ARICENT-ESAT-CFG-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
51
fsEsatSlaTable
table.1.3.6.1.4.1.29601.2.88.3
·
1 row entry
·
14 columns
This table contains ESAT SLA configurations.
This entry contains information about a particular ESAT SLA
Configuration.
Configuration.
Indexes
fsEsatSlaId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
fsEsatSlaId
This object specifies the ESAT Service Level Agreement Identifier. This is a free running index used to
identify a SLA. |
Unsigned32 Constraints: range: 1-255 |
.1.3.6.1.4.1.29601.2.88.3.1.1 |
||||||||||||
|
fsEsatSlaIfIndex
This object specifies the Interface Index on which the ESAT test is performed.
|
IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.29601.2.88.3.1.2 |
||||||||||||
|
fsEsatSlaEvcIndex
This object specifies the service under test. The EVC is configured
using the MEF MIB. Internally this object refers to fsEvcIndex in MEF MIB. |
Q-BRIDGE-MIBVlanIdr/w Textual Convention: Q-BRIDGE-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.29601.2.88.3.1.3 |
||||||||||||
|
fsEsatSlaMEG
This object specifies the Maintenance Entity Group (MEG) of the fsEsatSlaEntry.
Internally this object refers to MIB object dot1agCfmMdIndex of ECFM 802.1ag standard. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.29601.2.88.3.1.4 |
||||||||||||
|
fsEsatSlaME
This object specifies the Maintenance Entity (ME) of the fsEsatSlaEntry.
Internally this object refers to MIB object dot1agCfmMaIndex of ECFM 802.1ag standard. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.29601.2.88.3.1.5 |
||||||||||||
|
fsEsatSlaMEP
This object specifies the Maintenance Association End Point (MEP) of the
fsEsatSlaEntry. Internally this object refers to MIB object dot1agCfmMepIdentifier of ECFM 802.1ag standard. |
Unsigned32r/w Constraints: range: 1-8191 |
.1.3.6.1.4.1.29601.2.88.3.1.6 |
||||||||||||
|
fsEsatSlaRateStep
This object specifies the step load CIR (Committed Information Rate) configuration test.
If no value is provided, 25% of CIR is sent first, followed by 50% of CIR and so on; the complete CIR is generated in 4 steps. F… |
Integer32r/w Constraints: range: 10-100 |
.1.3.6.1.4.1.29601.2.88.3.1.7 |
||||||||||||
|
fsEsatSlaFreqDelay
This object specifies the delay in seconds between each packet part of the traffic generation.
|
Integer32r/w Constraints: range: 0-60 |
.1.3.6.1.4.1.29601.2.88.3.1.8 |
||||||||||||
|
fsEsatSlaDuration
This object specifies the duration of the complete Ethernet Service Activation Test in seconds.
For CIR configuration test, the CIR traffic is generated for the configured duration. For step load CIR configuration test… |
Integer32r/w Constraints: range: 1-3600 |
.1.3.6.1.4.1.29601.2.88.3.1.9 |
||||||||||||
|
fsEsatSlaDirection
This object specifies the direction of the measurements . In a bridge, the
performance measurements can be done either at user-to-network interface (UNI)port or network-to-network interface (NNI) port. If the direction… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.29601.2.88.3.1.10 |
||||||||||||
|
fsEsatSlaTrafProfileId
This object specifies the Traffic Profile to which the SLA is currently mapped. Multiple
packet profiles can be created and each can be associated to a given SLA. Each packet profile contains packet information such a… |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.29601.2.88.3.1.11 |
||||||||||||
|
fsEsatSlaSacId
This object specifies the Service Acceptance Criteria to which the SLA is currently mapped.
Multiple SACs can be created and each can be associated to a given SLA. Each SAC refers to the minimum Information rate, frame … |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.29601.2.88.3.1.12 |
||||||||||||
|
fsEsatSlaStatus
This object specifies the ESAT SLA status. It is used to start or stop the SLA under test.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.29601.2.88.3.1.13 |
||||||||||||
|
fsEsatSlaRowStatus
This object specifies the row status and is used to create or
deletea new entry by setting this object to the appropriate value as mentioned in SMI-v2. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.29601.2.88.3.1.14 |
fsEsatTrafProfTable
table.1.3.6.1.4.1.29601.2.88.4
·
1 row entry
·
12 columns
This table contains Traffic Profile configurations.
This entry contains information about a particular Traffic Profile configuration.
Indexes
fsEsatTrafProfId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
fsEsatTrafProfId
This object specifies the ESAT Traffic Profile Identifier. This is a free running index.
|
Unsigned32 Constraints: range: 1-255 |
.1.3.6.1.4.1.29601.2.88.4.1.1 |
||||||||||||
|
fsEsatTrafProfDir
This object specifies the direction of ESAT Traffic Profile Generation. When this object is set as external,
the traffic is generated at the wire-side of network-to-network interface (NNI) and is transmitted to the re… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.29601.2.88.4.1.2 |
||||||||||||
|
fsEsatTrafProfTagType
This object specifies the type of ESAT vlan tag to be used for Traffic Profile Generation. This
specifies the type of packet to be used to generate traffic. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.29601.2.88.4.1.3 |
||||||||||||
|
fsEsatTrafProfInVlan
This object specifies the the VLAN ID for the inner vlan
tag of the interface from which the message will be sent. This is applicable if the fsEsatTrafProfTagType is single tagged or double tagged. |
Q-BRIDGE-MIBVlanIdr/w Textual Convention: Q-BRIDGE-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.29601.2.88.4.1.4 |
||||||||||||
|
fsEsatTrafProfOutVlan
This object specifies the ESAT Outer VLAN ID to be used as part of profile frame. This is applicable
if the fsEsatTrafProfTagType is double tagged. |
Q-BRIDGE-MIBVlanIdr/w Textual Convention: Q-BRIDGE-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.29601.2.88.4.1.5 |
||||||||||||
|
fsEsatTrafProfInCos
This object specifies the class of service (CoS) value
for the inner VLAN tag of the interface from which the message will be sent. This is applicable if the fsEsatTrafProfTagType is single tagged, double tagged or pr… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.29601.2.88.4.1.6 |
||||||||||||
|
fsEsatTrafProfOutCos
This object specifies the ESAT Outer Class of Service to be used as part of profile frame. This
is applicable if the fsEsatTrafProfTagType is double tagged |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.29601.2.88.4.1.7 |
||||||||||||
|
fsEsatTrafProfPktSize
This object specifies the ESAT Traffic Profile Packet Size in bytes.
|
Integer32r/w Constraints: range: 64-1518 |
.1.3.6.1.4.1.29601.2.88.4.1.8 |
||||||||||||
|
fsEsatTrafProfSrcMac
This object specifies the ESAT Source MAC address in the packet profile.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.29601.2.88.4.1.9 |
||||||||||||
|
fsEsatTrafProfDestMac
This object specifies the ESAT Destination MAC address in the packet profile.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.29601.2.88.4.1.10 |
||||||||||||
|
fsEsatTrafProfPayload
This object specifies the ESAT Payload in the packet profile.
|
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.29601.2.88.4.1.11 |
||||||||||||
|
fsEsatTrafProfRowStatus
This object sp;ecifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as
mentioned in SMI-v2. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.29601.2.88.4.1.12 |
fsEsatSacTable
table.1.3.6.1.4.1.29601.2.88.5
·
1 row entry
·
6 columns
This table contains Service Acceptance Criteria Profile configuration. Service Acceptance Criteria (SAC) is a set of criteria used to ensure that a service meets its functionality and quality requirement and that the service is ready to operate when it has been deployed.
This entry contains information about a particular SAC Profile configuration.
Indexes
fsEsatSacId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
fsEsatSacId
This object specifies the ESAT SAC Identifier used to identify a particular
SAC entry. |
Unsigned32 Constraints: range: 1-255 |
.1.3.6.1.4.1.29601.2.88.5.1.1 |
||||||||||||
|
fsEsatSacInfoRate
This object specifies the ESAT Information Rate configured as part of this SAC. This is
the minimum Information Rate above which a test is declared fail. Information rate is a bit rate measure of available or consumed… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.5.1.2 |
||||||||||||
|
fsEsatSacFrLossRatio
This object specifies the ESAT Frame Loss Ratio (FLR) configured as part of this SAC. This is
the minimum frame loss ratio above which a test is declared fail. Frame Loss Ratio measures the number of packets lost over… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.29601.2.88.5.1.3 |
||||||||||||
|
fsEsatSacFrTxDelay
This object specifies the ESAT Frame Transfer Delay (FTD)configured as part of this SAC. This is
the minimum frame transfer delay (in milliseconds)above which a test is declared fail. Frame Transfer delay measures the… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.5.1.4 |
||||||||||||
|
fsEsatSacFrDelayVar
This object specifies the ESAT Frame Delay Variation configured as part of this SAC. This is
the minimum frame delay variation (in milliseconds) above which a test is declared fail. Frame Delay Variation (FDV) measure… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.5.1.5 |
||||||||||||
|
fsEsatSacRowStatus
This object specifies the row status and is used to create or delete a new entry by setting this object to the appropriate value as
mentioned in SMI-v2. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.29601.2.88.5.1.6 |
fsEsatStatsTable
table.1.3.6.1.4.1.29601.2.88.6
·
1 row entry
·
19 columns
This table contains the statistics of the SLA operation performed.
This entry specifies the statistics about a particular step in the SLA operation performed.
Indexes
fsEsatSlaId fsEsatStatsStepId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
fsEsatStatsStepId
This object specifies the ESAT Step Index in SLA operation statistics. A report is generated for each
fsEsatSlaRateStep configured.. CIR configuration testis performed only in one step. |
Integer32 Constraints: range: 1-10 |
.1.3.6.1.4.1.29601.2.88.6.1.1 |
||||
|
fsEsatStatsResult
This oject specifies the step result for Ethernet Service Activation Test
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.29601.2.88.6.1.2 |
||||
|
fsEsatStatsDuration
This object specifies the duration of the step of Ethernet Service Activation Test
. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.29601.2.88.6.1.3 |
||||
|
fsEsatStatsTxPkts
This object specifies the number of packets transmitted during the step test. If the
target does not support this counter, this value is maintanined as zero |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.29601.2.88.6.1.4 |
||||
|
fsEsatStatsTxBytes
This object specifies the number of bytes transmitted during the step test. If the
target does not support this counter, this value is maintanined as zero |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.29601.2.88.6.1.5 |
||||
|
fsEsatStatsRxPkts
This object specifies the number of packets received during the step test. If the
target does not support this counter, this value is maintained as zero |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.29601.2.88.6.1.6 |
||||
|
fsEsatStatsRxBytes
This object specifies the number of bytes received during the step test. If the
target does not support this counter, value shall be zero |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.29601.2.88.6.1.7 |
||||
|
fsEsatStatsIrMin
This object specifies the Minimum Information Rate for the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.8 |
||||
|
fsEsatStatsIrMean
This object specifies the Mean Information Rate for the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.9 |
||||
|
fsEsatStatsIrMax
This object specifies the Maximum Information Rate for step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.10 |
||||
|
fsEsatStatsFrLossCnt
This object specifies the number of frames lost during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.11 |
||||
|
fsEsatStatsFrLossRatio
This object specifies the Frame Loss Ratio observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.12 |
||||
|
fsEsatStatsFrTxDelayMin
This object specifies the Minimum Frame Transfer Delay observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.13 |
||||
|
fsEsatStatsFrTxDelayMean
This object specifies the Mean Frame Transfer Delay observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.14 |
||||
|
fsEsatStatsFrTxDelayMax
This object specifies the Maximum Frame Transfer Delay observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.15 |
||||
|
fsEsatStatsFrDelayVarMin
This object specifies the Minimum Frame Delay Variation observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.16 |
||||
|
fsEsatStatsFrDelayVarMean
This object specifies the Mean Frame Delay Variation observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.17 |
||||
|
fsEsatStatsFrDelayVarMax
This object specifies the Maximum Frame Delay Variation observed during the step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.18 |
||||
|
fsEsatStatsPortStateCounter
This object specifies the number of times the port has toggled during each step test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.29601.2.88.6.1.19 |