ASAM-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
48

asamSystemLicenseMgmtTable

table
.1.3.6.1.4.1.637.61.1.9.17.2 · 1 row entry · 2 columns
Open in standard view 
The license key management table.
asamSystemLicenseMgmtEntry entry .1.3.6.1.4.1.637.61.1.9.17.2.1
An entry in the asamSystemLicenseMgmtTable.
Indexes
No indexes recorded
Column Syntax OID
licenseFeatureIndex
This object is used by the asamSystemLicenseMgmtTable to identify a
row of this table. Each row corresponds to a system feature that is
monitored to support license management at the manager.
Following integer values ar…
Integer32
Enumerated Values:
1start
2stop
3proceeding
4idle
5not-operational
 .1.3.6.1.4.1.637.61.1.9.17.2.1.1
licenseCounter
The counter associated with the monitoring of the feature that
corresponds to the licenseFeatureIndex value.

1. For ADSL2+, the counter indicates the number of XDSL lines for which
an ADSL2+ operational …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.9.17.2.1.2

cpuLoadTable

table
.1.3.6.1.4.1.637.61.1.9.29.1 · 1 row entry · 5 columns
Open in standard view 
The CPU load monitor table.
ALCATEL NOTE:
   TABLESIZE:     max nmbr of slots
cpuLoadEntry entry .1.3.6.1.4.1.637.61.1.9.29.1.1
An entry in the cpuLoadTable. The index of the entry is slotId.
An entry represents the CPU load of the board in the slot.
The CPU load includes detail value and average value respectively.
The slot can be NT slot or LT…
Indexes
No indexes recorded
Column Syntax OID
slotId
the slotId has the same value as eqptSlotId of ASAM-EQUIP-MIB.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: 0
…
Integer32 .1.3.6.1.4.1.637.61.1.9.29.1.1.1
startMonitorTime
The start timestamp of CPU load monitor is the network
time in seconds.
It indicates the start time of last 3 minutes or less monitoring.
The startMonitorTime is the time at which the last CPU load
detail & average was …
ASAM-TC-MIBNetworkTimeInSeconds
Textual Convention: ASAM-TC-MIBNetworkTimeInSeconds Integer32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.9.29.1.1.2
cpuLoadDetail
The cpuLoadDetail object represents the CPU load percent value
(x100%) in detail for 180 measurement points.
The length of this object is always 180 octets. One octet represents
one CPU load value of one measurement. On…
OctetString .1.3.6.1.4.1.637.61.1.9.29.1.1.3
cpuLoadAverage
The average value of CPU load. It is percent value (x100%).
It is the average of detail CPU load value.
One sample is generated for each second during CPU load measurement
time. The maximum measurement time is 180 secon…
RFC1155-SMIGauge
Constraints:
range: 1-20
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.9.29.1.1.4
operateStatus
The operate status for start/stop CPU load monitoring operation.
The maximum measurement time is 180 seconds.
One sample is generated for a second.
The maximum sample number is 180. Only the latest 180 sample values
are…
Enumerationr/w .1.3.6.1.4.1.637.61.1.9.29.1.1.5

memUsageTable

table
.1.3.6.1.4.1.637.61.1.9.29.2 · 1 row entry · 2 columns
Open in standard view 
The memory usage monitor table.
memUsageEntry entry .1.3.6.1.4.1.637.61.1.9.29.2.1
An entry in the memUsageTable. The index of the entry is slotId.
An entry represents the memory usage of the board in the slot.
The memory usage includes total size and used size respectively.
The solt can be NT slot or…
Indexes
No indexes recorded
Column Syntax OID
totalMemSize
The total memory size on board. It just indicates the size of
total semi and dynamical memory.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: Mbyte
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.9.29.2.1.1
memAbsoluteUsage
The used memory size in absolute value. It indicates total used
size of semi and dynamical memory.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: Mbyte
RFC1155-SMIGauge
Constraints:
range: 1-1
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.9.29.2.1.2

peripheralMgntMacFilterTable

table
.1.3.6.1.4.1.637.61.1.9.36 · 1 row entry · 3 columns
Open in standard view 
The peripheral management mac filter table.
          
For enhanced security in remote cabinets, it is possible to restrict
allowed destination MAC addresses in upstream Ethernet traffic on the
peripheral port to a white-list of 20 allowed MAC address ranges.
          
Each entry of this list consists of an Original manufacturer Unique
Identifier (OUI) value, covering the 3 Most Significant Bytes (MSB)
of the public MAC address.
          
A begin and end value of a single consecutive range of MAC addresses
for the above OUI covers at maximum the full 3 Least Significant
Bytes (LSB) of the public MAC address.
          
  ALCATEL NOTE:
       TABLESIZE:  20
       DESCR:      NA
peripheralMgntMacFilterEntry entry .1.3.6.1.4.1.637.61.1.9.36.1
A filter entry in the management mac filter table.
On the NRCD-B the filter is a filter on the destination mac address of
the frames received over this port.
On other cards/systems, the
filter is a filter on the source …
Indexes
No indexes recorded
Column Syntax OID
peripheralMgntMacFilterIndex
The index for the peripheralMgntMacFilter table. A maximum of 20 mac
filters is supported.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: NA
Integer32 .1.3.6.1.4.1.637.61.1.9.36.1.1
peripheralMgntMacFilterMacRangeFirst
Specifies the first MAC address of the allowed range.
Default value 00.00.00.00.00.00

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -
r/w .1.3.6.1.4.1.637.61.1.9.36.1.2
peripheralMgntMacFilterMacRangeLast
Specifies the last MAC address of the allowed range.
At least the OUI part should match the OUI of the
peripheralMgntMacFilterMacRangeFirst MAC address.
Default value 00.00.00.00.00.00

ALCATEL NOTE:
SU…
r/w .1.3.6.1.4.1.637.61.1.9.36.1.3

asamTechSupportActionTable

table
.1.3.6.1.4.1.637.61.1.9.53.4 · 1 row entry · 7 columns
Open in standard view 
The TechSupport Action Table
Use this table to launch On Demand Tech Support File generation
asamTechSupportActionEntry entry .1.3.6.1.4.1.637.61.1.9.53.4.1
An entry in the asamTechSupportSessionTable.
Indexes
No indexes recorded
Column Syntax OID
asamTechSupportActionId
The index of the Tech Support Action Table Session
Entry with id 1 exists and is to be used for creating
new tech support on demand requets.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: …
Integer32r/w .1.3.6.1.4.1.637.61.1.9.53.4.1.1
asamTechSupportActionEvent
Indicate which action to trigger.
The Following scenarios are possible:
- Generate an On Demand TS File
A set with the below fields specified will generate an on-demand
Tech Support file generation for a dedicated b…
Enumerationr/w .1.3.6.1.4.1.637.61.1.9.53.4.1.2
asamTechSupportActionSessionId
Specify this value in case a dedicated session ID is
to be used for this request. To find a good unique session-id, a read
can be done to asamTechSupportOnDemandFreeSessionId. If a value of 0 is
given, then the system w…
TechSupportSessionIdr/w
Textual Convention: TechSupportSessionId Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.637.61.1.9.53.4.1.3
asamTechSupportActionType
The type corresponding to the stored or requested Tech Support File.
- crashLog : type for auto generated crashlog TS files for boards
- boardOnDemand : type for requesting an on-demand TS file for boards
- ifIndexOnDem…
TechSupportSessionTyper/w
Textual Convention: TechSupportSessionType Enumeration
Type Values:
1crashLog
2boardOnDemand
3ifIndexOnDemand
 .1.3.6.1.4.1.637.61.1.9.53.4.1.4
asamTechSupportActionObject
Identifier that indicates for which object that the Tech Support File was
generated or requested.
For a boardOnDemand(2) request, the asamTechSupportSessionObject needs to be set to
the Equipment Slot Id of the board fo…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.9.53.4.1.5
asamTechSupportActionServerIP
The IP address of the server where the Tech Support File will be uploaded to.
or 0.0.0.0 in case the file needs to be stored locally on the node.

Currently only a value of 0 is accepted as input.
This fie…
RFC1155-SMIIpAddressr/w
Constraints:
range: 1-255
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.637.61.1.9.53.4.1.6
asamTechSupportActionFile
The filename that identifies the Tech Support File.
2 restrictions apply
- For storing locally on the Node
identified via asamTechSupportActionServerIP = 0
size of asamTechSupportActionFile is max 13 characters
…
OctetStringr/w
Enumerated Values:
1busy
2failed
3done
 .1.3.6.1.4.1.637.61.1.9.53.4.1.7

asamTechSupportSessionTable

table
.1.3.6.1.4.1.637.61.1.9.53.5 · 1 row entry · 9 columns
Open in standard view 
The TechSupport Session Table
asamTechSupportSessionEntry entry .1.3.6.1.4.1.637.61.1.9.53.5.1
An entry in the asamTechSupportSessionTable.
Indexes
No indexes recorded
Column Syntax OID
asamTechSupportSessionId
A unique value to identify a Tech Support Session

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: 0..65535
PERSIST: YES DEFVALUE: NA UNITS: -
TechSupportSessionId
Textual Convention: TechSupportSessionId Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.637.61.1.9.53.5.1.1
asamTechSupportSessionType
The type corresponding to the stored or requested Tech Support File.
- crashLog : type for auto generated crashlog TS files for boards
- boardOnDemand : type for requesting an on-demand TS file for boards
- ifIndexOnDem…
TechSupportSessionType
Textual Convention: TechSupportSessionType Enumeration
Type Values:
1crashLog
2boardOnDemand
3ifIndexOnDemand
 .1.3.6.1.4.1.637.61.1.9.53.5.1.2
asamTechSupportSessionObject
Identifier that indicates for which object that the Tech Support File was
generated or requested.
2 cases exist:
- asamTechSupportSessionObject = slotId
for asamTechSupportSessionType crashLog or boardOnDemand
…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.9.53.5.1.3
asamTechSupportSessionServerIP
The IP address of the server where the Tech Support File will be uploaded to.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: see above
PERSIST: YES DEFVALUE: NA UNITS: -
RFC1155-SMIIpAddress
Constraints:
range: -780-840
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.637.61.1.9.53.5.1.4
asamTechSupportSessionFile
The filename that identifies the Tech Support File.
format
- filename [max 13 characters]
- fileserver:path/filename [ max 255 chars]

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: see a…
OctetString
Enumerated Values:
0sunday
1monday
2tuesday
3wednesday
4thursday
5friday
6saturday
 .1.3.6.1.4.1.637.61.1.9.53.5.1.5
asamTechSupportSessionStatus
This object shows the status for a session-entry.
The initial status is busy(1).
When the generation completes successfully, then it goes to done(3).
In case of an error, then it goes to failed(2) state and the failure
…
Enumeration
Enumerated Values:
0first
1second
2third
3fourth
4last
 .1.3.6.1.4.1.637.61.1.9.53.5.1.6
asamTechSupportSessionError
This object shows error information for a failed session-entry.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: see above
PERSIST: YES DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0january
1february
2march
3april
4may
5june
6july
7august
8september
9october
10november
11december
 .1.3.6.1.4.1.637.61.1.9.53.5.1.7
asamTechSupportSessionSize
This object shows the size of the collected TS file

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: see above
PERSIST: YES DEFVALUE: NA UNITS: -
Integer32
Constraints:
range: 0-23
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.9.53.5.1.8
asamTechSupportSessionTime
Shows the Time in seconds from 1900 when the TS-entry was
collected.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: see above
PERSIST: NO DEFVALUE: NA UNITS: -
ASAM-TC-MIBNetworkTimeInSeconds
Constraints:
range: 0-59
Textual Convention: ASAM-TC-MIBNetworkTimeInSeconds Integer32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.9.53.5.1.9

asamDstRecurringConfTable

table
.1.3.6.1.4.1.637.61.1.9.62 · 1 row entry · 14 columns
Open in standard view 
The asamDstRecurringConfTable has an entry for each daylight saving time
zone information with the specified week and weekday repeatedly.
ALCATEL NOTE:
    SUPPORT: YES   INSRVMOD: NA        RANGE: NA
    PERSIST: YES   DEFVALUE: NA        UNITS: NA
asamDstRecurringConfEntry entry .1.3.6.1.4.1.637.61.1.9.62.1
Each row entry contains information about a daylight saving time
zone.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA
Indexes
No indexes recorded
Column Syntax OID
asamDstRecurringZoneIndex
This represents a daylight saving time zone. This index must be unique
amongst the table entries.
Because snmp index can't recognise negative integer,so we shift the zone range to [0...1620] as a workaround
ALCATEL NOTE…
Integer32
Enumerated Values:
0january
1february
2march
3april
4may
5june
6july
7august
8september
9october
10november
11december
 .1.3.6.1.4.1.637.61.1.9.62.1.1
asamDstConfStartWeekDay
The starting day of the week when the summer time will
take effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..6
PERSIST: YES DEFVALUE: sunday(0) UNITS: NA
Enumerationr/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.637.61.1.9.62.1.2
asamDstConfStartWeek
The starting week of the month when the summer time will
take effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..4
PERSIST: YES DEFVALUE: first(0) UNITS: NA
Enumerationr/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.637.61.1.9.62.1.3
asamDstConfStartMonth
The starting month of the year when the summer time will
take effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..11
PERSIST: YES DEFVALUE: january(0) UNITS: NA
Enumerationr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.637.61.1.9.62.1.4
asamDstConfStartHour
The hour at which the summer time will take effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..23
PERSIST: YES DEFVALUE: 0 UNITS: hours
Integer32r/w .1.3.6.1.4.1.637.61.1.9.62.1.5
asamDstConfStartMinute
The number of minutes after the hours defined by
asamDstConfStartHour when the summer time will
take effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..59
PERSIST: YES DEFVALUE: 0 UNI…
Integer32r/w .1.3.6.1.4.1.637.61.1.9.62.1.6
asamDstConfEndWeekDay
The day of the week when the summer time setting will
end.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..6
PERSIST: YES DEFVALUE: sunday(0) UNITS: NA
Enumerationr/w .1.3.6.1.4.1.637.61.1.9.62.1.7
asamDstConfEndWeek
The week of the month when the summer time setting will
end.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..4
PERSIST: YES DEFVALUE: first(0) UNITS: NA
Enumerationr/w .1.3.6.1.4.1.637.61.1.9.62.1.8
asamDstConfEndMonth
The month of the year when the summer time setting will
end.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..11
PERSIST: YES DEFVALUE: january(0) UNITS: NA
Enumerationr/w
Constraints:
range: -780-840
 .1.3.6.1.4.1.637.61.1.9.62.1.9
asamDstConfEndHour
The hour at which the summer time will stop taking effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..23
PERSIST: YES DEFVALUE: 0 UNITS: hours
Integer32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.637.61.1.9.62.1.10
asamDstConfEndMinute
The number of minutes after the hours defined by
asamDstConfEndHour when the summer time will
stop taking effect.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..59
PERSIST: YES DEFVALUE: 0 …
Integer32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.637.61.1.9.62.1.11
asamDstRecurringAdjustment
The number of minutes that will be added to the time
when daylight saving time takes effect. The same number of minutes
will be subtracted from the time when the daylight saving time ends.
ALCATEL NOTE:
SUPPORT: YES…
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.637.61.1.9.62.1.12
asamDstRecurringIsAffectedSrc
The value of asamDstRecurringIsAffectedSrc indicates whether this
configuration entry match the OLT timezone.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: 2 …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.637.61.1.9.62.1.13
asamDstRecurringRowStatus
The row status used to create and delete rows in this table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.637.61.1.9.62.1.14

asamDstDateConfTable

table
.1.3.6.1.4.1.637.61.1.9.63 · 1 row entry · 6 columns
Open in standard view 
The asamDstDateConfTable has an entry for each daylight saving time
zone information with the specified with the corresponding specified days some year.
ALCATEL NOTE:
     SUPPORT: YES   INSRVMOD: NA        RANGE: NA
     PERSIST: YES   DEFVALUE: NA        UNITS: NA
asamDstDateConfEntry entry .1.3.6.1.4.1.637.61.1.9.63.1
Each row entry contains information about a daylight saving time
zone.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA
Indexes
No indexes recorded
Column Syntax OID
asamDstDateZoneIndex
This represents a daylight saving time zone. This index must be unique
amongst the table entries.
Because snmp index can't recognise negative integer,so we shift the zone range to [0...1620] as a workaround
ALCATEL NOTE…
Integer32 .1.3.6.1.4.1.637.61.1.9.63.1.1
asamDstConfStartDate
The time when the daylight saving time will
take effect means the number of standard seconds since
0h on 1 January 1900.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295
PERSIST: YES DEFVA…
Unsigned32r/w .1.3.6.1.4.1.637.61.1.9.63.1.2
asamDstConfEndDate
The time when daylight saving time will end means the
number of standard seconds since0h on 1 January 1900.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4294967295
PERSIST: YES DEFVALUE: NA …
Unsigned32r/w .1.3.6.1.4.1.637.61.1.9.63.1.3
asamDstDateAdjustment
The number of minutes that will be added to the time
when daylight saving time takes effect. The same number of minutes
will be subtracted from the time when the daylight saving time ends.
ALCATEL NOTE:
SUPPORT: YES…
Integer32r/w .1.3.6.1.4.1.637.61.1.9.63.1.4
asamDstDateIsAffectedSrc
The value of asamDstDateIsAffectedSrc indicates whether this
configuration entry match the OLT timezone.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: 2 UNITS: …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.637.61.1.9.63.1.5
asamDstDateRowStatus
The row status used to create and delete rows in this table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: YES DEFVALUE: NA UNITS: NA
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.637.61.1.9.63.1.6