35.1.1.4.1.7
Object
column
mandatory
r/w
Integer32
This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
Context
- MIB
- BIANCA-BRICK-HDSL2SHDSL2-MIB
- OID
.1.3.6.1.4.1.272.4.35.1.1.4.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- hdsl2ShdslEndpointConfEntry
- Table
- hdsl2ShdslEndpointConfTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-22784000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hdsl2ShdslEndpointConfIfIndex mandatory This object specifies the associated interface index of
this HDSL2/SHDSL line. | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.1 |
| hdsl2ShdslEndpointConfWorstCaseTargetMarginDown mandatory This object specifies the downstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
margi… | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.11 |
| hdsl2ShdslEndpointConfWorstCaseTargetMarginUp mandatory This object specifies the upstream worst case target SNR
margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
… | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.13 |
| hdsl2ShdslEndpointConfGroupId mandatory This object defines which wire-pairs belong to the same
M-pair group or IMA group. Members of the same group have
the same entry. | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.14 |
| hdsl2ShdslEndpointConfLineProbeEnable mandatory This object specifies the configuration of the PMMS
behavior:
auto - Line Probe is enabled if hdsl2ShdslEndpointConfMinLineRate
< hdsl2ShdslEndpointConfMaxLineRate.
disable -… | column | Enumeration | .1.3.6.1.4.1.272.4.35.1.1.4.1.15 |
| hdsl2ShdslEndpointConfLicenseUsage mandatory Shows which license type is currently used for this
SHDSL interface. | column | Enumeration | .1.3.6.1.4.1.272.4.35.1.1.4.1.16 |
| hdsl2ShdslEndpointConfPamMode mandatory This object specifies which modulation modes are allowed
for this wire pair.
16 - 16-TCPAM, used for Annex A,B and F,G.
32 - 32-TCPAM, used for Annex F,G only.
4, 8,… | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.17 |
| hdsl2ShdslEndpointConfTotalMinLineRate mandatory This object configures the minimum transmission rate
in bits-per-second (bps) for the associated SHDSL bundle.
The associated interfaces go up only when the sum of the
data rates… | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.18 |
| hdsl2ShdslEndpointConfMinWirePairs mandatory This object configures the minimum number of wire pairs
for the associated SHDSL bundle. The associated interfaces
go up only when at least the specified number of wire pairs
is c… | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.19 |
| hdsl2ShdslEndpointConfSide mandatory The side of the unit associated with this segment endpoint -
Network/Customer side - as per the Hdsl2ShdslUnitSide textual
convention. | column | Enumeration | .1.3.6.1.4.1.272.4.35.1.1.4.1.2 |
| hdsl2ShdslEndpointConfCapListStyle mandatory This object specifies the data format of the capability list,
that is exchanged during the G.994.1 handshake:
auto - automatic detection of the used capability list style.
old - o… | column | Enumeration | .1.3.6.1.4.1.272.4.35.1.1.4.1.20 |
| hdsl2ShdslEndpointConfWireInterface mandatory This object configures the bonding mode of
the SHDSL Line.
twoWire(1) : no bonding is used
fourWire(2) : four-wire mode
fourWireStandard(3) : four-wire mode, dis… | column | Enumeration | .1.3.6.1.4.1.272.4.35.1.1.4.1.5 |
| hdsl2ShdslEndpointConfMinLineRate mandatory This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(hdsl2ShdslSpan… | column | Integer32 | .1.3.6.1.4.1.272.4.35.1.1.4.1.6 |
| hdsl2ShdslEndpointConfTransmissionMode mandatory This object specifies the regional setting for the SHDSL
line:
region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B | column | Enumeration | .1.3.6.1.4.1.272.4.35.1.1.4.1.8 |