ATI-8324SX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
17

switchInfoTable

table
.1.3.6.1.4.1.207.1.4.42.1.2 · 1 row entry · 11 columns
Open in standard view 
Table of descriptive and status information about
switches in this system.
switchInfoEntry entry .1.3.6.1.4.1.207.1.4.42.1.2.1
An entry in the table, containing information
about a single switch in this system.
Indexes
swUnitIndex
Column Syntax OID
swUnitIndex
This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.1.4.42.1.2.1.1
swMainBoardHwVer
Hardware version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.207.1.4.42.1.2.1.2
swMainBoardFwVer
Firmware version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.207.1.4.42.1.2.1.3
swAgentBoardHwVer
Hardware version of the agent board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.207.1.4.42.1.2.1.4
swAgentBoardFwVer
Firmware version of the agent board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.207.1.4.42.1.2.1.5
swAgentBoardPOSTCodeVer
POST code version of the agent board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.207.1.4.42.1.2.1.6
swPortNumber
The total port number of this switch (
including expansion slot).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.1.4.42.1.2.1.7
swPowerStatus
Indicates the switch using internalPower(1),
redundantPower(2) or both(3)
Enumeration
Enumerated Values:
1internalPower
2redundantPower
3internalAndRedundantPower
 .1.3.6.1.4.1.207.1.4.42.1.2.1.8
swExpansionSlot1
Type of expansion module in this switch slot 1.
Enumeration
Enumerated Values:
1hundredBaseFX2Port
2thousandBaseSX
3stackingModule4GB
4hundredBaseFX1Port
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8stackingModule2GB
9other
10notPresent
11tenHundredBaseT
12thousandBaseSXMtrj2Port
13thousandBaseSXSc2Port
14thousandBaseLXSc2Port
15hundredBaseFXMtrj2Port
16thousandBaseLXMtrj
17thousandBaseT2Port
18thousandBaseGBIC2Port
 .1.3.6.1.4.1.207.1.4.42.1.2.1.9
swExpansionSlot2
Type of expansion module in this switch slot 2.
Enumeration
Enumerated Values:
1hundredBaseFX2Port
2thousandBaseSX
3stackingModule4GB
4hundredBaseFX1Port
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8stackingModule2GB
9other
10notPresent
11tenHundredBaseT
12thousandBaseSXMtrj2Port
13thousandBaseSXSc2Port
14thousandBaseLXSc2Port
15hundredBaseFXMtrj2Port
16thousandBaseLXMtrj
17thousandBaseT2Port
18thousandBaseGBIC2Port
 .1.3.6.1.4.1.207.1.4.42.1.2.1.10
swRoleInSystem
Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.
Enumeration
Enumerated Values:
1master
2backupMaster
3slave
 .1.3.6.1.4.1.207.1.4.42.1.2.1.11

switchPortMgtTable

table
.1.3.6.1.4.1.207.1.4.42.2.1 · 1 row entry · 6 columns
Open in standard view 
Table of descriptive and status information about
configuration of each switch ports(including expansion slot)
in this system.
switchPortMgtEntry entry .1.3.6.1.4.1.207.1.4.42.2.1.1
An entry in the table, containing information
about configuration in one switch port of the switch.
Indexes
swUnitIndex swPortMgtIndex
Column Syntax OID
swPortMgtIndex
This object identifies the port within the switch
for which this entry contains information.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.1.4.42.2.1.1.1
swPortMgtPortType
Indicates the port type.
Enumeration
Enumerated Values:
1hundredBaseTX
2hundredBaseFX
3thousandBaseSX
4thousandBaseLX
5thousandBaseT
6thousandBaseGBIC
7other
 .1.3.6.1.4.1.207.1.4.42.2.1.1.2
swPortMgtSpeedDpxAdmin
Set the port speed and duplex mode as follows:
halfDuplex10(1) - 10Mbps and half duplex mode
fullDuplex10(2) - 10Mbps and full duplex mode
halfDuplex100(3) - 100Mbps and half duplex mode
fullDuplex100(4) - 100…
Enumerationr/w
Enumerated Values:
1halfDuplex10
2fullDuplex10
3halfDuplex100
4fullDuplex100
5halfDuplex1000
6fullDuplex1000
7autoNegotiation
 .1.3.6.1.4.1.207.1.4.42.2.1.1.3
swPortMgtSpeedDpxInUse
The operating speed and duplex mode of the
switched port.
Enumeration
Enumerated Values:
1halfDuplex10
2fullDuplex10
3halfDuplex100
4fullDuplex100
5halfDuplex1000
6fullDuplex1000
 .1.3.6.1.4.1.207.1.4.42.2.1.1.4
swPortMgtFlowCtrlAdmin
(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3backPressure
4dot3xFlowControl
 .1.3.6.1.4.1.207.1.4.42.2.1.1.5
swPortMgtFlowCtrlInUse
(1) BackPressure flow control machanism is used.
(2) IEEE 802.3 flow control machanism is used.
(3) Flow control mechanism is disabled.
Enumeration
Enumerated Values:
1backPressure
2dot3xFlowControl
3none
 .1.3.6.1.4.1.207.1.4.42.2.1.1.6