ARICENT-RFC2544-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
58

fs2544ContextTable

table
.1.3.6.1.4.1.29601.2.105.1.1 · 1 row entry · 7 columns
Open in standard view 
This table contains all the global configurations of RFC2544
per virtual context of the router.
fs2544ContextEntry entry .1.3.6.1.4.1.29601.2.105.1.1.1
This object specifies an entry of virtual context RFC2544 Global
parameters.
Indexes
fs2544ContextId
Column Syntax OID
fs2544ContextId
This object specifies an unique identifier to identify the virtual
context.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.1.1.1.1
fs2544ContextName
This object specifies context-name for the virtual context.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.29601.2.105.1.1.1.2
fs2544ContextSystemControl
This object specifies the administrative system control status of RFC2544
module.

The value 'start' (1) indicates that all
resources required by RFC2544 module should be allocated
and RFC2544 should be s…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.29601.2.105.1.1.1.3
fs2544ContextModuleStatus
This object sepcifies the administrative module status of RFC2544 module.
This enables or disables RFC2544 in the system.

A value of 'enabled' (1) indicates that RFC2544 is
enabled in the virtaul contex…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.105.1.1.1.4
fs2544ContextTraceOption
This object is used to enable the trace statements in
RFC2544 Module.

A FOUR BYTE integer is specified for enabling the level of tracing.
Each BIT in the four byte integer, represents a
level of Trace.
…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.105.1.1.1.5
fs2544ContextNumOfTestRunning
This object specifies the number of test currently running
in a virtual context.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.1.1.1.6
fs2544ContextTrapStatus
This object is used to enable or disable the transmission
of TRAP notification messages.

By default this object is set to enable for all
virtual context.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.105.1.1.1.7

fs2544SlaTable

table
.1.3.6.1.4.1.29601.2.105.2.1 · 1 row entry · 11 columns
Open in standard view 
This table contains Service Level Agreement configurations.
fs2544SlaEntry entry .1.3.6.1.4.1.29601.2.105.2.1.1
This entry contains information about a particular SLA
Configuration.
Indexes
fs2544ContextId fs2544SlaId
Column Syntax OID
fs2544SlaId
This object specifies the RFC2544 Service Level Agreement Identifier.
This is a free running index used to identify a SLA.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.105.2.1.1.1
fs2544SlaMEG
This object specifies the Maintenance Entity Group (MEG).
Internally this object refers to MIB object dot1agCfmMdIndex
of ECFM 802.1ag standard.The value zero(0) is used for unmapping
MEG from Sla.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.105.2.1.1.2
fs2544SlaME
This object specifies the Maintenance Entity (ME)
Internally this object refers to MIB object dot1agCfmMaIndex
of ECFM 802.1ag standard. The value zero(0) is used for unmapping
ME from Sla.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.29601.2.105.2.1.1.3
fs2544SlaMEP
This object specifies the Maintenance Association End Point (MEP).
Internally this object refers to MIB object
dot1agCfmMepIdentifier of ECFM 802.1ag standard.The value zero(0)
is used for unmapping MEP from Sla.
Unsigned32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.29601.2.105.2.1.1.4
fs2544SlaTrafficProfileId
This object specifies the RFC2544 Traffic Profile Identifier that is to be
associated with SLA.The value zero(0) is used for unmapping traffic
profile from Sla.
Unsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.29601.2.105.2.1.1.5
fs2544SlaSacId
This object specifies the RFC2544 SAC Identifier that is to be
associated with the SLA.The value zero(0) is used for unmapping
Sac from Sla.
Unsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.29601.2.105.2.1.1.6
fs2544SlaTestStatus
This object specifies the RFC2544 SLA test status. It is used to
start or stop the test.
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.29601.2.105.2.1.1.7
fs2544SlaCurrentTestState
This object specifies the current test state of the SLA.
Enumeration
Enumerated Values:
1notInitiated
2inProgress
3completed
4aborted
 .1.3.6.1.4.1.29601.2.105.2.1.1.8
fs2544SlaTestStartTime
This object specifies the start time of the benchmark test in
RFC2544 .
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.29601.2.105.2.1.1.9
fs2544SlaTestEndTime
This object specifies the end time of the benchmark test in
RFC2544 .
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.29601.2.105.2.1.1.10
fs2544SlaRowStatus
This object is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
fs2544SlaRowStatus
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.105.2.1.1.11

fs2544TrafficProfileTable

table
.1.3.6.1.4.1.29601.2.105.3.1 · 1 row entry · 23 columns
Open in standard view 
This table contains RFC2544 Test profile Table configurations.
fs2544TrafficProfileEntry entry .1.3.6.1.4.1.29601.2.105.3.1.1
This entry contains information about a particular test profile
Configuration.
Indexes
fs2544ContextId fs2544TrafficProfileId
Column Syntax OID
fs2544TrafficProfileId
This object specifies the RFC2544 Traffic Profile Identifier.
This is a free running index used to identify a Benchmark Test.
Traffic Profile cannot be deleted when it is associated with a
SLA.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.29601.2.105.3.1.1.1
fs2544TrafficProfileName
This object specifies the name of the RFC2544 profile.
By default, the test profile name will be constructed by
appending test profile ID to the string profile.

Example: Default test profile name for a…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.29601.2.105.3.1.1.2
fs2544TrafficProfileSeqNoCheck
This object is used to enable or disable the validation of
sequence number in received frames.

Enable - Sequence number is validated for the received frames and
this provides the report of th…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.105.3.1.1.3
fs2544TrafficProfileDwellTime
This object specifies the number of seconds to wait after each trail
for the system to settle before reading the statistics from hardware.
Integer32r/w
Constraints:
range: 5-60
 .1.3.6.1.4.1.29601.2.105.3.1.1.4
fs2544TrafficProfileFrameSize
This object specifies the frame size used for each benchmark test.
The configurable frame sizes are 64,128,256,512,1024,1280 and 1518.
By default the test is done for all frame sizes
(64,128,256,512,1024,1280,1518)
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.29601.2.105.3.1.1.5
fs2544TrafficProfilePCP
This object specifies the PCP (Priority Code Point)
that is to be inserted in the generated test frames.
PCP value is inserted only if the Mep Type is Vlan based Mep.
IEEE8021-TC-MIBIEEE8021PriorityCodePointr/w
Textual Convention: IEEE8021-TC-MIBIEEE8021PriorityCodePoint Enumeration
Type Values:
1codePoint8p0d
2codePoint7p1d
3codePoint6p2d
4codePoint5p3d
 .1.3.6.1.4.1.29601.2.105.3.1.1.6
fs2544TrafficProfileThTestStatus
This object enables or disables throughput test .
Throughput test - Measures the maximum rate at
which none of the offered frames are dropped
on the device.

If TRUE, then the throughput test will be ena…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.105.3.1.1.7
fs2544TrafficProfileFlTestStatus
This object enables or disables the Frame Loss Rate test .
Frame Loss rate - Measures the performance
of a network device in overloaded state.

If TRUE, then the Frame Loss Rate test will be enabled.
If F…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.105.3.1.1.8
fs2544TrafficProfileLaTestStatus
This object enables or Disables the Latency test
Latency test - Measures the time taken by a test
frame to travel through a network device

If TRUE, then the Latency test will be enabled.
If FALSE, then t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.105.3.1.1.9
fs2544TrafficProfileBbTestStatus
This object enables or Disbales the Back-To-Back
Frame test.
Back-To-Back Frame Test - Measures the buffering
capacity of a device.

If TRUE, then the Back-To-Back Frame test will be enabled.
If FALSE, t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.105.3.1.1.10
fs2544TrafficProfileThTrialDuration
This object specifies the duration of each trails in seconds for
Throughput test.
secondsUnsigned32r/w
Constraints:
range: 10-1800
 .1.3.6.1.4.1.29601.2.105.3.1.1.11
fs2544TrafficProfileThMaxRate
This object specifies the maximum rate for the Throughput
test.It is specified in % of the link's bandwidth.
The default value is 100% of the link speed
percentageSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.3.1.1.12
fs2544TrafficProfileThMinRate
This object specifies the minimum rate for the Throughput
test. It is specified in % of the link's bandwidth.
The default value is 80% of the link speed
percentageSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.3.1.1.13
fs2544TrafficProfileLaTrialDuration
This object specifies the trial duration for
Latency(Delay Measurement)Test in seconds.
secondsUnsigned32r/w
Constraints:
range: 10-1800
 .1.3.6.1.4.1.29601.2.105.3.1.1.14
fs2544TrafficProfileLaDelayMeasureInterval
This object specifies the number of seconds between each
delay measurement.
secondsUnsigned32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.29601.2.105.3.1.1.15
fs2544TrafficProfileFlTrialDuration
This object specifies the duration of the trail for
Frame Loss Test in seconds.
secondsUnsigned32r/w
Constraints:
range: 10-1800
 .1.3.6.1.4.1.29601.2.105.3.1.1.16
fs2544TrafficProfileFlMaxRate
This object specifies the maximum rate for the Frame Loss
test. It is specified in % of the link's bandwidth.
The default value is 100% of the link speed
percentageSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.3.1.1.17
fs2544TrafficProfileFlMinRate
This object specifies the minimum rate for the Frame Loss
test. It is specified in % of the link's bandwidth.
The default value is 80% of the link speed
percentageSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.3.1.1.18
fs2544TrafficProfileFlRateStep
This object specifies the granularity between the minimum and
maximum rates defined for Frame Loss Test. It is specified in %
of the link's bandwidth .
The default value is 10% of the link speed
percentageSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.3.1.1.19
fs2544TrafficProfileBbTrialDuration
This object specifies the trail duration for Back-To-Back test
in seconds.
millisecondsUnsigned32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.29601.2.105.3.1.1.20
fs2544TrafficProfileBbTrialCount
This object specifies the number of times the Back-To-Back test
is to be executed.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.105.3.1.1.21
fs2544TrafficProfileThRateStep
This object specifies the granularity between the minimum and
maximum rates defined for Throughput Test. It is specified in %
of the link's bandwidth .
The default value is 10% of the link speed
percentageSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.3.1.1.22
fs2544TrafficProfileRowStatus
This object is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
fs2544TrafficProfileRowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.105.3.1.1.23

fs2544SacTable

table
.1.3.6.1.4.1.29601.2.105.4.1 · 1 row entry · 5 columns
Open in standard view 
This table contains RFC2544 Service Acceptance Criteria
Table configurations.
fs2544SacEntry entry .1.3.6.1.4.1.29601.2.105.4.1.1
This entry contains information about Service
Acceptance Criteria configuration.
Indexes
fs2544ContextId fs2544SacId
Column Syntax OID
fs2544SacId
This object specifies the RFC2544 SAC Identifier. This is
used to identify a particular SAC entry.
Sac cannot be deleted when it is associated with a SLA.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.29601.2.105.4.1.1.1
fs2544SacThAllowedFrameLoss
This object specifies the allowable frame loss in percentage
for the Throughput test .
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.29601.2.105.4.1.1.2
fs2544SacLaAllowedFrameLoss
This object specifies the allowable frame loss in percentage
for latency test.
percentageUnsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.29601.2.105.4.1.1.3
fs2544SacFlAllowedFrameLoss
This object specifies the allowable frame loss in percentage
for Frame Loss Rate test.
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.29601.2.105.4.1.1.4
fs2544SacRowStatus
This object is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
fs2544SacRowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.105.4.1.1.5

fs2544ReportStatsTable

table
.1.3.6.1.4.1.29601.2.105.5.1 · 1 row entry · 12 columns
Open in standard view 
This table contains the statistics of the benchmark test performed.
fs2544ReportStatsEntry entry .1.3.6.1.4.1.29601.2.105.5.1.1
This entry specifies the statistics about a particular Test performed.
Indexes
fs2544ContextId fs2544SlaId fs2544ReportStatsFrameSize
Column Syntax OID
fs2544ReportStatsFrameSize
This object specifies the frame size for which the test is
performed.
Unsigned32
Constraints:
range: 64-1518
 .1.3.6.1.4.1.29601.2.105.5.1.1.1
fs2544ReportStatsThVerifiedBps
This object specifies the verified throughput value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.5.1.1.2
fs2544ReportStatsThResult
This object specifies the throughput result.
Enumeration
Enumerated Values:
1pass
2fail
3notInitiated
4aborted
 .1.3.6.1.4.1.29601.2.105.5.1.1.3
fs2544ReportStatsLatencyMin
This object specifies the Minimum delay measured.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.5.1.1.4
fs2544ReportStatsLatencyMax
This object specifies the Maximum delay measured.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.5.1.1.5
fs2544ReportStatsLatencyMean
This object specifies the Average delay measured.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.105.5.1.1.6
fs2544ReportStatsLatencyFailCount
This object specifies the number of failures against
each frame.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.105.5.1.1.7
fs2544ReportStatsLaIterationCalculated
This object specifies the number of iterations used
for calculation.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.105.5.1.1.8
fs2544ReportStatsLatencyResult
This object specifies the Latency result.
Enumeration
Enumerated Values:
1pass
2fail
3notApplicable
4aborted
 .1.3.6.1.4.1.29601.2.105.5.1.1.9
fs2544ReportStatsFLossRate
This object specifies the Frame Loss Rate observed during the test.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.105.5.1.1.10
fs2544ReportStatsFLResult
This object specifies the Frame Loss rate result.
Enumeration
Enumerated Values:
1pass
2fail
3notApplicable
4aborted
 .1.3.6.1.4.1.29601.2.105.5.1.1.11
fs2544ReportStatsBacktoBackBurstSize
This object specifies the Back to Back frame test result.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.105.5.1.1.12