dot1qFutureVlanPortUnicastMacLearning
ARICENT-VLAN-MIB ·
.1.3.6.1.4.1.2076.65.1.10.1.8
Object
column
r/w
EnabledStatus
A truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, no unicast MAC entry will be learnt on this port. When MAC learning is enabled, unicast MAC entries will be learnt on this port. Configuration of this object will not get affected by the value configured for dot1qFutureVlanGlobalMacLearningStatus.
Context
- MIB
- ARICENT-VLAN-MIB
- OID
.1.3.6.1.4.1.2076.65.1.10.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot1qFutureVlanPortEntry
- Table
- dot1qFutureVlanPortTable
- Siblings
- 16
Syntax
EnabledStatus
- Source
- EnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1qFutureVlanPort The port number of the port for which this entry applies. | column | Integer32 | .1.3.6.1.4.1.2076.65.1.10.1.1 |
| dot1qFutureVlanPortEgressEtherType In Customer Bridge Mode, this object indicates the ether type of
the C-VLAN tag that has to be applied for all the outgoing packets on
this port. If a valid value is in this objec… | column | Integer32 | .1.3.6.1.4.1.2076.65.1.10.1.10 |
| dot1qFutureVlanPortEgressTPIDType This object defines the Egress TPID type for a Port.
If the value is portbased(1) the egress TPID of the packet
is selected from Egress Port Table.
When the value i… | column | Enumeration | .1.3.6.1.4.1.2076.65.1.10.1.11 |
| dot1qFutureVlanPortAllowableTPID1 This object indicates the secondary ether type that is allowable for a port.
The configurable values for this object are either 0x8100 or 0x88a8.
Setting this MIB o… | column | Integer32 | .1.3.6.1.4.1.2076.65.1.10.1.12 |
| dot1qFutureVlanPortAllowableTPID2 This object indicates the standard ether type that is allowable for a port.
The configurable value for this object is Q-in-Q EtherType [0x9100].
Setting this MIB object is applica… | column | Integer32 | .1.3.6.1.4.1.2076.65.1.10.1.13 |
| dot1qFutureVlanPortAllowableTPID3 This object indicates the additional user defined ether type that is allowable for a port.
The value for this object is set by the dot1qFutureVlanUserDefinedTPID MIB.
… | column | Integer32 | .1.3.6.1.4.1.2076.65.1.10.1.14 |
| dot1qFutureVlanPortUnicastMacSecType This object identifies the MA Table Address Type for this port
sav - security is sav, strict is FALSE
Only unknown MAC is treated as violation on all secu… | column | Enumeration | .1.3.6.1.4.1.2076.65.1.10.1.15 |
| dot1qFuturePortPacketReflectionStatus Port Packet Reflection feature allows switching of packets received
on an ingress port back on the same port on which packet was received,
if the MAC Destination Address is on th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.10.1.16 |
| dot1qFutureVlanPortProtectedStatic The static Split Horizon property of the port. If set to true, frames
that are received on any other port that has the same property set to
true will not be forwarded on this por… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.10.1.17 |
| dot1qFutureVlanPortType The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added… | column | Enumeration | .1.3.6.1.4.1.2076.65.1.10.1.2 |
| dot1qFutureVlanPortMacBasedClassification This Object is used to explicitly enable/disable the MAC based classification
on port. This can be independently set without
any dependency in available configuration of
dot1qF… | column | EnabledStatus | .1.3.6.1.4.1.2076.65.1.10.1.3 |
| dot1qFutureVlanPortPortProtoBasedClassification This Object is used to explicitly enable/disable the port and protocol
classification on port. This can be independently set without
any dependency in available configuration of
… | column | EnabledStatus | .1.3.6.1.4.1.2076.65.1.10.1.4 |
| dot1qFutureVlanFilteringUtilityCriteria Based on this object, learning on a port is decided.
If default filtering utility criteria is selected on a port, then
learning of source MAC from a received packet… | column | Enumeration | .1.3.6.1.4.1.2076.65.1.10.1.5 |
| dot1qFutureVlanPortProtected The Split Horizon property of the port. If set to true, frames that
are received on any other port that has the same property set to true,
will not be forwarded on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.65.1.10.1.6 |
| dot1qFutureVlanPortSubnetBasedClassification This Object is used to explicitly enable/disable the subnet based VLAN Classification
on port. This can be independently set without any dependency in
available configuration of… | column | EnabledStatus | .1.3.6.1.4.1.2076.65.1.10.1.7 |
| dot1qFutureVlanPortIngressEtherType In Customer Bridge mode, this object indicates the primary C-VLAN tag ether
type used for the packets received on this port. Packets received on a port
are considered tagged, wh… | column | Integer32 | .1.3.6.1.4.1.2076.65.1.10.1.9 |