fsMplsFrrConstEntry
ARICENT-MPLS-FRR-MIB ·
.1.3.6.1.4.1.2076.13.3.2.1.1.1
Object
row
An entry in this table represents detour LSP or bypass
tunnel setup constraints for a tunnel instance to be
protected by detour LSPs or a bypass tunnel.
Agents must only allow entries in this table to be
created for tunnel instances that require fast-reroute
as indicated by the presense of the FAST_REROUTE Object
in the signaling for the LSP in question, as speciifed
in section 4.1 of RFC4090.
Entries indexed with fsMplsFrrConstIfIndex set to 0 apply to
all interfaces on this device for which the FRR feature can
operate.
Note that as per [RFC3812] the mplsTunnelInstance object
set to a value of 0 indicates that the mplsTunnelEntry
contains at a tunnel ingress. This is typically how
configuration of this feature is performed on devices
where the actual protection LSP used is left up to the
protecting tunnel. However, in cases where static
configuration is possible, any valid tunnel
instance is possible; however, in these cases, it is
STRONGLY RECOMMENDED that the instance index SHOULD
use the following convention to identify backup LSPs:
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros
Context
- MIB
- ARICENT-MPLS-FRR-MIB
- OID
.1.3.6.1.4.1.2076.13.3.2.1.1.1- Type
- row
- Status
- current
- Parent
- fsMplsFrrConstTable
- Table
- fsMplsFrrConstTable
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsFrrConstIfIndex Uniquely identifies an interface which a fast reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicates th… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2076.13.3.2.1.1.1.1 |
| fsMplsFrrConstHopLimit The maximum number of hops that the detour LSP or
bypass tunnel may traverse. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.13.3.2.1.1.1.10 |
| fsMplsFrrConstBandwidth The maximum bandwidth specifically reserved for detour
LSP or bypass tunnel, in units of thousands of bits
per second (Kbps). Note that setting this value to 0
indicates best-effo… | column | kilobits per second MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.4.1.2076.13.3.2.1.1.1.11 |
| fsMplsFrrConstRowStatus This variable is used to create, modify, and/or
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.13.3.2.1.1.1.12 |
| fsMplsFrrConstProtectionMethod This object indicates which protection method is to be used for fast
reroute on the device. Some devices requires a reboot
if this variable is to take affect after being modified. | column | Enumeration | .1.3.6.1.4.1.2076.13.3.2.1.1.1.2 |
| fsMplsFrrConstProtectionType Indicates type of the resource protection:
linkProtection(1) indicates that this tunnel is
setup to protect a particular link's resources.
nodeProt… | column | Enumeration | .1.3.6.1.4.1.2076.13.3.2.1.1.1.3 |
| fsMplsFrrConstSetupPrio Indicates the setup priority of the detour LSP
or bypass tunnel. | column | Unsigned32 | .1.3.6.1.4.1.2076.13.3.2.1.1.1.4 |
| fsMplsFrrConstHoldingPrio Indicates the holding priority for detour LSP
or bypass tunnel. | column | Unsigned32 | .1.3.6.1.4.1.2076.13.3.2.1.1.1.5 |
| fsMplsFrrConstSEStyle Indicates the SE style desired. This will be TRUE when
facility backup method is desired. One to One backup method
can be made sender template specific by setting this style TRU… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.13.3.2.1.1.1.6 |
| fsMplsFrrConstInclAnyAffinity Indicates the include-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-any constraint if and only if the constraint
is zero, or the link and t… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.4.1.2076.13.3.2.1.1.1.7 |
| fsMplsFrrConstInclAllAffinity Indicates the include-all link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-all constraint if and only if the link contains
all of the administrati… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.4.1.2076.13.3.2.1.1.1.8 |
| fsMplsFrrConstExclAnyAffinity Indicates the exclude-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
exclude-any constraint if and only if the link contains
none of the administrat… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.4.1.2076.13.3.2.1.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| MPLS-TE-STD-MIBmplsTunnelIndex Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading
mplsTunnelInde… | column | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.2.1.10.166.3.2.2.1.1 |
| MPLS-TE-STD-MIBmplsTunnelInstance Uniquely identifies a particular instance of a
tunnel between a pair of ingress and egress LSRs.
It is useful to identify multiple instances of
tunnels for the purposes of backup … | column | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.2.1.10.166.3.2.2.1.2 |
| MPLS-TE-STD-MIBmplsTunnelIngressLSRId Identity of the ingress LSR associated with this
tunnel instance. When the MPLS signalling protocol
is rsvp(2) this value SHOULD be equal to the Tunnel
Sender Addre… | column | MPLS-TC-STD-MIBMplsExtendedTunnelId | .1.3.6.1.2.1.10.166.3.2.2.1.3 |
| MPLS-TE-STD-MIBmplsTunnelEgressLSRId Identity of the egress LSR associated with this
tunnel instance. | column | MPLS-TC-STD-MIBMplsExtendedTunnelId | .1.3.6.1.2.1.10.166.3.2.2.1.4 |