ARICENT-DCB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
90

fsDcbPortTable

table
.1.3.6.1.4.1.29601.2.22.2.1 · 1 row entry · 9 columns
Open in standard view 
Port table contains the DCB features 
(Enhanced Transmission Selection/Priortiy Based Flow Control/Application priority) 
status (enabled or disabled) and DCBX version details
fsDcbPortEntry entry .1.3.6.1.4.1.29601.2.22.2.1.1
An entry containing DCB control parameters for a particular port.
Indexes
fsDcbPortNumber
Column Syntax OID
fsDcbPortNumber
This indicates the interface identifier for which the Dcb
configuration is applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.22.2.1.1.1
fsDcbETSAdminStatus
This object enables or disables ETS feature on
the given port.

If set to 'enabled(1)', ETS feature will be enabled
on this port.

If set to 'disabled(2)', ETS feature will be disabled
on…
EnabledStatus
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.22.2.1.1.2
fsDcbPFCAdminStatus
This object enables or disables PFC feature on
the given port.

If set to 'enabled(1)', PFC feature will be enabled
on this port.

If set to 'disabled(2)', PFC feature will be disabled
on t…
EnabledStatus
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.22.2.1.1.3
fsDcbRowStatus
This object is used to create and delete a row in this table.

Only 'createAndGo', and 'destroy' values are allowed for this
object. 'createAndWait' and 'notInService' values are not allowed.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.22.2.1.1.4
fsDcbAppPriAdminStatus
This object enables or disables PFC feature on
the given port.

If set to 'enabled(1)', Application priority feature will be enabled
on this port.

If set to 'disabled(2)', Application prior…
EnabledStatus
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.22.2.1.1.5
fsDcbOperVersion
This object specifies the Operating version of the DCBX protocol
in which the system adjusts as needed to operate at the highest version
supported by both link partners.
DcbxVersion
Textual Convention: DcbxVersion Enumeration
Type Values:
1auto
2ieee
3cee
4unknown
 .1.3.6.1.4.1.29601.2.22.2.1.1.6
fsDcbMaxVersion
This object specifies the Highest DCBX protocol version supported
by the local system.
DcbxVersion
Textual Convention: DcbxVersion Enumeration
Type Values:
1auto
2ieee
3cee
4unknown
 .1.3.6.1.4.1.29601.2.22.2.1.1.7
fsDcbPeerOperVersion
This object specifies the Operating version of the DCBX protocol for
peer in which the system adjusts as needed to operate at the highest
version supported by both link partners.
DcbxVersion
Textual Convention: DcbxVersion Enumeration
Type Values:
1auto
2ieee
3cee
4unknown
 .1.3.6.1.4.1.29601.2.22.2.1.1.8
fsDcbPeerMaxVersion
This object specifies the Highest DCBX protocol version supported
by the peer system.
DcbxVersion
Textual Convention: DcbxVersion Enumeration
Type Values:
1auto
2ieee
3cee
4unknown
 .1.3.6.1.4.1.29601.2.22.2.1.1.9

fsDCBXPortTable

table
.1.3.6.1.4.1.29601.2.22.3.1.2 · 1 row entry · 3 columns
Open in standard view 
Port table contains the DCBX feature status (enabled or disabled).
fsDCBXPortEntry entry .1.3.6.1.4.1.29601.2.22.3.1.2.1
An entry containing DCBX control parameters for a particular port.
Indexes
fsDCBXPortNumber
Column Syntax OID
fsDCBXPortNumber
This indicates the interface identifier for which the DCBX
configuration is applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.22.3.1.2.1.1
fsDCBXAdminStatus
This object is used to enable or disable DCBX feature on
the given port.

If set to 'enabled(1)', DCBX feature will be enabled
on this port. This will start the state machine for
the feature for which t…
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.22.3.1.2.1.2
fsDCBXMode
This object specifies the mode of the DCBX in which the operating
version will be elected dynamically based on TLV exchange when the Auto
mode is selected.
In auto mode, operating version is determined based on
IEEE…
DcbxVersionr/w
Textual Convention: DcbxVersion Enumeration
Type Values:
1auto
2ieee
3cee
4unknown
 .1.3.6.1.4.1.29601.2.22.3.1.2.1.3

fsETSPortTable

table
.1.3.6.1.4.1.29601.2.22.3.2.2 · 1 row entry · 18 columns
Open in standard view 
ETS Port table contains the ETS (Enhanced Transmission Selection) features 
information specific to this port. 
          
 An entry created in this table in the following tables in the standard 
 DCBX MIB for this port.
 lldpXdot1dcbxConfigTCSupportedTable,
 lldpXdot1dcbxConfigETSConfigurationTable,
 lldpXdot1dcbxConfigETSRecommendationTable,
 lldpXdot1dcbxLocTCSupportedTable,
 lldpXdot1dcbxLocETSBasicConfigurationTable,
 lldpXdot1dcbxLocETSConPriorityAssignmentTable,
 lldpXdot1dcbxLocETSRecommendationTable,
 lldpXdot1dcbxAdminTCSupportedTable,
 lldpXdot1dcbxAdminETSBasicConfigurationTable,
 lldpXdot1dcbxAdminETSConPriorityAssignmentTable,
 lldpXdot1dcbxAdminETSRecommendationTable.
          
 Deletion of entry in this table deletes all the entries in the above tables 
 in the standard DCBX MIB for this port.
fsETSPortEntry entry .1.3.6.1.4.1.29601.2.22.3.2.2.1
An entry containing ETS control parameters and ETS information
for a particular port.
Indexes
fsETSPortNumber
Column Syntax OID
fsETSPortNumber
This indicates the interface identifier for which the ETS
configuration is applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.1
fsETSAdminMode
This object is used to configure administrative mode for ETS feature on
the given port.

If set to 'auto(0)', and if ETS feature is enabled
on this port then all the operational(local) parameters for
th…
DcbAdminModer/w
Textual Convention: DcbAdminMode Enumeration
Type Values:
0auto
1on
2off
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.2
fsETSDcbxOperState
This object is used to display the current state of the
DCBX state machine for the ETS feature on the given port.

If state is Off '(0)', then ETS Operational(local) parameters
will be same as ETS administ…
DcbState
Textual Convention: DcbState Enumeration
Type Values:
0off
1init
2rxrecommended
3ceedisabled
4uselocalcfg
5usepeercfg
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.3
fsETSDcbxStateMachine
This object is used to display the DCBX state machine
type that is used by the ETS feature on the given port.
DcbStateMachineType
Textual Convention: DcbStateMachineType Enumeration
Type Values:
1asymmetric
2symmetric
3feature
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.4
fsETSClearTLVCounters
This object when set to TRUE, clears the following counters
associated with a Port:
fsETSConfTxTLVCounter,
fsETSConfRxTLVCounter,
fsETSConfRxTLVErrors,
fsETSRecoTxTLVCounter,
fsETSRecoRxTLVCounter,…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.5
fsETSConfTxTLVCounter
This object is used to keep track of the number of ETS
configuration TLV that are transmitted from this port.
This counter will be incremented every time when there
is ETS Configuration TLV is generated and transmitt…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.6
fsETSConfRxTLVCounter
This object is used to keep track of the number of ETS
ConfigurationTLV that are received in this port. This
counter will be incremented every time when there is ETS
Configuration TLV is received from the LLDP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.7
fsETSConfRxTLVErrors
This object is used to keep track of number of malformed
ETS Configuration TLVs received by ETS. This counter will be
incremented every time a ETS Configuration TLV is dropped by ETS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.8
fsETSRecoTxTLVCounter
This object is used to keep track of the number of ETS
Recommendation TLV that are transmitted from this port.
This counter will be incremented every time when there
is ETS Recommendation TLV is generated and transmi…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.9
fsETSRecoRxTLVCounter
This object is used to keep track of the number of ETS
Recommendation TLV that are received in this port. This
counter will be incremented every time when there is ETS
Recommendation TLV is received from the LLDP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.10
fsETSRecoRxTLVErrors
This object is used to keep track of number of malformed
ETS Recommendation TLVs received by ETS. This counter will be
incremented every time a ETS Recommendation TLV is dropped by ETS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.11
fsETSTcSuppTxTLVCounter
This object is used to keep track of the number of TC
Supported TLV that are transmitted from this port.
This counter will be incremented every time when there
is TC Supported TLV is generated and transmitted
to the…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.12
fsETSTcSuppRxTLVCounter
This object is used to keep track of the number of TC
Supported TLV that are received in this port. This
counter will be incremented every time when there is TC
Supported TLV is received from the LLDP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.13
fsETSTcSuppRxTLVErrors
This object is used to keep track of number of malformed
TC Supported TLVs received by ETS. This counter will be
incremented every time a TC Supported TLV is dropped by ETS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.14
fsETSRowStatus
This object is used to create and delete a row in this table.

Only 'createAndGo', and 'destroy' values are allowed for this
object. 'createAndWait' and 'notInService' values are not allowed.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.15
fsETSSyncd
This object indicates whether the current DesiredConfig has been
received by the peer, and is applicable only when the DCBX operating
version is CEE
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.16
fsETSError
This object indicates that an error has occurred during the
configuration exchange with the peer. Error is also set to TRUE when the
Compatible method for the feature fails. This object is applicable only
when the DC…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.17
fsETSDcbxStatus
This object indicates the current DCBX status of the ETS feature .
DcbxStatus
Textual Convention: DcbxStatus Enumeration
Type Values:
1peerNotAdvFeat
2peerNotAdvDcbx
3notAdvertise
4disabled
5peerDisabled
6peerInError
7peerNWillingCompatibleCfg
8cfgNotCompatible
9ok
10unknown
 .1.3.6.1.4.1.29601.2.22.3.2.2.1.18

fsPFCPortTable

table
.1.3.6.1.4.1.29601.2.22.3.3.2 · 1 row entry · 32 columns
Open in standard view 
PFC Port table contains the PFC (Priortiy Based Flow Control) features 
information specific to this port. 
          
 An entry created in the port table populates the entry in this table and 
 in the following tables in the standard DCBX Mib for this port. 
 lldpXdot1dcbxConfigPFCTable,
 lldpXdot1dcbxLocPFCBasicTable,
 lldpXdot1dcbxLocPFCEnableTable,
 lldpXdot1dcbxAdminPFCBasicTable,
 lldpXdot1dcbxAdminPFCEnableTable.
           
 Deletion of entry in the port table deletes the entry in this table and
 all the entries in the above tables in the standard DCBX mib for this port.
fsPFCPortEntry entry .1.3.6.1.4.1.29601.2.22.3.3.2.1
An entry containing PFC control parameters and PFC information
for a particular port.
Indexes
fsPFCPortNumber
Column Syntax OID
fsPFCPortNumber
This indicates the interface identifier for which the PFC
configuration is applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.1
fsPFCAdminMode
This object is used to configure administrative mode for PFC feature on
the given port.

If set to 'auto(0)', and if PFC feature is enabled
on this port then all the opertaional(local) parameters for
th…
DcbAdminModer/w
Textual Convention: DcbAdminMode Enumeration
Type Values:
0auto
1on
2off
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.2
fsPFCDcbxOperState
This object is used to display the current state of the
DCBX state machine for the PFC feature on the given port.

If state is Off '(1)', then PFC Operational(local) parameters
will be same as PFC administ…
DcbState
Textual Convention: DcbState Enumeration
Type Values:
0off
1init
2rxrecommended
3ceedisabled
4uselocalcfg
5usepeercfg
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.3
fsPFCDcbxStateMachine
This object is used to display the DCBX state machine
type that is used by the PFC feature on the given port.
DcbStateMachineType
Textual Convention: DcbStateMachineType Enumeration
Type Values:
1asymmetric
2symmetric
3feature
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.4
fsPFCClearTLVCounters
This object when set to TRUE, clears the following counters
associated with a Port:
fsPFCTxTLVCounter,
fsPFCRxTLVCounter,
fsPFCRxTLVErrors.

Setting this object to FALSE has no effect.
This ob…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.5
fsPFCTxTLVCounter
This object is used to keep track of the number of PFC TLV
that are transmitted from this port. This counter will be
incremented every time when there is PFC TLV is generated
and transmitted to the LLDP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.6
fsPFCRxTLVCounter
This object is used to keep track of the number of PFC TLV
that are received in this port. This counter will be
incremented every time when there is PFC TLV is received
from the LLDP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.7
fsPFCRxTLVErrors
This object is used to keep track of number of malformed TLVs received by PFC.
This counter will be incremented every time a PFC-TLV is dropped by PFC.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.8
fsPFCRowStatus
This object is used to create and delete a row in this table.

Only 'createAndGo', and 'destroy' values are allowed for this
object. 'createAndWait' and 'notInService' values are not allowed.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.9
fsPFCSyncd
This object indicates whether the current DesiredConfig has been
received by the peer, and is applicable only when the DCBX operating
version is CEE
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.10
fsPFCError
This object indicates that an error has occurred during the
configuration exchange with the peer. Error is also set to TRUE when the
Compatible method for the feature fails.This object is applicable only
when the DCB…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.11
fsPFCDcbxStatus
This object indicates the current DCBX status of the PFC feature .
DcbxStatus
Textual Convention: DcbxStatus Enumeration
Type Values:
1peerNotAdvFeat
2peerNotAdvDcbx
3notAdvertise
4disabled
5peerDisabled
6peerInError
7peerNWillingCompatibleCfg
8cfgNotCompatible
9ok
10unknown
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.12
fsPFCRxPauseFrameCounter
This object is used to keep track of total number of PFC Control Frame
that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.13
fsPFCTxPauseFrameCounter
This object is used to keep track of total number of PFC Control Frames
that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.14
fsPFCRxPauseFrameP0Counter
This object is used to keep track of number of PFC Control Frames
with Priority 0 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.15
fsPFCRxPauseFrameP1Counter
This object is used to keep track of number of PFC Control Frames
with Priority 1 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.16
fsPFCRxPauseFrameP2Counter
This object is used to keep track of number of PFC Control Frames
with Priority 2 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.17
fsPFCRxPauseFrameP3Counter
This object is used to keep track of number of PFC Control Frames
with Priority 3 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.18
fsPFCRxPauseFrameP4Counter
This object is used to keep track of number of PFC Control Frames
with Priority 4 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.19
fsPFCRxPauseFrameP5Counter
This object is used to keep track of number of PFC Control Frames
with Priority 5 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.20
fsPFCRxPauseFrameP6Counter
This object is used to keep track of number of PFC Control Frames
with Priority 6 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.21
fsPFCRxPauseFrameP7Counter
This object is used to keep track of number of PFC Control Frames
with Priority 7 that are received in this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.22
fsPFCTxPauseFrameP0Counter
This object is used to keep track of number of PFC Control Frames
with Priority 0 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.23
fsPFCTxPauseFrameP1Counter
This object is used to keep track of number of PFC Control Frames
with Priority 1 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.24
fsPFCTxPauseFrameP2Counter
This object is used to keep track of number of PFC Control Frames
with Priority 2 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.25
fsPFCTxPauseFrameP3Counter
This object is used to keep track of number of PFC Control Frames
with Priority 3 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.26
fsPFCTxPauseFrameP4Counter
This object is used to keep track of number of PFC Control Frames
with Priority 4 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.27
fsPFCTxPauseFrameP5Counter
This object is used to keep track of number of PFC Control Frames
with Priority 5 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.28
fsPFCTxPauseFrameP6Counter
This object is used to keep track of number of PFC Control Frames
with Priority 6 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.29
fsPFCTxPauseFrameP7Counter
This object is used to keep track of number of PFC Control Frames
with Priority 7 that are transmitted from this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.30
fsPFCDataFrameDiscardCounter
This object is used to keep track of number of data frames discarded
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.31
fsPFCClearPauseFrameCounters
This object clears the following counters
associated with a Port when set to TRUE
fsPFCRxControlFrame,
fsPFCTxControlFrame,
fsPFCRxFramePriority0-7,
fsPFCTxFramePriority0-7.

Setting this o…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.3.2.1.32

fsAppPriPortTable

table
.1.3.6.1.4.1.29601.2.22.3.4.2 · 1 row entry · 13 columns
Open in standard view 
Application Priority Port table contains the application priority feature's 
information specific to this port. 
          
 An entry created in the port table populates the entry in this table and 
 in the following tables in the standard DCBX Mib for this port. 
 lldpXdot1dcbxConfigAppPriTable,
 lldpXdot1dcbxLocAppPriBasicTable,
 lldpXdot1dcbxLocAppPriEnableTable,
 lldpXdot1dcbxAdminAppPriBasicTable,
 lldpXdot1dcbxAdminAppPriEnableTable.
           
 Deletion of entry in the port table deletes the entry in this table and
 all the entries in the above tables in the standard DCBX mib for this port.
fsAppPriPortEntry entry .1.3.6.1.4.1.29601.2.22.3.4.2.1
An entry containing application priority control parameters and
application priority information for a particular port.
Indexes
fsAppPriPortNumber
Column Syntax OID
fsAppPriPortNumber
This indicates the interface identifier for which the application priority
configuration is applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.1
fsAppPriAdminMode
This object is used to configure the admin mode for application
priority feature on the given port.

- If this object is configured as 'auto(0)' on a port then all the
operational(local) parame…
DcbAdminModer/w
Textual Convention: DcbAdminMode Enumeration
Type Values:
0auto
1on
2off
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.2
fsAppPriDcbxOperState
This object is used to display the current state of the
DCBX state machine for the application priority feature on the given
port.

If state is Off '(1)', then application priority Operational(local)
para…
DcbState
Textual Convention: DcbState Enumeration
Type Values:
0off
1init
2rxrecommended
3ceedisabled
4uselocalcfg
5usepeercfg
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.3
fsAppPriDcbxStateMachine
This object is used to display the DCBX state machine type that is
used by the application priority feature on the given port.
DcbStateMachineType
Textual Convention: DcbStateMachineType Enumeration
Type Values:
1asymmetric
2symmetric
3feature
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.4
fsAppPriClearTLVCounters
This object when set to TRUE, clears the following counters
associated with this port and resets its value to FALSE:
fsAppPriTxTLVCounter,
fsAppPriRxTLVCounter,
fsAppPriRxTLVErrors.

Setting th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.5
fsAppPriTxTLVCounter
This object is used to keep track of the number of application
priority TLVs that are transmitted from the port. This counter will
be incremented every time an application priority TLV is generated
and transmitted to…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.6
fsAppPriRxTLVCounter
This object indicates the number of application priority
TLVs that are received in this port. This counter will be incremented
every time when there is application priority TLV is received from LLDP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.7
fsAppPriRxTLVErrors
This object indicates the number of malformed TLVs received by
application priority module. This counter will be incremented every
time an application priority TLV is dropped by the
application priority module.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.8
fsAppPriAppProtocols
This object indicates the total number of application priority
entries present in the last TLV received from its peer
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.9
fsAppPriRowStatus
This object is used to create and delete a row in this table.

Only 'createAndGo', and 'destroy' values are allowed for this
object. 'createAndWait' and 'notInService' values are not allowed.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.10
fsAppPriSyncd
This object indicates whether the current DesiredConfig has been
received by the peer. This object is applicable only when the DCBX
operating version is CEE
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.11
fsAppPriError
This object indicates that an error has occurred during the
configuration exchange with the peer. Error is also set to TRUE when the
Compatible method for the feature fails.This object is applicable only
when the DCB…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.12
fsAppPriDcbxStatus
This object indicates the current DCBx status of the Application
Priority feature.
DcbxStatus
Textual Convention: DcbxStatus Enumeration
Type Values:
1peerNotAdvFeat
2peerNotAdvDcbx
3notAdvertise
4disabled
5peerDisabled
6peerInError
7peerNWillingCompatibleCfg
8cfgNotCompatible
9ok
10unknown
 .1.3.6.1.4.1.29601.2.22.3.4.2.1.13

fsAppPriXAppTable

table
.1.3.6.1.4.1.29601.2.22.3.4.3 · 1 row entry · 1 columns
Open in standard view 
This table augments lldpXdot1dcbxAdminApplicationPriorityAppTable,
describing parameters of an application priority table.
fsAppPriXAppEntry entry .1.3.6.1.4.1.29601.2.22.3.4.3.1
This table contains management information applicable to
an application entry.
Indexes
No indexes recorded
Column Syntax OID
fsAppPriXAppRowStatus
The row status of Application Priority Mapping Entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.22.3.4.3.1.1

fslldpXdot1dcbxLocApplicationPriorityBasicTable

table
.1.3.6.1.4.1.29601.2.22.3.4.4 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for the IEEE 802.1
organizationally defined LLDP Application PrioriyTLV on
the local system known to this agent
fslldpXdot1dcbxLocApplicationPriorityBasicEntry entry .1.3.6.1.4.1.29601.2.22.3.4.4.1
Information about the IEEE 802.1 organizational defined
Application PriorityTLV LLDP extension.
Indexes
LLDP-V2-MIBlldpV2LocPortIfIndex
Column Syntax OID
fslldpXdot1dcbxLocApplicationPriorityWilling
Indicates if the local system is willing to accept
the Application Priority configuration of the remote system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.4.4.1.1

fslldpXdot1dcbxAdminApplicationPriorityBasicTable

table
.1.3.6.1.4.1.29601.2.22.3.4.5 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for the IEEE 802.1
organizationally defined LLDP Application PrioriyTLV on
the local system known to this agent
fslldpXdot1dcbxAdminApplicationPriorityBasicEntry entry .1.3.6.1.4.1.29601.2.22.3.4.5.1
Information about the IEEE 802.1 organizational defined
Application PriorityTLV LLDP extension.
Indexes
LLDP-V2-MIBlldpV2LocPortIfIndex
Column Syntax OID
fslldpXdot1dcbxAdminApplicationPriorityWilling
Indicates if the local system is willing to accept the
Application Priority configuration of the remote system.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.4.5.1.1

fslldpXdot1dcbxRemApplicationPriorityBasicTable

table
.1.3.6.1.4.1.29601.2.22.3.4.6 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for the IEEE 802.1
organizationally defined LLDP Application Prioriy TLV
on the local system known to this agent
fslldpXdot1dcbxRemApplicationPriorityBasicEntry entry .1.3.6.1.4.1.29601.2.22.3.4.6.1
Information about the IEEE 802.1 organizational defined
Application Priority TLV LLDP extension.
Indexes
LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex
Column Syntax OID
fslldpXdot1dcbxRemApplicationPriorityWilling
Indicates if the local system is willing to accept the
Application Priority configuration of the remote system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.4.6.1.1

fslldpXdot1dcbxConfigTCSupportedTable

table
.1.3.6.1.4.1.29601.2.22.3.5.1 · 1 row entry · 1 columns
Open in standard view 
A table that controls selection of Traffic Classes Supported
TLVs to be transmitted on individual ports.
fslldpXdot1dcbxConfigTCSupportedEntry entry .1.3.6.1.4.1.29601.2.22.3.5.1.1
LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Traffic
Classes Supported TLV on LLDP transmission capable ports.

This configuration object augments the …
Indexes
No indexes recorded
Column Syntax OID
fslldpXdot1dcbxConfigTCSupportedTxEnable
The fslldpXdot1dcbxConfigTCSupportedTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.22.3.5.1.1.1

fslldpXdot1dcbxLocTCSupportedTable

table
.1.3.6.1.4.1.29601.2.22.3.5.2 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for the IEEE 802.1
organizationally defined LLDP TCSupported TLV on the local
system known to this agent
fslldpXdot1dcbxLocTCSupportedEntry entry .1.3.6.1.4.1.29601.2.22.3.5.2.1
Information about the IEEE 802.1 organizational defined
Traffic Classes Supported TLV LLDP extension.
Indexes
LLDP-V2-MIBlldpV2LocPortIfIndex
Column Syntax OID
fslldpXdot1dcbxLocTCSupported
Indicates the number of traffic classes supported on the
local system. A value of 0 indicates that 8 traffic classes
are supported.
FsLldpXdot1dcbxTCSupportedCapacity
Textual Convention: FsLldpXdot1dcbxTCSupportedCapacity Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.29601.2.22.3.5.2.1.1

fslldpXdot1dcbxRemTCSupportedTable

table
.1.3.6.1.4.1.29601.2.22.3.5.3 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for the IEEE 802.1
organizationally defined LLDP TCSupported TLV on the local
system known to this agent
fslldpXdot1dcbxRemTCSupportedEntry entry .1.3.6.1.4.1.29601.2.22.3.5.3.1
Information about the IEEE 802.1 organizational defined
Traffic Classes Supported TLV LLDP extension.
Indexes
LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex
Column Syntax OID
fslldpXdot1dcbxRemTCSupported
Indicates the number of traffic classes supported on the
local system. A value of 0 indicates that 8 traffic classes
are supported.
FsLldpXdot1dcbxTCSupportedCapacity
Textual Convention: FsLldpXdot1dcbxTCSupportedCapacity Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.29601.2.22.3.5.3.1.1

fslldpXdot1dcbxAdminTCSupportedTable

table
.1.3.6.1.4.1.29601.2.22.3.5.4 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for the IEEE 802.1
organizationally defined LLDP TCSupported TLV on the local
system known to this agent
fslldpXdot1dcbxAdminTCSupportedEntry entry .1.3.6.1.4.1.29601.2.22.3.5.4.1
Information about the IEEE 802.1 organizational defined
Traffic Classes Supported TLV LLDP extension.
Indexes
LLDP-V2-MIBlldpV2LocPortIfIndex
Column Syntax OID
fslldpXdot1dcbxAdminTCSupported
Indicates the number of traffic classes supported on the
local system. A value of 0 indicates that 8 traffic classes
are supported.

Note that generaly this represents a physical characteristic
of the devi…
FsLldpXdot1dcbxTCSupportedCapacity
Textual Convention: FsLldpXdot1dcbxTCSupportedCapacity Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.29601.2.22.3.5.4.1.1

fsDcbxCEECtrlTable

table
.1.3.6.1.4.1.29601.2.22.3.6.2 · 1 row entry · 7 columns
Open in standard view 
This table contains the state variables of control state machine
for each port operating in CEE version.
fsDcbxCEECtrlEntry entry .1.3.6.1.4.1.29601.2.22.3.6.2.1
This object specified the information about Control state variables and
control TLV counters as defined in DCBX base specification Rev 1.01.
Indexes
fsDcbxCEECtrlPortNumber
Column Syntax OID
fsDcbxCEECtrlPortNumber
This object indicates the interface identifier for which the
control state variables are maintained.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.1
fsDcbxCEECtrlSeqNo
This object specifies the current sequence number that is sent
in DCBX control TLVs in CEE mode.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.2
fsDcbxCEECtrlAckNo
This object specifies the current ACK number that is to be sent
to peer in DCBX control TLVs in CEE mode.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.3
fsDcbxCEECtrlRcvdAckNo
This object specifies the current ACK number that is sent by peer
in DCBX control TLV in CEE mode.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.4
fsDcbxCEECtrlTxTLVCounter
This object specifies the number of DCBX CEE frames transmitted
per interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.5
fsDcbxCEECtrlRxTLVCounter
This object specifies the number of DCBX CEE frames received
per interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.6
fsDcbxCEECtrlRxTLVErrorCounter
This object specifies the number of DCBX CEE frames discarded
due to errors in the frame.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.22.3.6.2.1.7