ARICENT-MPLS-TE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
47

fsMplsTunnelTable

table
.1.3.6.1.4.1.2076.13.12.1.2 · 1 row entry · 21 columns
Open in standard view 
The fsMplsTunnelTable is extension of mplsTunnelTable.
fsMplsTunnelEntry entry .1.3.6.1.4.1.2076.13.12.1.2.1
The fsMplsTunnelTable is extension of mplsTunnelTable.
Indexes
No indexes recorded
Column Syntax OID
fsMplsTunnelType
This object allows the administrator to the tunnel type of a MPLS
tunnel.

The value of bit 0 (mpls) if set indicates that this is a normal
MPLS Tunnel.

The value of bit 1 (mplstp) if set in…
Bitsr/w
Enumerated Values:
0mpls
1mplstp
2gmpls
3hlsp
4p2mp
 .1.3.6.1.4.1.2076.13.12.1.2.1.1
fsMplsTunnelLSRIdMapInfo
This object indicates whether the Ingress and Egress LSR
ID objects of the tunnel entry to be treated as LSR IDs
or should be treated as an index to the fsMplsTpNodeMapTable.

The value of bit 0 (ingressI…
Bitsr/w
Enumerated Values:
0ingressId
1egressId
 .1.3.6.1.4.1.2076.13.12.1.2.1.2
fsMplsTunnelMode
This object allows the administrator to configure the mode of
tunnel.

The value unidirectional (0) indicates that the direction of the
tunnel is only single direction.

The value coroutedB…
Enumerationr/w
Enumerated Values:
0unidirectional
1coroutedBidirectional
2associatedBidirectional
 .1.3.6.1.4.1.2076.13.12.1.2.1.3
fsMplsTunnelProactiveSessIndex
This object indicates the proactive session index for this tunnel.
When a proactive session to monitor this tunnel is established,
the application updates this object with the session index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.2.1.4
fsMplsTunnelMBBStatus
The administrative Make-Before-Break status for Tunnel.
The value 'enabled' (1) indicates that Tunnel supports
Make-Before-Break capablity.The value 'disabled' (2)
indicates that Tunnel does not support
Make-Before-B…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.13.12.1.2.1.5
fsMplsTunnelDisJointType
This object indicates the disjoint type of the protection tunnel
with respect to the working tunnel. It is applicable only for
protection tunnel.
Enumerationr/w
Enumerated Values:
1srlgDisjoint
2nodeDisjoint
3linkDisjoint
 .1.3.6.1.4.1.2076.13.12.1.2.1.6
fsMplsTunnelAttPointer
This variable points to a row in the fsTunnelAttributeTable .
This table identifies the attribute of LSP. A value of zeroDotZero
indicates that no Attribute has been associated with this
tunnel yet.
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.2076.13.12.1.2.1.7
fsMplsTunnelEndToEndProtection
This bitmask indicates the level of end to end protection required. A
value of zero (no bits set) indicates that any protection may be
used. The following describes these bitfields:

unprotected
This f…
Bitsr/w
Enumerated Values:
0unprotected
1fullReroute
2rerouteWithoutExtraTraffic
3dedicatedOneToOne
4dedicatedUniOnePlusOne
5dedicatedBiOnePlusOne
 .1.3.6.1.4.1.2076.13.12.1.2.1.8
fsMplsTunnelPrConfigOperType
This object is used to indicate the operation type/mode of the tunnel.
If the value is set to 'revertive(1)', the normal traffic shall be
returned to the working LSP has recoverd from the failure. (i.e)
after the est…
Enumerationr/w
Enumerated Values:
1revertive
2nonRevertive
 .1.3.6.1.4.1.2076.13.12.1.2.1.9
fsMplsTunnelSrlgType
This object indicates shared risk link group value for this tunnel.
Enumerationr/w
Enumerated Values:
1includeAny
2includeAll
3excludeAny
 .1.3.6.1.4.1.2076.13.12.1.2.1.10
fsMplsTunnelIfIndex
If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise
this variable should contain the value of zero
indicating that a vali…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.13.12.1.2.1.11
fsMplsTunnelInitReOptimize
This object is used to indicate the Reoptimization of the tunnel. When
this object is set true then user has initiated reoptimization. Default
value of this object is FALSE.
A tunnel is defined as being reoptimized when…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.12.1.2.1.12
fsMplsTunnelIsProtectingLsp
This object specifies whether this LSP is working LSP or protection
LSP. If this object is set to true, it means the LSP is protection LSP.
If this object is set to false, it means the LSP is working LSP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.12.1.2.1.13
fsMplsLspTunnelMapIndex
This object is used to indicate the tunnel index of FA LSP to which the
tunnel is stacked. This object is applicable only in the node on which
stacking of FA LSP and E2E LSP occurs
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2076.13.12.1.2.1.14
fsMplsLspTunnelMapInstance
This object is used to indicate the tunnel instance of FA LSP to which the
tunnel is stacked. This object is applicable only in the node on which
stacking of FA LSP and E2E LSP occurs
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.2.1.15
fsMplsLspTunnelMapIngressLSRId
This object is used to indicate the identity of the Ingress LSR of FA LSP
to which the tunnel is stacked. This object is applicable only in the
node on which stacking of FA LSP and E2E LSP occurs
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.2.1.16
fsMplsLspTunnelMapEgressLSRId
This object is used to indicate the identity of the Egress LSR of FA LSP
to which the tunnel is stacked. This object is applicable only in the
node on which stacking of FA LSP and E2E LSP occurs
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.2.1.17
fsMplsTunnelSynchronizationStatus
Indicates the Synchronization status of the tunnel upon RSVP-TE Graceful
Restart. This object is applicable only for RSVP-TE signalled tunnels.
Following values are possible.
0. Not synchronized.
1. Downstream Synchroni…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.13.12.1.2.1.18
fsMplsTunnelOutPathMsgId
Denotes the message id generated for the PATH message which is sent from the
node.
This is used for recovering the state when the node receives
SRefresh RecoveryPath message from the helper.
This is applicable only …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.13.12.1.2.1.19
fsMplsTunnelBackupHopTableIndex
This object specifies the entry of index into the
mplsTunnelHopTable that hops the explicit route for
backup tunnel when the object fsMplsTunnelEndToEndProtection for the
tunnel is set as dedicatedOneToOne.
This valu…
MPLS-TC-STD-MIBMplsPathIndexOrZeror/w
Textual Convention: MPLS-TC-STD-MIBMplsPathIndexOrZero Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.2.1.20
fsMplsTunnelBackupPathInUse
This object specifies the entry of index into the
mplsTunnelHopTable that hops the backup path used
for backup tunnel when the object fsMplsTunnelEndToEndProtection for the
tunnel is set as dedicatedOneToOne.
This va…
MPLS-TC-STD-MIBMplsPathIndexOrZeror/w
Textual Convention: MPLS-TC-STD-MIBMplsPathIndexOrZero Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.2.1.21

fsMplsTpTunnelTable

table
.1.3.6.1.4.1.2076.13.12.1.3 · 1 row entry · 2 columns
Open in standard view 
This table represents MPLS-TP specific extensions to
mplsTunnelTable.
          
As per MPLS-TP Identifiers draft,  LSP_ID is 
          
Src-Global_Node_ID::Src-Tunnel_Num::Dst-Global_Node_ID::
Dst-Tunnel_Num::LSP_Num 
          
mplsTunnelTable is reused for forming the LSP_ID as follows,
          
Source Tunnel_Num is mapped with mplsTunnelIndex,
Source node identifier is mapped with mplsTunnelIngressLSRId,
Destination node identifier is mapped with mplsTunnelEgressLSRId
LSP_Num is mapped with mplsTunnelInstance.
          
Source Global identifier and Destination Global identifier are
maintained in the fsMplsTpNodeMapTable and 
          
fsMplsTpNodeMapLocalNum is used to create an entry in
mplsTunnelTable.
fsMplsTpTunnelEntry entry .1.3.6.1.4.1.2076.13.12.1.3.1
An entry in this table represents MPLS-TP
specific tunnel configurations.
Indexes
No indexes recorded
Column Syntax OID
fsMplsTpTunnelDestTunnelIndex
This object allows the administrator to configure the tunnel index of
the reverse tunnel.

For co-routed bidirectional tunnel, this object will have the value
same as the object mplsTunnelIndex. …
MPLS-TC-STD-MIBMplsTunnelIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2076.13.12.1.3.1.1
fsMplsTpTunnelDestTunnelLspNum
This object allows the administrator to configure the tunnel lsp
number of the reverse tunnel for a associated bidirectional tunnel.

This object helps to associate a forward tunnel with the reverse
tunnel…
MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.3.1.2

fsTunnelAttributeTable

table
.1.3.6.1.4.1.2076.13.12.1.5 · 1 row entry · 13 columns
Open in standard view 
The fsTunnelAttributeTable allows allows configuration 
of LSP attribute parameters.
fsTunnelAttributeEntry entry .1.3.6.1.4.1.2076.13.12.1.5.1
An entry in this table represents attribute parameters
to be associated with a LSP.
Indexes
fsTunnelAttributeIndex
Column Syntax OID
fsTunnelAttributeIndex
Unique value that identifies a row in this table.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2076.13.12.1.5.1.1
fsTunnelAttributeName
The canonical name assigned to the LSP attribute entry. This uniquely
identifies the attribute entry.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.13.12.1.5.1.2
fsTunnelAttributeSetupPrio
This object indicates the setup priority attribute. There is no default
value for this object. If this object is not configured, then LSP takes
this attribute from mplsTunnelTable.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.13.12.1.5.1.3
fsTunnelAttributeHoldingPrio
This object indicates the holding priority attribute. There is no default
value for this object. If this object is not configured, then LSP takes
this attribute from mplsTunnelTable.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.13.12.1.5.1.4
fsTunnelAttributeIncludeAnyAffinity
A link satisfies the include-any constraint if and only if the constraint
is zero, or the link and the constraint have a resource class in common.
Valid range is Integer(0..4294967295). There is no default value for thi…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.5.1.5
fsTunnelAttributeIncludeAllAffinity
A link satisfies the include-all constraint if and only if the link
contains all of the administrative groups specified in the constraint.
Valid range is Integer(0..4294967295). There is no default value for this
object…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.5.1.6
fsTunnelAttributeExcludeAnyAffinity
A link satisfies the exclude-any constraint if and only if the link
contains none of the administrative groups specified in the constraint.
Valid range is Integer(0..4294967295). There is no default value for this
objec…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.5.1.7
fsTunnelAttributeSessionAttributes
This bit mask indicates optional session values for
this LSP. The following describes these bit
fields:

fastReroute This flag indicates that the any lsp hop may
choose to reroute this LSP.This flag permit…
Bitsr/w
Enumerated Values:
0fastReroute
1mergingPermitted
2isPersistent
3isPinned
4recordRoute
 .1.3.6.1.4.1.2076.13.12.1.5.1.8
fsTunnelAttributeBandwidth
This object indicates the bandwidth attribute. There is no default
value for this object. If this object is not configured, then
LSP takes this attribute from mplsTunnelTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.5.1.9
fsTunnelAttributeTeClassType
This object represents the Class-Type attribute. There is no default
value for this object. If this object is not configured, then
LSP takes this attribute from the tunnel configuration.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.2076.13.12.1.5.1.10
fsTunnelAttributeSrlgType
This object represents Shared Risk Link Group Value attribute.
There is no default value for this object.
If this object is not configured, then LSP takes this attribute from the
tunnel configuration.
Enumerationr/w
Enumerated Values:
1includeAny
2includeAll
3excludeAny
 .1.3.6.1.4.1.2076.13.12.1.5.1.11
fsTunnelAttributeRowStatus
This object is used to create, modify, and/or delete a row in this
table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.13.12.1.5.1.12
fsTunnelAttributeMask
This object is used to find the number of Attribute parameters
considered while setting up the path.
If no bits are set, it means no Attribute parameters are
configured
Bitsr/w
Enumerated Values:
0setupPriority
1holdingPriority
2sessionAttribute
3includeAnyAffinity
4includeAllAffinity
5excludeAllAffinity
6bandwidth
7classType
8srlg
 .1.3.6.1.4.1.2076.13.12.1.5.1.13

fsMplsTunnelSrlgTable

table
.1.3.6.1.4.1.2076.13.12.1.6 · 1 row entry · 2 columns
Open in standard view 
The fsMplsTunnelSrlgTable allows the administrator to configure
Shared Risk Link Group Values for tunnels.
fsMplsTunnelSrlgEntry entry .1.3.6.1.4.1.2076.13.12.1.6.1
An entry in this table represents Shared Risk Link Group Values values
associated with a Tunnel.
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId fsMplsTunnelSrlgNo
Column Syntax OID
fsMplsTunnelSrlgNo
This object identifies an SRLG constraint associated with Tunnel.
An SRLG is identified with a 32-bit number that is unique within an IGP
domain. Zero is a valid SRLG number.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2076.13.12.1.6.1.1
fsMplsTunnelSrlgRowStatus
This variable is used to create, modify, and/or delete a row in this
table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.13.12.1.6.1.2

fsTunnelAttributeSrlgTable

table
.1.3.6.1.4.1.2076.13.12.1.7 · 1 row entry · 2 columns
Open in standard view 
The fsTunnelAttributeSrlgTable allows the administrator to configure
Shared Risk Link Group Values for each Attribute List to be 
associated with the Tunnel.
fsTunnelAttributeSrlgEntry entry .1.3.6.1.4.1.2076.13.12.1.7.1
An entry in this table represents Shared Risk Link Group Values
associated with a attribute list.
Indexes
fsTunnelAttributeIndex fsTunnelAttributeSrlgNo
Column Syntax OID
fsTunnelAttributeSrlgNo
This object identifies an SRLG constraint associated with a Attribute
list. An SRLG is identified with a 32-bit number that is unique within
an IGP domain. Zero is a valid SRLG number.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2076.13.12.1.7.1.1
fsTunnelAttributeSrlgRowStatus
This variable is used to create, modify, and/or delete a row in this
table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.13.12.1.7.1.2

fsMplsTunnelHopTable

table
.1.3.6.1.4.1.2076.13.12.1.8 · 1 row entry · 1 columns
Open in standard view 
The fsMplsTunnelHopTable extends the mplsTunnelHopTable of 
MPLS-TE-STD-MIB. This table has the additional Constraint that needs
to be considered when calculating the path to reach the 
destination.
fsMplsTunnelHopEntry entry .1.3.6.1.4.1.2076.13.12.1.8.1
An entry in this table represents additions to a tunnel hop defined
in mplsTunnelHopEntry. This entry is valid only at the Ingress of the
tunnel and this table is configured only by the network Administrator.
Indexes
No indexes recorded
Column Syntax OID
fsMplsTunnelHopIncludeAny
If this value is set to true, then this indicates that this hop is
configured as an include any node.
If a hop in the table is
configured as include any, then it overrides the configuration of
mplsTunnelHopInclude ob…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.12.1.8.1.1

fsMplsReoptimizationTunnelTable

table
.1.3.6.1.4.1.2076.13.12.1.9 · 1 row entry · 6 columns
Open in standard view 
This object is used to configure
Shared Risk Link Group Values for tunnels.
fsMplsReoptimizationTunnelEntry entry .1.3.6.1.4.1.2076.13.12.1.9.1
This object specifies an entry in this table that represents the list
of tunnels on which reoptimazation is enabled. This table is applicable
on Transit and Egress Nodes.
Indexes
fsMplsReoptimizationTunnelIndex fsMplsReoptimizationTunnelIngressLSRId fsMplsReoptimizationTunnelEgressLSRId
Column Syntax OID
fsMplsReoptimizationTunnelIndex
This object specifies the Tunnel index of the tunnel,
which has reoptimization enabled.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2076.13.12.1.9.1.1
fsMplsReoptimizationTunnelIngressLSRId
This object specifies the Tunnel Ingress LSR ID of the
Reoptimization Tunnel.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.9.1.2
fsMplsReoptimizationTunnelEgressLSRId
This object specifies the Tunnel Egress LSR ID of the
Reoptimization Tunnel.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.12.1.9.1.3
fsMplsReoptimizationTunnelStatus
This object specifies the Reoptimization status
of Tunnel, which indicates whether reoptimization is enabled
or disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.12.1.9.1.4
fsMplsReoptimizationTunnelManualTrigger
This object is used to trigger manual Reoptimization
of Tunnel, mentioned in RFC 4736.
The default value of this object is 'false(2)'.
The configurable value of this object is 'true(1)' only.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.12.1.9.1.5
fsMplsReoptimizationTunnelRowStatus
This object is used to create and delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.13.12.1.9.1.6