ARICENT-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
70

dot1qFutureVlanPortTable

table
.1.3.6.1.4.1.2076.65.1.10 · 1 row entry · 17 columns
Open in standard view 
Table containing the port type information.
dot1qFutureVlanPortEntry entry .1.3.6.1.4.1.2076.65.1.10.1
Entry indicating the type of the port.
Indexes
dot1qFutureVlanPort
Column Syntax OID
dot1qFutureVlanPort
The port number of the port for which this entry applies.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.65.1.10.1.1
dot1qFutureVlanPortType
The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added as
member of all the existing VLANs an…
Enumerationr/w
Enumerated Values:
1accessPort
2trunkPort
3hybridPort
 .1.3.6.1.4.1.2076.65.1.10.1.2
dot1qFutureVlanPortMacBasedClassification
This Object is used to explicitly enable/disable the MAC based classification
on port. This can be independently set without
any dependency in available configuration of
dot1qFutureVlanMacBasedOnAllPorts.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.10.1.3
dot1qFutureVlanPortPortProtoBasedClassification
This Object is used to explicitly enable/disable the port and protocol
classification on port. This can be independently set without
any dependency in available configuration of
dot1qFutureVlanPortProtoBasedOnAllPorts.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.10.1.4
dot1qFutureVlanFilteringUtilityCriteria
Based on this object, learning on a port is decided.

If default filtering utility criteria is selected on a port, then
learning of source MAC from a received packet on that port will be
done only if there…
Enumerationr/w
Enumerated Values:
1default
2enhanced
 .1.3.6.1.4.1.2076.65.1.10.1.5
dot1qFutureVlanPortProtected
The Split Horizon property of the port. If set to true, frames that
are received on any other port that has the same property set to true,
will not be forwarded on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.65.1.10.1.6
dot1qFutureVlanPortSubnetBasedClassification
This Object is used to explicitly enable/disable the subnet based VLAN Classification
on port. This can be independently set without any dependency in
available configuration of dot1qFutureVlanSubnetBasedOnAllPorts. T…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.10.1.7
dot1qFutureVlanPortUnicastMacLearning
A truth value indicating the unicast MAC learning enabled/disabled
status for this port.
When Unicast Mac Learning is disabled, no unicast MAC entry will be
learnt on this port.
When MAC learning is enabled, unicast M…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.10.1.8
dot1qFutureVlanPortIngressEtherType
In Customer Bridge mode, this object indicates the primary C-VLAN tag ether
type used for the packets received on this port. Packets received on a port
are considered tagged, when the packet ether type matches with th…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.65.1.10.1.9
dot1qFutureVlanPortEgressEtherType
In Customer Bridge Mode, this object indicates the ether type of
the C-VLAN tag that has to be applied for all the outgoing packets on
this port. If a valid value is in this object, all the packets which
are outgoing on…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.65.1.10.1.10
dot1qFutureVlanPortEgressTPIDType
This object defines the Egress TPID type for a Port.
If the value is portbased(1) the egress TPID of the packet
is selected from Egress Port Table.

When the value is vlanbased(2), the Egress TPID is selec…
Enumerationr/w
Enumerated Values:
1portbased
2vlanbased
 .1.3.6.1.4.1.2076.65.1.10.1.11
dot1qFutureVlanPortAllowableTPID1
This object indicates the secondary ether type that is allowable for a port.
The configurable values for this object are either 0x8100 or 0x88a8.

Setting this MIB object is applicable only for hardware.
…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.65.1.10.1.12
dot1qFutureVlanPortAllowableTPID2
This object indicates the standard ether type that is allowable for a port.
The configurable value for this object is Q-in-Q EtherType [0x9100].
Setting this MIB object is applicable only for hardware.

Wh…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.65.1.10.1.13
dot1qFutureVlanPortAllowableTPID3
This object indicates the additional user defined ether type that is allowable for a port.
The value for this object is set by the dot1qFutureVlanUserDefinedTPID MIB.

Setting this MIB object is applicable…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.65.1.10.1.14
dot1qFutureVlanPortUnicastMacSecType
This object identifies the MA Table Address Type for this port

sav - security is sav, strict is FALSE
Only unknown MAC is treated as violation on all security configured ports.
shv - security …
Enumerationr/w
Enumerated Values:
1sav
2shv
3off
 .1.3.6.1.4.1.2076.65.1.10.1.15
dot1qFuturePortPacketReflectionStatus
Port Packet Reflection feature allows switching of packets received
on an ingress port back on the same port on which packet was received,
if the MAC Destination Address is on the same port. The default behavior
of th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.65.1.10.1.16
dot1qFutureVlanPortProtectedStatic
The static Split Horizon property of the port. If set to true, frames
that are received on any other port that has the same property set to
true will not be forwarded on this port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.65.1.10.1.17

dot1qFutureVlanPortMacMapTable

table
.1.3.6.1.4.1.2076.65.1.11 · 1 row entry · 5 columns
Open in standard view 
A table that contains information on VLAN-MAC address 
mapping.
dot1qFutureVlanPortMacMapEntry entry .1.3.6.1.4.1.2076.65.1.11.1
This object specifies the entry that contains VLAN-MAC address mapping.
Indexes
dot1qFutureVlanPort dot1qFutureVlanPortMacMapAddr
Column Syntax OID
dot1qFutureVlanPortMacMapAddr
This object specifies the MAC address for which the VLAN mapping is
present in the entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.65.1.11.1.1
dot1qFutureVlanPortMacMapVid
This object specifies the VLAN to which the MAC address of this entry is
mapped to.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.65.1.11.1.2
dot1qFutureVlanPortMacMapName
This object specifies the name given to the mac-VLAN entry.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.65.1.11.1.3
dot1qFutureVlanPortMacMapMcastBcastOption
Configurable option for discarding/allowing Multicast/Broadcast untagged
frames. The value allow (1) indicates that Multicast/Broadcast frames
with source MAC address as in the MAC VLAN entry will be dropped if MAC
base…
Enumerationr/w
Enumerated Values:
1allow
2suppress
 .1.3.6.1.4.1.2076.65.1.11.1.4
dot1qFutureVlanPortMacMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.65.1.11.1.5

dot1qFutureVlanFidMapTable

table
.1.3.6.1.4.1.2076.65.1.12 · 1 row entry · 2 columns
Open in standard view 
This table contains information about the filtering database identifier
(FID) used by VLAN's to make forwarding decisions. VLAN's can be mapped 
to use the same FID to share filtering information among them. This will
cause the mapped VLAN's to operate in shared VLAN learning (SVL) mode.
VLAN's mapped to a unique FID will operate in independent VLAN learning
mode (IVL). A SET operation on this table is allowed only when 
dot1qFutureVlanLearningMode is hybrid. By default, all VLAN's will be 
mapped to the FID equal to their VLAN id when 
dot1qFutureVlanHybridTypeDefault is IVL. If the value of 
dot1qFutureVlanHybridTypeDefault is SVL, all VLAN's are mapped to 
filtering database id 1.
dot1qFutureVlanFidMapEntry entry .1.3.6.1.4.1.2076.65.1.12.1
Entry mapping VlanId to Filtering database id.
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanIndex
VLAN ID for which filtering database information is available.
Unsigned32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.65.1.12.1.1
dot1qFutureVlanFid
This object specifies the filtering database id (FID) that will be used
by the VLAN.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.65.1.12.1.2

dot1qFutureVlanCounterTable

table
.1.3.6.1.4.1.2076.65.1.16 · 1 row entry · 12 columns
Open in standard view 
The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN.
dot1qFutureVlanCounterEntry entry .1.3.6.1.4.1.2076.65.1.16.1
This object specifies the entry contains the VLAN statistics.
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanCounterRxUcast
This object specifies the number of unicast packets received in
this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.1
dot1qFutureVlanCounterRxMcastBcast
This object specifies the number of multicast/broadcast packets
received in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.2
dot1qFutureVlanCounterTxUnknUcast
This object specifies the number of unknown unicast packets
flooded in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.3
dot1qFutureVlanCounterTxUcast
This object specifies the number of known unicast packets forwarded
in this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.4
dot1qFutureVlanCounterTxBcast
This object specifies the number of broadcast packets forwarded in
this VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.5
dot1qFutureVlanCounterRxFrames
This object displays the total number of unicast, multicast and
broadcast packets received in the VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.6
dot1qFutureVlanCounterRxBytes
This object displays the total number of unicast, multicast and broadcast bytes received
in the VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.7
dot1qFutureVlanCounterTxFrames
This object displays the total number of unicast, multicast and broadcast packets transmitted
by the VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.8
dot1qFutureVlanCounterTxBytes
This object displays the total number of unicast, multicast and broadcast bytes transmitted
by the VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.9
dot1qFutureVlanCounterDiscardFrames
This object displays the number of packets dropped by the VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.10
dot1qFutureVlanCounterDiscardBytes
This object displays the number of bytes dropped by the VLAN.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.16.1.11
dot1qFutureVlanCounterStatus
A truth value indicating the statistics collection is enabled/disabled
for this VLAN.

When statistics collection is set to disabled, VLAN stops collecting
statistics on this specific VLAN.
When statistics…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.16.1.12

dot1qFutureVlanUnicastMacControlTable

table
.1.3.6.1.4.1.2076.65.1.17 · 1 row entry · 4 columns
Open in standard view 
A table containing per VLAN Unicast MAC address control information. 
The control information includes the status of unicast MAC address 
learning as well as restricting the number of unique entries learnt to 
a specified limit for the specified VLAN.
dot1qFutureVlanUnicastMacControlEntry entry .1.3.6.1.4.1.2076.65.1.17.1
Information controlling the number of distinct unicast MAC addresses
that can be learnt by a VLAN depending on whether learning is enabled
or disabled for the specified VLAN.
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanUnicastMacLimit
The limiting value on the number of distinct unicast MAC addresses
learnt in a VLAN. The lower limit and upper limit value that
can be SET for this object is determined by the underlying hardware.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2076.65.1.17.1.1
dot1qFutureVlanAdminMacLearningStatus
A truth value used to configure the unicast MAC learning admin status of
the VLAN to be enabled (1) or disabled (2) or default (3).
Configuring this object to default behavior is governed by value
configured for dot1qF…
MacLearningStatusr/w
Textual Convention: MacLearningStatus Enumeration
Type Values:
1enabled
2disabled
3default
 .1.3.6.1.4.1.2076.65.1.17.1.2
dot1qFutureVlanOperMacLearningStatus
A truth value indicating the unicast MAC learning enabled/disabled.
Operational status for the specified VLAN.
If the VLAN does not have any member port, then the MAC Learning
Status for this VLAN will always be disable…
EnabledStatus
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.17.1.3
dot1qFutureVlanPortFdbFlush
If this object is set as 'true', then all the dynamically
learnt MAC addresses in specified VLAN will be removed. After flush,
this object is set to 'false'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.65.1.17.1.4

dot1qFutureVlanTpFdbTable

table
.1.3.6.1.4.1.2076.65.1.19 · 1 row entry · 3 columns
Open in standard view 
An extension to the dot1qTpFdbTable contains information
about unicast entries only learned via pseudowire
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame.
dot1qFutureVlanTpFdbEntry entry .1.3.6.1.4.1.2076.65.1.19.1
Information about the pseudowire on which MAC address was
learned
Indexes
No indexes recorded
Column Syntax OID
dot1qFutureVlanTpFdbPw
Either the value '0', or the pseudowire number on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the entry was
le…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.1.19.1.1
dot1qTpOldFdbPort
This object is useful for generating the source relearning trap.
When a get is performed on this object, it returns the value of
zero(0), so that ISS walk doesn't break. It indicates the port
through which the MAC addr…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.65.1.19.1.2
dot1qFutureConnectionIdentifier
This object is to associate the backbone MAC address of the peer
backbone edge bridge with customer MAC addresses that can be reached
through the peer backbone edge bridge.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.65.1.19.1.3

dot1qFutureVlanWildCardTable

table
.1.3.6.1.4.1.2076.65.1.20 · 1 row entry · 3 columns
Open in standard view 
Wild card VLAN (Id : 0xFFF) static filtering information 
will be used for all VLANs for which there is no specific 
static filtering exists in dot1qStaticUnicastTable or 
dot1qStaticMulticastTable.
dot1qFutureVlanWildCardEntry entry .1.3.6.1.4.1.2076.65.1.20.1
WildCard VLAN filtering information configured into device by
management specifying set of ports to which frames received
from any port and for any VLAN containing this wild card MAC
address as destination address and f…
Indexes
dot1qFutureVlanWildCardMacAddress
Column Syntax OID
dot1qFutureVlanWildCardMacAddress
The destination MAC address in a frame to which this entry's
filtering information applies. This object must take the
value of a Unicast, Multicast or Broadcast address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.65.1.20.1.1
dot1qFutureVlanWildCardEgressPorts
The set of ports to which frames received from a specific port
and destined for dot1qFutureVlanWildCardMacAddress address must
be forwarded, if there is no specific static filtering entry
exist for this MAC.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.65.1.20.1.2
dot1qFutureVlanWildCardRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.65.1.20.1.3

dot1qFutureStaticUnicastExtnTable

table
.1.3.6.1.4.1.2076.65.1.21 · 1 row entry · 1 columns
Open in standard view 
A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only.
dot1qFutureStaticUnicastExtnEntry entry .1.3.6.1.4.1.2076.65.1.21.1
Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…
Indexes
No indexes recorded
Column Syntax OID
dot1qFutureStaticConnectionIdentifier
This object is to associate the backbone MAC address of the peer
backbone edge bridge with customer MAC addresses that can be reached
through the peer backbone edge bridge.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.65.1.21.1.1

dot1qFutureVlanPortSubnetMapTable

table
.1.3.6.1.4.1.2076.65.1.25 · 1 row entry · 4 columns
Open in standard view 
Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
In case of BCM, the dot1qFutureVlanPort index should always be 0 since
BCM supports Subnet based VLAN globally (not on per port).
dot1qFutureVlanPortSubnetMapEntry entry .1.3.6.1.4.1.2076.65.1.25.1
This object specifies an entry that contains VLAN-Subnet address mapping.
Indexes
dot1qFutureVlanPort dot1qFutureVlanPortSubnetMapAddr
Column Syntax OID
dot1qFutureVlanPortSubnetMapAddr
This object specifies the the source IP-Subnet address for which the VLAN
mapping is present in the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.65.1.25.1.1
dot1qFutureVlanPortSubnetMapVid
This object specifies the VLAN to which the source IP-Subnet address of
this entry is mapped to.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.65.1.25.1.2
dot1qFutureVlanPortSubnetMapARPOption
Configurable option for discarding/allowing ARP Untagged frames on
the VLAN. The value allow (1) indicates that ARP frames with source
IP-subnet address matching the dot1qFutureVlanPortSubnetMapEntry
will be classifie…
Enumerationr/w
Enumerated Values:
1allow
2suppress
 .1.3.6.1.4.1.2076.65.1.25.1.3
dot1qFutureVlanPortSubnetMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.65.1.25.1.4

dot1qFutureStVlanExtTable

table
.1.3.6.1.4.1.2076.65.1.29 · 1 row entry · 3 columns
Open in standard view 
An extension to dot1qVlanStaticTable VLAN table.
dot1qFutureStVlanExtEntry entry .1.3.6.1.4.1.2076.65.1.29.1
This object specifies each entry which specifies the VLAN
configuration done for a given VLAN.
Indexes
No indexes recorded
Column Syntax OID
dot1qFutureStVlanType
Indicates the VLAN type of the static VLAN.
This object is being retained for backward compatibility of OID's
of the remaining objects in this table.
Enumeration
Enumerated Values:
1normal
 .1.3.6.1.4.1.2076.65.1.29.1.1
dot1qFutureStVlanVid
This object is being retained for backward compatibility of OID's of the
remaining objects in this table.
Q-BRIDGE-MIBVlanIdOrNone
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2076.65.1.29.1.2
dot1qFutureStVlanEgressEthertype
This object sets the value for the Egress Ether type of a packet.
The value set for this object is applicable for a port present in
this VLAN only when the value of dot1qFutureVlanPortEgressTPIDType is set
to VLANbased(…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.65.1.29.1.3

dot1qFutureVlanPortSubnetMapExtTable

table
.1.3.6.1.4.1.2076.65.1.30 · 1 row entry · 5 columns
Open in standard view 
Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
dot1qFutureVlanPortSubnetMapExtEntry entry .1.3.6.1.4.1.2076.65.1.30.1
This object specifies the entry that contains VLAN-Subnet address mapping.
Indexes
dot1qFutureVlanPort dot1qFutureVlanPortSubnetMapExtAddr dot1qFutureVlanPortSubnetMapExtMask
Column Syntax OID
dot1qFutureVlanPortSubnetMapExtAddr
This object specifies the Source IP address for which the VLAN mapping is
present in the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.65.1.30.1.1
dot1qFutureVlanPortSubnetMapExtMask
This object specifies the Subnet Mask for which the VLAN mapping is
present in the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.65.1.30.1.2
dot1qFutureVlanPortSubnetMapExtVid
This object specifies the VLAN to which the Source IP-Subnet address of
this entry is mapped to.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.65.1.30.1.3
dot1qFutureVlanPortSubnetMapExtARPOption
This object specifies the configurable option for discarding/allowing
ARP untagged frames on the VLAN. The value allow (1) indicates that ARP
frames with source IP-subnet address matching the
dot1qFutureVlanPortSubnetMa…
Enumerationr/w
Enumerated Values:
1allow
2suppress
 .1.3.6.1.4.1.2076.65.1.30.1.4
dot1qFutureVlanPortSubnetMapExtRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.65.1.30.1.5

dot1qFutureVlanLoopbackTable

table
.1.3.6.1.4.1.2076.65.1.33 · 1 row entry · 1 columns
Open in standard view 
This table contains the Loopback Status for all VLANs.
dot1qFutureVlanLoopbackEntry entry .1.3.6.1.4.1.2076.65.1.33.1
This entry contains the VLAN loopback Status.
Indexes
dot1qFutureVlanIndex
Column Syntax OID
dot1qFutureVlanLoopbackStatus
This object specifies the loopback status for the VLAN.

When Loopback is enabled, all data packets received
in the VLAN will be sent back in the same port from which the packets
are received.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.1.33.1.1

dot1qFutureVlanTunnelTable

table deprecated
.1.3.6.1.4.1.2076.65.2.3 · 1 row entry · 1 columns
Open in standard view 
This table contains information about the dot1q tunnel ports. A walk on 
this table will show only those interfaces that are configured for
tunneling.
This table is supported only when the bridge is configured in Provider 
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel configuration objects 
are defined in fspb.mib
dot1qFutureVlanTunnelEntry entry .1.3.6.1.4.1.2076.65.2.3.1
Entry indicating the tunnel information of the port.
Indexes
dot1qFutureVlanPort
Column Syntax OID
dot1qFutureVlanTunnelStatus deprecated
Indicates whether dot1qTunnelling is enabled on disabled on this port.
dot1qFutureVlanTunnelStatus can be set to 'enabled' if and only if
the Bridge mode is set to be 'Provider Bridge Mode' and VLAN port
type is set to …
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.2.3.1.1

dot1qFutureVlanTunnelProtocolTable

table deprecated
.1.3.6.1.4.1.2076.65.2.4 · 1 row entry · 9 columns
Open in standard view 
This table contains information/statistics about the customer STP/GVRP BPDU's and
IGMP packets being tunneled inside the service provider network. A walk on this
table will show only those interfaces in which tunneling is enabled.
          
This table is supported only when the bridge is configured in Provider 
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel protocol configuration
objects are defined in fspb.mib.
dot1qFutureVlanTunnelProtocolEntry entry .1.3.6.1.4.1.2076.65.2.4.1
Entry indicating the tunneling of STP/GVRP BPDU's and IGMP Packets on this port.
Indexes
dot1qFutureVlanPort
Column Syntax OID
dot1qFutureVlanTunnelStpPDUs deprecated
Indicates whether tunneling of STP BPDUs is enabled or not.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.2.4.1.1
dot1qFutureVlanTunnelStpPDUsRecvd deprecated
The number of tunneled ingress STP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.2.4.1.2
dot1qFutureVlanTunnelStpPDUsSent deprecated
The number of tunneled egress STP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.2.4.1.3
dot1qFutureVlanTunnelGvrpPDUs deprecated
Indicates whether tunneling of GVRP BPDUs is enabled or not.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.2.4.1.4
dot1qFutureVlanTunnelGvrpPDUsRecvd deprecated
The number of tunneled ingress GVRP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.2.4.1.5
dot1qFutureVlanTunnelGvrpPDUsSent deprecated
The number of tunneled egress GVRP PDU's.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.2.4.1.6
dot1qFutureVlanTunnelIgmpPkts deprecated
Indicates whether tunneling of IGMP Packets is enabled or not.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.65.2.4.1.7
dot1qFutureVlanTunnelIgmpPktsRecvd deprecated
The number of tunneled ingress IGMP Packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.2.4.1.8
dot1qFutureVlanTunnelIgmpPktsSent deprecated
The number of tunneled egress IGMP Packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.65.2.4.1.9