BIANCA-BRICK-E3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
23

e3IfTable

table mandatory
.1.3.6.1.4.1.272.4.42.1 · 1 row entry · 23 columns
Open in standard view 
The e3IfTable contains information relating to the 
interfaces available on the system. Each entry corresponds to
an available e3 interface. Entries cannot be added or 
	deleted by the user. 
          
Creating entries: Entries are created by the system
automatically when a new e3 module is installed.
          
Deleting entries: Entries are removed by the system
after the appropriate e3 module is removed.
e3IfEntry entry .1.3.6.1.4.1.272.4.42.1.1
Indexes
e3IfIndex
Column Syntax OID
e3IfIndex mandatory
The unique interface index of the e3/ds3 interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.272.4.42.1.1.1
e3IfType mandatory
The e3 physical interface type
off(1) interface is switched offline and the
line interface unit is switched off.
e3-unframed(2) Synchronous 34.368 MBit/s fullduplex,
with HDB3 line coding.
ds3-unframed(3) Synchron…
Enumerationr/w
Enumerated Values:
1off
2e3-unframed
3ds3-unframed
4sts1-unframed
 .1.3.6.1.4.1.272.4.42.1.1.2
e3IfClock mandatory
The clock source of the E3/DS3 connection.
intern(1) Your router provides the master clock
of the E3/DS3 connection.
extern(2) Your telephone company or the remote
DSU provides the master clock of the
E3/DS3 conn…
Enumerationr/w
Enumerated Values:
1intern
2extern
3extern-preferred
 .1.3.6.1.4.1.272.4.42.1.1.5
e3IfL2Mode mandatory
The X.75 layer 2 mode. This value has influence on the
HDLC address field (first byte of a HDCL frame). When
configured as DTE the address in a command frame is
0x01, when configured as DCE it is 0x03. For
response fram…
Enumerationr/w
Enumerated Values:
1dte
2dce
3auto
 .1.3.6.1.4.1.272.4.42.1.1.10
e3IfTestPattern mandatory
This variable configures which test pattern should be
transmitted.
normal(1) normal data, no test pattern is transmitted.
ones(2) Transmit unframed all ones.
alt-0-1(3) Transmit unframed 101010... pattern in
E3 mode …
Enumerationr/w
Enumerated Values:
1normal
2ones
3alt-0-1
4prbs
 .1.3.6.1.4.1.272.4.42.1.1.11
e3IfLoopback mandatory
This variable represents the loopback configuration
of the E3/DS3 interface.
noloop(1) No loopback is configured, normal data
is transmitted and received.
remoteloop(2) The received data is transmitted again.
Receiv…
Enumerationr/w
Enumerated Values:
1noloop
2remoteloop
3localloop
 .1.3.6.1.4.1.272.4.42.1.1.12
e3IfBundle mandatory
Index of the bundle to aggregate the interface and
channels of other interfaces
to one interface.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.272.4.42.1.1.14
e3IfCableLength mandatory
'short' should be used for a cable lenght less then 225 feet.
'long' should be used otherwise. With 'short' the Tx signal is
preattenutated similar to the attenuation of 225 feet
coaxial cable. The setting has no effe…
Enumerationr/w
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.272.4.42.1.1.15
e3IfCRCMode mandatory
The type of CRC checksum of the HDLC frames.
crc16(1) 16 Bit CRC
crc32(2) 32 Bit CRC
Enumerationr/w
Enumerated Values:
1crc16
2crc32
 .1.3.6.1.4.1.272.4.42.1.1.16
e3IfL1State mandatory
The e3 physical layer state
down(1) physical layer is inactive
up(2) physical layer is active
prbs(3) physical layer is active, a PRBS signal
is detected
nolicense(4) a license must be configured to activate
the i…
Enumeration
Enumerated Values:
1down
2up
3prbs
4nolicense
 .1.3.6.1.4.1.272.4.42.1.1.19
e3IfRxPackets mandatory
Count of received valid HDLC Frames.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.20
e3IfRxOctets mandatory
Count of received bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.21
e3IfTxPackets mandatory
Count of transmitted valid HDLC Frames.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.22
e3IfTxOctets mandatory
Count of transmitted bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.23
e3IfRxResets mandatory
Count of receiver resets. Under rare circumstances it
might be necessary to reset the receiver to work
properly.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.24
e3IfRxAborts mandatory
Count of receiver aborts. The sender of a frame can
indicate a frame as aborted with a special Abort
sequence.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.25
e3IfRxOverruns mandatory
Count of receiver overruns. If the e3 port is unable
to grant sufficiently soon/often the bus, the
RxFIFO may fill up. This leads to loss of data.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.26
e3IfRxCRCErrors mandatory
Count of corrupted frames. Errors due to interference
on the e3 cable.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.27
e3IfRxGiantFrames mandatory
Count of received frames with illegal framesize. This
can occur if a frame delimiter is destroyed.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.28
e3IfTxResets mandatory
Count of transmitter resets. Under rare circumstances
it might be necessary to reset the transmitter to work
properly.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.29
e3IfTxAborts mandatory
Count of transmitter aborts. While sending a frame it
might be necessary to indicate this frame as aborted. In
this case the receiver regards this frame as illegal.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.30
e3IfTxUnderruns mandatory
Count of transmitter underruns. The e3 data for the
e3 port is supplied too slowly.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.31
e3IfTxGiantFrames mandatory
Count of transmitted frames with illegal
framesize. This can occur if an upper module creates
packets with more than the maximum allowed packet size.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.272.4.42.1.1.32