fsAppPriDcbxOperState
ARICENT-DCB-MIB ·
.1.3.6.1.4.1.29601.2.22.3.4.2.1.3
Object
column
DcbState
This object is used to display the current state of the
DCBX state machine for the application priority feature on the given
port.
If state is Off '(1)', then application priority Operational(local)
parameters will be same as application priority admin Configuration
Parameters and will not have any impact in the system(hardware).
If state is init '(1)', then application priority Operational(local)
parameters will be same as application priority admin Configuration
Parameters.
If state is rxrecommended '(2)', then application priority
Operational(local) parameters will be same as application priority
remote parameters.
Context
- MIB
- ARICENT-DCB-MIB
- OID
.1.3.6.1.4.1.29601.2.22.3.4.2.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsAppPriPortEntry
- Table
- fsAppPriPortTable
- Siblings
- 12
Syntax
DcbState
- Source
- DcbState
- Base type
Enumeration
Values & Constraints
Type Values
0 | off |
1 | init |
2 | rxrecommended |
3 | ceedisabled |
4 | uselocalcfg |
5 | usepeercfg |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsAppPriPortNumber This indicates the interface identifier for which the application priority
configuration is applied. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.29601.2.22.3.4.2.1.1 |
| fsAppPriRowStatus This object is used to create and delete a row in this table.
Only 'createAndGo', and 'destroy' values are allowed for this
object. 'createAndWait' and 'notInServic… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.22.3.4.2.1.10 |
| fsAppPriSyncd This object indicates whether the current DesiredConfig has been
received by the peer. This object is applicable only when the DCBX
operating version is CEE | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.22.3.4.2.1.11 |
| fsAppPriError This object indicates that an error has occurred during the
configuration exchange with the peer. Error is also set to TRUE when the
Compatible method for the feature fails.This… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.22.3.4.2.1.12 |
| fsAppPriDcbxStatus This object indicates the current DCBx status of the Application
Priority feature. | column | DcbxStatus | .1.3.6.1.4.1.29601.2.22.3.4.2.1.13 |
| fsAppPriAdminMode This object is used to configure the admin mode for application
priority feature on the given port.
- If this object is configured as 'auto(0)' on a port then … | column | DcbAdminMode | .1.3.6.1.4.1.29601.2.22.3.4.2.1.2 |
| fsAppPriDcbxStateMachine This object is used to display the DCBX state machine type that is
used by the application priority feature on the given port. | column | DcbStateMachineType | .1.3.6.1.4.1.29601.2.22.3.4.2.1.4 |
| fsAppPriClearTLVCounters This object when set to TRUE, clears the following counters
associated with this port and resets its value to FALSE:
fsAppPriTxTLVCounter,
fsAppPriRxTLVCounter,
fsAppP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.22.3.4.2.1.5 |
| fsAppPriTxTLVCounter This object is used to keep track of the number of application
priority TLVs that are transmitted from the port. This counter will
be incremented every time an application prio… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.22.3.4.2.1.6 |
| fsAppPriRxTLVCounter This object indicates the number of application priority
TLVs that are received in this port. This counter will be incremented
every time when there is application priority TLV is… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.22.3.4.2.1.7 |
| fsAppPriRxTLVErrors This object indicates the number of malformed TLVs received by
application priority module. This counter will be incremented every
time an application priority TLV is dropped by… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.29601.2.22.3.4.2.1.8 |
| fsAppPriAppProtocols This object indicates the total number of application priority
entries present in the last TLV received from its peer | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.22.3.4.2.1.9 |