fs2544TrafficProfileLaTestStatus
ARICENT-RFC2544-MIB ·
.1.3.6.1.4.1.29601.2.105.3.1.1.9
Object
This object enables or Disables the Latency test
Latency test - Measures the time taken by a test
frame to travel through a network device
If TRUE, then the Latency test will be enabled.
If FALSE, then the Latency test will be disabled.
Context
- MIB
- ARICENT-RFC2544-MIB
- OID
.1.3.6.1.4.1.29601.2.105.3.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fs2544TrafficProfileEntry
- Table
- fs2544TrafficProfileTable
- Siblings
- 22
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fs2544TrafficProfileId This object specifies the RFC2544 Traffic Profile Identifier.
This is a free running index used to identify a Benchmark Test.
Traffic Profile cannot be deleted when it is associa… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.1 |
| fs2544TrafficProfileBbTestStatus This object enables or Disbales the Back-To-Back
Frame test.
Back-To-Back Frame Test - Measures the buffering
capacity of a device.
If TRUE, then the Back-To-Back… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.105.3.1.1.10 |
| fs2544TrafficProfileThTrialDuration This object specifies the duration of each trails in seconds for
Throughput test. | column | seconds Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.11 |
| fs2544TrafficProfileThMaxRate This object specifies the maximum rate for the Throughput
test.It is specified in % of the link's bandwidth.
The default value is 100% of the link speed | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.12 |
| fs2544TrafficProfileThMinRate This object specifies the minimum rate for the Throughput
test. It is specified in % of the link's bandwidth.
The default value is 80% of the link speed | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.13 |
| fs2544TrafficProfileLaTrialDuration This object specifies the trial duration for
Latency(Delay Measurement)Test in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.14 |
| fs2544TrafficProfileLaDelayMeasureInterval This object specifies the number of seconds between each
delay measurement. | column | seconds Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.15 |
| fs2544TrafficProfileFlTrialDuration This object specifies the duration of the trail for
Frame Loss Test in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.16 |
| fs2544TrafficProfileFlMaxRate This object specifies the maximum rate for the Frame Loss
test. It is specified in % of the link's bandwidth.
The default value is 100% of the link speed | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.17 |
| fs2544TrafficProfileFlMinRate This object specifies the minimum rate for the Frame Loss
test. It is specified in % of the link's bandwidth.
The default value is 80% of the link speed | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.18 |
| fs2544TrafficProfileFlRateStep This object specifies the granularity between the minimum and
maximum rates defined for Frame Loss Test. It is specified in %
of the link's bandwidth .
The default value is 10% … | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.19 |
| fs2544TrafficProfileName This object specifies the name of the RFC2544 profile.
By default, the test profile name will be constructed by
appending test profile ID to the string profile.
… | column | OctetString | .1.3.6.1.4.1.29601.2.105.3.1.1.2 |
| fs2544TrafficProfileBbTrialDuration This object specifies the trail duration for Back-To-Back test
in seconds. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.20 |
| fs2544TrafficProfileBbTrialCount This object specifies the number of times the Back-To-Back test
is to be executed. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.21 |
| fs2544TrafficProfileThRateStep This object specifies the granularity between the minimum and
maximum rates defined for Throughput Test. It is specified in %
of the link's bandwidth .
The default value is 1… | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.105.3.1.1.22 |
| fs2544TrafficProfileRowStatus This object is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.105.3.1.1.23 |
| fs2544TrafficProfileSeqNoCheck This object is used to enable or disable the validation of
sequence number in received frames.
Enable - Sequence number is validated for the received frames and
… | column | Enumeration | .1.3.6.1.4.1.29601.2.105.3.1.1.3 |
| fs2544TrafficProfileDwellTime This object specifies the number of seconds to wait after each trail
for the system to settle before reading the statistics from hardware. | column | Integer32 | .1.3.6.1.4.1.29601.2.105.3.1.1.4 |
| fs2544TrafficProfileFrameSize This object specifies the frame size used for each benchmark test.
The configurable frame sizes are 64,128,256,512,1024,1280 and 1518.
By default the test is done for all frame si… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.29601.2.105.3.1.1.5 |
| fs2544TrafficProfilePCP This object specifies the PCP (Priority Code Point)
that is to be inserted in the generated test frames.
PCP value is inserted only if the Mep Type is Vlan based Mep. | column | IEEE8021-TC-MIBIEEE8021PriorityCodePoint | .1.3.6.1.4.1.29601.2.105.3.1.1.6 |
| fs2544TrafficProfileThTestStatus This object enables or disables throughput test .
Throughput test - Measures the maximum rate at
which none of the offered frames are dropped
on the device.
If TR… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.105.3.1.1.7 |
| fs2544TrafficProfileFlTestStatus This object enables or disables the Frame Loss Rate test .
Frame Loss rate - Measures the performance
of a network device in overloaded state.
If TRUE, then the Fr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.105.3.1.1.8 |