ARICENT-MPLS-FRR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
38

fsMplsFrrConstTable

table
.1.3.6.1.4.1.2076.13.3.2.1.1 · 1 row entry · 12 columns
Open in standard view 
This table shows detour LSP or bypass tunnel setup
constraints.
fsMplsFrrConstEntry entry .1.3.6.1.4.1.2076.13.3.2.1.1.1
An entry in this table represents detour LSP or bypass
tunnel setup constraints for a tunnel instance to be
protected by detour LSPs or a bypass tunnel.

Agents must only allow entries in this table to be
cr…
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId
Column Syntax OID
fsMplsFrrConstIfIndex
Uniquely identifies an interface which a fast reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicates that the protection tunnel configured prot…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.1
fsMplsFrrConstProtectionMethod
This object indicates which protection method is to be used for fast
reroute on the device. Some devices requires a reboot
if this variable is to take affect after being modified.
Enumerationr/w
Enumerated Values:
1oneToOneBackup
2facilityBackup
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.2
fsMplsFrrConstProtectionType
Indicates type of the resource protection:

linkProtection(1) indicates that this tunnel is
setup to protect a particular link's resources.

nodeProtection(2) indicates that this tunnel is
…
Enumerationr/w
Enumerated Values:
1linkProtection
2nodeProtection
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.3
fsMplsFrrConstSetupPrio
Indicates the setup priority of the detour LSP
or bypass tunnel.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.4
fsMplsFrrConstHoldingPrio
Indicates the holding priority for detour LSP
or bypass tunnel.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.5
fsMplsFrrConstSEStyle
Indicates the SE style desired. This will be TRUE when
facility backup method is desired. One to One backup method
can be made sender template specific by setting this style TRUE.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.6
fsMplsFrrConstInclAnyAffinity
Indicates the include-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-any constraint if and only if the constraint
is zero, or the link and the constraint have a
resource class in c…
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.7
fsMplsFrrConstInclAllAffinity
Indicates the include-all link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-all constraint if and only if the link contains
all of the administrative groups specified in the
constraint.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.8
fsMplsFrrConstExclAnyAffinity
Indicates the exclude-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
exclude-any constraint if and only if the link contains
none of the administrative groups specified in the
constraint.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.9
fsMplsFrrConstHopLimit
The maximum number of hops that the detour LSP or
bypass tunnel may traverse.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.10
fsMplsFrrConstBandwidth
The maximum bandwidth specifically reserved for detour
LSP or bypass tunnel, in units of thousands of bits
per second (Kbps). Note that setting this value to 0
indicates best-effort treatment.
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.11
fsMplsFrrConstRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.13.3.2.1.1.1.12

fsMplsTunnelExtTable

table
.1.3.6.1.4.1.2076.13.3.2.1.2 · 1 row entry · 17 columns
Open in standard view 
This table is an extension to mplsTunnelTable. This Table
performs the association of tunnels to an interface, 
association of Protected Tunnel with that of backup tunnel,
and shows the status of the backup tunnels.
fsMplsTunnelExtEntry entry .1.3.6.1.4.1.2076.13.3.2.1.2.1
An entry in this table represents an extension to
mplsTunnelTable.
Indexes
No indexes recorded
Column Syntax OID
fsMplsTunnelExtProtIfIndex
Uniquely identifies an interface which a fast reroute
protection tunnel is configured to potentially protect
in the event of a fault.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.1
fsMplsTunnelExtProtectionType
Indicates type of the resource protection:

none(0) indicates default value this will be used
when tunnel is not supporting facility backups.

linkProtection(1) indicates that this tunnel i…
Enumeration
Enumerated Values:
0none
1linkProtection
2nodeProtection
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.2
fsMplsTunnelExtBkpTunIdx
Denotes Backup Tunnel Index for the Tunnel in mplsTunnelTable.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.3
fsMplsTunnelExtBkpInst
Denotes Backup Tunnel Instance for the Tunnel in mplsTunnelTable.

- lower 16 bits : protected tunnel instance
- higher 16 bits: detour instance
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.4
fsMplsTunnelExtBkpIngrLSRId
Denotes Backup Tunnel Ingress LSR ID for the Tunnel in mplsTunnelTable.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.5
fsMplsTunnelExtBkpEgrLSRId
Denotes Backup Tunnel Egress LSR ID for the Tunnel in mplsTunnelTable.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.6
fsMplsTunnelExtOne2OnePlrId
This value represents the PLR that has initiated a detour LSP
to protect a tunnel instance.
This value is signalled via the DETOUR object defined in MPLS
RSVP protocol as described in RFC-4090.
MPLS-TC-STD-MIBMplsLsrIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.7
fsMplsTunnelExtOne2OnePlrSenderAddrType
Denotes the address type of this detour instance's sender address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.8
fsMplsTunnelExtOne2OnePlrSenderAddr
The IP address of the PLR which has initiated the detour LSP.
The type of this address is determined by the value of the
fsMplsTunnelExtOne2OnePlrSenderAddrType object.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.9
fsMplsTunnelExtOne2OnePlrAvoidNAddrType
Denotes the address type of the node that this PLR tries to
avoid.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.10
fsMplsTunnelExtOne2OnePlrAvoidNAddr
The IP address of the node that this PLR tries to avoid.
The type of this address is determined by the value of the
fsMplsTunnelExtOne2OnePlrAvoidNAddrType object.
This value is signalled via the DETOUR object defined i…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.11
fsMplsTunnelExtDetourActive
Indicates whether or not the main LSP has switched over to
this detour LSP. This is only relevant for detours
originated by this node.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.12
fsMplsTunnelExtDetourMerging
This value represents whether or not this detour is merged.
This value MUST be set to none(1) if this detour is not
merged.

This value MUST be set to protectedTunnel(2) if this detour is
merged with the p…
Enumeration
Enumerated Values:
1none
2protectedTunnel
3detour
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.13
fsMplsTunnelExtFacRouteDBProtTunStatus
Specifies the state of the protected tunnel.

active This tunnel's label has been placed in the
LFIB and is ready to be applied to incoming
packets.

ready - This tunnel's…
Enumeration
Enumerated Values:
1active
2ready
3partial
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.14
fsMplsTunnelExtFacRouteDBProtTunResvBw
Specifies the amount of bandwidth in units
of '1,000 bits per second', actually reserved by
the protection tunnel for facility backup purposes.
This value is repeated here from the
MPLS-TE-STD-MIB MIB module because the…
kilobits per secondMPLS-TC-STD-MIBMplsBitRate
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.15
fsMplsTunnelExtProtectionMethod
Indicates type of the protection method in use:

oneToOneBackup(1) indicates OneToOne Backup method
is used.

facilityBackup(2) indicates facility backup method
is used.
Enumeration
Enumerated Values:
1oneToOneBackup
2facilityBackup
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.16
fsMplsTunnelExtMaxGblRevertTime
The Maximum Time after which the re-optimization of LSP begins
for the FRR Protected LSP in case of link/node failure detection.
It is specified in milli seconds.
SNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.13.3.2.1.2.1.17

fsMplsBypassTunnelIfTable

table
.1.3.6.1.4.1.2076.13.3.2.1.3 · 1 row entry · 5 columns
Open in standard view 
This table associates the tunnel to an interface to be 
used as a Backup Tunnel for a protected tunnelin case of 
facility backup method. This Table is applicable only in
case of Fast ReRoute Support.
fsMplsBypassTunnelIfEntry entry .1.3.6.1.4.1.2076.13.3.2.1.3.1
An entry in this table represents the association of
the tunnel to an interface to be used as a backup tunnel for
fast reroute supported tunnel in case of facility backup method.
The Bypass Tunnel associate…
Indexes
fsMplsBypassTunnelIfIndex fsMplsBypassTunnelIndex fsMplsBypassTunnelIngressLSRId fsMplsBypassTunnelEgressLSRId
Column Syntax OID
fsMplsBypassTunnelIfIndex
Uniquely identifies an interface to which a Bypass Tunnel is
associated to protect a Fast ReRoute Supported Tunnel in the
event of a fault. It is the primary index to this table.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.13.3.2.1.3.1.1
fsMplsBypassTunnelIndex
Uniquely identifies the Tunnel index of the Bypass Tunnel used
to protect a Fast ReRoute Supported Tunnel in the even of fault.
It is a secondary index to this table. This Object
should have an entry in mplsTunnelEntr…
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2076.13.3.2.1.3.1.2
fsMplsBypassTunnelIngressLSRId
Uniquely identifies the Tunnel Ingress LSR ID of the Bypass Tunnel
used to protect a Fast ReRoute Supported Tunnel in the even of fault.
It is a secondary index to this table. This Object should have an
entry in mplsT…
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.3.1.3
fsMplsBypassTunnelEgressLSRId
Uniquely identifies the Tunnel Egress LSR ID of the Bypass Tunnel
used to protect a Fast ReRoute Supported Tunnel in the even of fault.
It is a secondary index to this table. This Object should have an
entry in mplsTu…
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.3.1.4
fsMplsBypassTunnelRowStatus
This variable is used to create and delete a row in this table.
The Only Operations supported in this table are Create and Go
and Destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.13.3.2.1.3.1.5

fsMplsFrrTunARHopTable

table
.1.3.6.1.4.1.2076.13.3.2.1.4 · 1 row entry · 4 columns
Open in standard view 
This table sparsely extends mplsTunnelARHopTable defined
in the MPLS-TE-STD-MIB MIB module with fast-reroute objects.
These objects specify the status of local protection including
availability and active use, on a per-hop basis, of hops
traversed by a protected tunnel.  Note that object
availability in this table is governed by the support of
the Record Route Object in the RSVP-TE signaling of the
implementation.
fsMplsFrrTunARHopEntry entry .1.3.6.1.4.1.2076.13.3.2.1.4.1
This entry contains fast-reroute protection status of a single
protected tunnel hop.
Indexes
MPLS-TE-STD-MIBmplsTunnelARHopListIndex MPLS-TE-STD-MIBmplsTunnelARHopIndex
Column Syntax OID
fsMplsFrrTunARHopProtectType
This object indicates the protection type or types of the
associated path hop object. Note that since this object is a
BITS type, one, none or all of the bits may be set to indicate
various combinations of protection t…
Bits
Enumerated Values:
0path
1node
2link
 .1.3.6.1.4.1.2076.13.3.2.1.4.1.1
fsMplsFrrTunARHopProtectTypeInUse
This object indicates the protection type or types that are
currently in use by the associated path hop object.
Note that since this object is a BITS type, one, none or all
of the bits may be set to indicate various com…
Bits
Enumerated Values:
0path
1node
2link
 .1.3.6.1.4.1.2076.13.3.2.1.4.1.2
fsMplsFrrTunARHopLabel
This label indicates the downstream node label used incase of
fast reroute facility backup method is desired by the LSP
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.13.3.2.1.4.1.3
fsMplsFrrTunARBwProtAvailable
This Object indicates whether bandwidth protection is
available on this node.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.13.3.2.1.4.1.4