fsEsatSlaSacId
ARICENT-ESAT-CFG-MIB ·
.1.3.6.1.4.1.29601.2.88.3.1.12
Object
column
r/w
Integer32
This object specifies the Service Acceptance Criteria to which the SLA is currently mapped. Multiple SACs can be created and each can be associated to a given SLA. Each SAC refers to the minimum Information rate, frame loss ratio, frame transmit delay, frame delay variation for the service under test.
Context
- MIB
- ARICENT-ESAT-CFG-MIB
- OID
.1.3.6.1.4.1.29601.2.88.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsEsatSlaEntry
- Table
- fsEsatSlaTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsEsatSlaId This object specifies the ESAT Service Level Agreement Identifier. This is a free running index used to
identify a SLA. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.3.1.1 |
| fsEsatSlaDirection This object specifies the direction of the measurements . In a bridge, the
performance measurements can be done either at user-to-network interface (UNI)port or network-to-network… | column | Enumeration | .1.3.6.1.4.1.29601.2.88.3.1.10 |
| fsEsatSlaTrafProfileId This object specifies the Traffic Profile to which the SLA is currently mapped. Multiple
packet profiles can be created and each can be associated to a
given SLA. Each packet pr… | column | Integer32 | .1.3.6.1.4.1.29601.2.88.3.1.11 |
| fsEsatSlaStatus This object specifies the ESAT SLA status. It is used to start or stop the SLA under test. | column | Enumeration | .1.3.6.1.4.1.29601.2.88.3.1.13 |
| fsEsatSlaRowStatus This object specifies the row status and is used to create or
deletea new entry by setting this object to the appropriate value as
mentioned in SMI-v2. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.88.3.1.14 |
| fsEsatSlaIfIndex This object specifies the Interface Index on which the ESAT test is performed. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.29601.2.88.3.1.2 |
| fsEsatSlaEvcIndex This object specifies the service under test. The EVC is configured
using the MEF MIB. Internally this object refers to
fsEvcIndex in MEF MIB. | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.29601.2.88.3.1.3 |
| fsEsatSlaMEG This object specifies the Maintenance Entity Group (MEG) of the fsEsatSlaEntry.
Internally this object refers to MIB object dot1agCfmMdIndex
of ECFM 802.1ag standard. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.88.3.1.4 |
| fsEsatSlaME This object specifies the Maintenance Entity (ME) of the fsEsatSlaEntry.
Internally this object refers to MIB object dot1agCfmMaIndex
of ECFM 802.1ag standard. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.88.3.1.5 |
| fsEsatSlaMEP This object specifies the Maintenance Association End Point (MEP) of the
fsEsatSlaEntry. Internally this object refers to MIB object
dot1agCfmMepIdentifier of ECFM 802.1ag stand… | column | Unsigned32 | .1.3.6.1.4.1.29601.2.88.3.1.6 |
| fsEsatSlaRateStep This object specifies the step load CIR (Committed Information Rate) configuration test.
If no value is provided, 25% of CIR is sent first, followed by 50% of CIR
and so on; the … | column | Integer32 | .1.3.6.1.4.1.29601.2.88.3.1.7 |
| fsEsatSlaFreqDelay This object specifies the delay in seconds between each packet part of the traffic generation. | column | Integer32 | .1.3.6.1.4.1.29601.2.88.3.1.8 |
| fsEsatSlaDuration This object specifies the duration of the complete Ethernet Service Activation Test in seconds.
For CIR configuration test, the CIR traffic is generated for the configured
durati… | column | Integer32 | .1.3.6.1.4.1.29601.2.88.3.1.9 |