ALU-SERVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
118

aeSapIpipeInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.1 · 1 row entry · 5 columns
Open in standard view 
An extension table that contains IPIPE specific SAP 
information for 7705 series routers.
aeSapIpipeInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.1.1
IPIPE specific information about a SAP.
Indexes
No indexes recorded
Column Syntax OID
aeSapIpipeIpcpAssignCeAddress
The value of aeSapIpipeIpcpAssignCeAddress specifies whether or not
the configured CE IP address for this IPIPE will be exchanged by IPCP,
if applicable on a given interface, to configure the remote peer's IP
address.…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.1.1.1
aeSapIpipeIpcpPriDnsAddrType
The value of aeSapIpipeIpcpPriDnsAddrType specifies the type of
aeSapIpipeIpcpPriDnsAddr, the IP address of the primary DNS to be used
by the remote peer.

This object can be set to non-default o…
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.6.1.2.2.6.1.1.2
aeSapIpipeIpcpPriDnsAddr
The value of aeSapIpipeIpcpPriDnsAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure
the primary DNS's IP address on the remote peer. The type of this
address …
OctetStringr/w
Constraints:
range: 0-0
range: 16-16
range: 4-4
 .1.3.6.1.4.1.6527.6.1.2.2.6.1.1.3
aeSapIpipeIpcpSecDnsAddrType
The value of aeSapIpipeIpcpSecDnsAddrType specifies the type of
aeSapIpipeIpcpSecDnsAddr, the IP address of the secondary DNS to be
used by the remote peer.

This object can be set to non-default …
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.6.1.2.2.6.1.1.4
aeSapIpipeIpcpSecDnsAddr
The value of aeSapIpipeIpcpSecDnsAddr specifies the IP address that will
be exchanged by IPCP, if applicable on a given interface, to configure
the secondary DNS's IP address on the remote peer. The type of this
addres…
OctetStringr/w
Constraints:
range: 16-16
range: 4-4
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.6.1.1.5

aeSapTlsInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.2 · 1 row entry · 3 columns
Open in standard view 
An extension table that contains TLS specific SAP 
information for 7705 series routers.
aeSapTlsInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.2.1
TLS specific information about a SAP.
Indexes
No indexes recorded
Column Syntax OID
aeSapTlsPPPoEIncludeCircuitId
The value of aeSapTlsPPPoEIncludeCircuitId specifies whether or not
the agent-circuit-id as per RFC 4679 will be inserted into PPPoE PADI
and PADR messages.

This value may only be set when the sap encapsu…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.2.1.1
aeSapTlsPPPoECircuitId
The value of aeSapTlsPPPoECircuitId indicates the the agent-circuit-id
as per RFC 4679 to be inserted into PPPoE PADI and PADR messages.

This value is only valid when aeSapTlsPPPoEIncludeCircuitId is 't…
OctetString
Constraints:
range: 1-65
 .1.3.6.1.4.1.6527.6.1.2.2.6.2.1.2
aeSapTlsForceCVlanForwarding
The value of aeSapTlsForceCVlanForwarding specifies whether or not
the c-tag will be perserve when forwarding to uplink dot1q sap or vlan
spoke sdp.

This value may only be set when the sap encapsulation …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.2.1.3

aeSapTlsAtmInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.3 · 1 row entry · 1 columns
Open in standard view 
An extension table that contains TLS specific SAP 
information for 7705 series routers.
aeSapTlsAtmInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.3.1
TLS specific information about a SAP.
Indexes
No indexes recorded
Column Syntax OID
aeSapTlsAtmSubscriberVlanTag
This object specifies the subscriber vlan tag value on a ATM sap
for this TLS service. The default value (0xfff) means invalid vlan
tag.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6527.6.1.2.2.6.3.1.1

aeSvcTlsInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.4 · 1 row entry · 2 columns
Open in standard view 
An extension table that contains TLS specific SVC 
information for 7705 series routers.
aeSvcTlsInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.4.1
TLS specific information about a Service.
Indexes
No indexes recorded
Column Syntax OID
aeSvcTlsPPPoEIncludeCircuitId
The value of aeSvcTlsPPPoEIncludeCircuitId specifies whether or not
the agent-circuit-id as per RFC 4679 will be inserted by default
into PPPoE PADI and PADR messages of SAPs with an encapsulation of
'atmEncap'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.4.1.1
aeSvcTlsL4Hashing
The value of aeSvcTlsL4Hashing specifies whether or not
L4 hashing for TLS Ethernet services
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.4.1.2

aeSapApipeAtmInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.6 · 1 row entry · 2 columns
Open in standard view 
An extension table that contains Apipe Atm specific SAP  
information for 7705 series routers.
aeSapApipeAtmInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.6.1
Atm specific information about a SAP.
Indexes
No indexes recorded
Column Syntax OID
aeSapApipeAtmVcidTranslatedVpi
Unique translated Vpi value in NGT1 PW service
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6527.6.1.2.2.6.6.1.1
aeSapApipeAtmVcidTranslatedVci
Unique translated Vci value in NGT1 PW service
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.6.1.2.2.6.6.1.2

aeSvcSapAGInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.7 · 1 row entry · 7 columns
Open in standard view 
A table that contains SAP aggregation group 
information. Only one group can be created per service. 
This group is used to associate all N>1's SAP's group.
aeSvcSapAGInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.7.1
SAP aggregation group information about a N>1 service.
Indexes
TIMETRA-SERV-MIBsvcId aeSvcSapAGName
Column Syntax OID
aeSvcSapAGName
The value of the object aeSvcSapAGName specifies the name of
the SAP aggregation group. The name must be unique within
a Apipe service, however the same name can appear in different
Apipe services, in which case they…
TIMETRA-TC-MIBTNamedItem
Textual Convention: TIMETRA-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.1
aeSvcSapAGRowStatus
The value of the object aeSvcSapAGRowStatus specifies the
status of this row.
The only values supported during a set operation are
'createAndGo' and 'destroy'. To delete an entry
from this table, there should be no…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.2
aeSvcSapAGDescription
Generic information about this SAP aggregation group.
TIMETRA-SERV-MIBServObjDescr/w
Textual Convention: TIMETRA-SERV-MIBServObjDesc OctetString
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.3
aeSvcSapAGIngressQosPolicyId
The value of the object aeSvcSapAGIngressQosPolicyId specifies
the row index in the aeSvcSapAGInfoTable corresponding to this
ingress QoS policy, or one if no policy is specified.
The value 0 is needed for mirror SAP…
TIMETRA-TC-MIBTSapIngressPolicyIDr/w
Textual Convention: TIMETRA-TC-MIBTSapIngressPolicyID Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.4
aeSvcSapAGEgressQosPolicyId
The value of the object aeSvcSapAGEgressQosPolicyId specifies
the row index in the aeSvcSapAGInfoTable corresponding to this
ingress QoS policy, or one if no policy is specified.
TIMETRA-TC-MIBTSapEgressPolicyIDr/w
Textual Convention: TIMETRA-TC-MIBTSapEgressPolicyID Unsigned32
Type Constraints:
range: 1..65539
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.5
aeSvcSapAGCollectAcctStats
When the value of this object is 'true' the agent
collects accounting statistics on this N>1 SAP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.6
aeSvcSapAGAccountingPolicyId
This object specifies the policy to use to collect
accounting statistics on this N>1 SAP. The value zero
indicates that the agent should use the default
accounting policy, if one exists.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.7.1.7

aluSapAGBaseStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.8 · 1 row entry · 29 columns
Open in standard view 
A table that contains basic statistics 
of a SAP Aggregation Group.
aluSapAGBaseStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.8.1
Basic statistics about a specific
SAP Aggregation Group.
Indexes
TIMETRA-SERV-MIBsvcId aeSvcSapAGName
Column Syntax OID
aluSapAGBaseStatsIngressDroppedPackets
The number of packets dropped in ingress due to:
SAP state, bad checksum, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.1
aluSapAGBaseStatsIngressDroppedOctets
The number of octets dropped in ingress due to:
SAP state, bad checksum, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.2
aluSapAGBaseStatsIngressOfferedHiPrioPackets
The number of high priority packets
offered, as determined by the SAP
Aggregation Group's ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.3
aluSapAGBaseStatsIngressOfferedHiPrioOctets
The number of high priority octets
offered, as determined by the SAP
Aggregation Group's ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.4
aluSapAGBaseStatsIngressOfferedLoPrioPackets
The number of low priority packets
offered, as determined by the SAP
Aggregation Group's ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.5
aluSapAGBaseStatsIngressOfferedLoPrioOctets
The number of low priority octets
offered, as determined by the SAP
Aggregation Group's ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.6
aluSapAGBaseStatsIngressDroppedHiPrioPackets
The number of high priority packets,
as determined by the SAP Aggregation
Group's ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.7
aluSapAGBaseStatsIngressDroppedHiPrioOctets
The number of high priority octets,
as determined by the SAP Aggregation
Group's ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.8
aluSapAGBaseStatsIngressDroppedLoPrioPackets
The number of low priority packets,
as determined by the SAP Aggregation
Group's ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.9
aluSapAGBaseStatsIngressDroppedLoPrioOctets
The number of low priority octets,
as determined by the SAP Aggregation
Group's ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.10
aluSapAGBaseStatsIngressForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.11
aluSapAGBaseStatsIngressForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.12
aluSapAGBaseStatsIngressForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.13
aluSapAGBaseStatsIngressForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.14
aluSapAGBaseStatsEgressDroppedInProfPackets
The number of in-profile packets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.15
aluSapAGBaseStatsEgressDroppedInProfOctets
The number of in-profile octets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.16
aluSapAGBaseStatsEgressDroppedOutProfPackets
The number of out-of-profile packets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.17
aluSapAGBaseStatsEgressDroppedOutProfOctets
The number of out-of-profile octets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.18
aluSapAGBaseStatsEgressForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.19
aluSapAGBaseStatsEgressForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.20
aluSapAGBaseStatsEgressForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.21
aluSapAGBaseStatsEgressForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.22
aluSapAGBaseStatsUnknownVpiVciCellsDropped
The number of cells received with vpi/vci
that is not defined under vcid-translation.
The cells with unknown vpi/vci are dropped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.23
aluSapAGBaseStatsCustId
The Customer ID for the associated service.
TIMETRA-TC-MIBTmnxCustId
Textual Convention: TIMETRA-TC-MIBTmnxCustId Unsigned32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.24
aluSapAGBaseStatsIngressOfferedUncoloredPackets
The number of uncolored packets offered,
as determined by the SAP ingress QoS
policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.25
aluSapAGBaseStatsIngressOfferedUncoloredOctets
The number of uncolored octets offered,
as determined by the SAP ingress QoS
policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.26
aluSapAGBaseStatsAuthenticationPktsDiscarded
The number of DHCP packets discarded
as result of authentication.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.27
aluSapAGBaseStatsAuthenticationPktsSuccess
The number of DHCP packets successfully authenticated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.28
aluSapAGBaseStatsLastClearedTime
The value of aluSapAGBaseStatsLastClearedTime
Indicates the sysUpTime when the counters in this
table were last cleared.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.6.8.1.29

aluSapAGIngQosQStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.9 · 1 row entry · 16 columns
Open in standard view 
A table that contains ingress QoS queue SAP 
Aggregation Group statistics.
aluSapAGIngQosQStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.9.1
Ingress statistics about a specific SAP
Aggregation Group?s QoS queue.
Indexes
TIMETRA-SERV-MIBsvcId aeSvcSapAGName aluSapAGIngQosQueueId
Column Syntax OID
aluSapAGIngQosQueueId
The index of the ingress QoS queue of
this SAP Aggregation Group.
TIMETRA-SERV-MIBTSapIngQueueId
Textual Convention: TIMETRA-SERV-MIBTSapIngQueueId Unsigned32
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.1
aluSapAGIngQosQStatsOfferedHiPrioPackets
The number of high priority packets,
offered as determined by the SAP
Aggregation Group ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.2
aluSapAGIngQosQStatsDroppedHiPrioPackets
The number of high priority packets,
as determined by the SAP Aggregation Group
ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.3
aluSapAGIngQosQStatsOfferedLoPrioPackets
The number of low priority packets,
offered as determined by the SAP
Aggregation Group ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.4
aluSapAGIngQosQStatsDroppedLoPrioPackets
The number of low priority packets,
as determined by the SAP Aggregation Group
ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.5
aluSapAGIngQosQStatsOfferedHiPrioOctets
The number of high priority octets,
offered as determined by the SAP
Aggregation Group ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.6
aluSapAGIngQosQStatsDroppedHiPrioOctets
The number of low priority octets,
as determined by the SAP Aggregation Group
ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.7
aluSapAGIngQosQStatsOfferedLoPrioOctets
The number of low priority octets,
offered as determined by the SAP
Aggregation Group ingress QoS policy.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.8
aluSapAGIngQosQStatsDroppedLoPrioOctets
The number of low priority octets,
as determined by the SAP Aggregation Group
ingress QoS policy, dropped due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.9
aluSapAGIngQosQStatsForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.10
aluSapAGIngQosQStatsForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.11
aluSapAGIngQosQStatsForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.12
aluSapAGIngQosQStatsForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.13
aluSapAGIngQosCustId
The Customer ID for the associated service.
TIMETRA-TC-MIBTmnxCustId
Textual Convention: TIMETRA-TC-MIBTmnxCustId Unsigned32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.14
aluSapAGIngQosQStatsUncoloredPacketsOffered
The number of uncolored packets offered to the ingress.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.15
aluSapAGIngQosQStatsUncoloredOctetsOffered
The number of uncolored octets offered to
the ingress.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.9.1.16

aluSapAGEgrQosQStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.10 · 1 row entry · 10 columns
Open in standard view 
A table that contains egress QoS queue SAP 
Aggregation Group statistics.
aluSapAGEgrQosQStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.10.1
Egress statistics about a specific SAP
Aggregation Group's QoS queue.
Indexes
TIMETRA-SERV-MIBsvcId aeSvcSapAGName aluSapAGEgrQosQueueId
Column Syntax OID
aluSapAGEgrQosQueueId
The index of the egress QoS queue of
this SAP Aggregation Group.
TIMETRA-SERV-MIBTSapEgrQueueId
Textual Convention: TIMETRA-SERV-MIBTSapEgrQueueId Unsigned32
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.1
aluSapAGEgrQosQStatsForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.2
aluSapAGEgrQosQStatsDroppedInProfPackets
The number of in-profile packets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.3
aluSapAGEgrQosQStatsForwardedOutProfPackets
The number of in-profile packets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.4
aluSapAGEgrQosQStatsDroppedOutProfPackets
The number of in-profile packets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.5
aluSapAGEgrQosQStatsForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.6
aluSapAGEgrQosQStatsDroppedInProfOctets
The number of in-profile octets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.7
aluSapAGEgrQosQStatsForwardedOutProfOctets
The number of out-of-profile octets
(rate below CIR) forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.8
aluSapAGEgrQosQStatsDroppedOutProfOctets
The number of out-of-profile octets
discarded due to: MBS exceeded,
buffer pool limit exceeded, etc.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.9
aluSapAGEgrQosCustId
The Customer ID for the associated service.
TIMETRA-TC-MIBTmnxCustId
Textual Convention: TIMETRA-TC-MIBTmnxCustId Unsigned32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.6.10.1.10

aluSapEthCfmTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.11 · 1 row entry · 1 columns
Open in standard view 
A table that contains SAP Ethernet CFM Group.
aluSapEthCfmEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.11.1
Ethernet DFM Information specific to a SSAP
Indexes
No indexes recorded
Column Syntax OID
aluSapEthCfmHoldMepUp
Enable/Disable MEPs on this SAP on failure of port link.
aluSapEthCfmHoldMepUp can only be enabled on one SAP per EPIPE service.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.11.1.1

aluSapEpipeInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.12 · 1 row entry · 4 columns
Open in standard view 
An extension table that contains EPIPE specific SAP 
information for 7705 series routers.
aluSapEpipeInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.12.1
EPIPE specific information about a SAP.
Indexes
Column Syntax OID
aluSapEpipeMwCompression
The value of aluSapEpipeMwCompression specifies whether or not
a SAP on a Microwave Link has radio compression enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.12.1.1
aluSapEpipeMwDestMacAddress
The value of aluSapEpipeMwDestMacAddress specifies the destination
MAC address to be used during compression on a microwave link.

This object can only be set when compression is enabled.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6527.6.1.2.2.6.12.1.2
aluSapEpipeMwSrcMacAddress
The value of aluSapEpipeMwSrcMacAddress specifies the source
MAC address to be used during compression on a microwave link.

This object can only be set when compression is enabled.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6527.6.1.2.2.6.12.1.3
aluSapEpipeMwCompressRTP
The value of aluSapEpipeMwCompression specifies whether or not
RTP is enabled on a Microwave Link SAP when radio compression
is enabled enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.12.1.4

aluSapBaseInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.13 · 1 row entry · 14 columns
Open in standard view 
An extension table that contains SAP Base Information for 7705 series routers.
aluSapBaseInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.13.1
Information about a SAP.
Indexes
No indexes recorded
Column Syntax OID
aluSapIngressSchedulerMode
The value of aluSapIngressSchedulerMode indicates the mode that the
ingress scheduler is provisioned for this SAP to operate in.

All MDAs are initialized with a valid aluSapIngressSchedulerMode, however i…
AluSapSchedulerModer/w
Textual Convention: AluSapSchedulerMode Enumeration
Type Values:
1four-priority
2sixteen-priority
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.1
aluSapEgressSchedulerMode
The value of aluSapEgressSchedulerMode indicates the mode that the
egress scheduler is provisioned for this SAP to operate in.

All MDAs are initialized with a valid aluSapEgressSchedulerMode, however it
…
AluSapSchedulerModer/w
Textual Convention: AluSapSchedulerMode Enumeration
Type Values:
1four-priority
2sixteen-priority
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.2
aluSapIngressAggCir
The value of the object aluSapIngressAggCir specifies the CIR of all
ingress queues for this SAP.

aluSapIngressAggCir cannot be modified from its default value on a SAP with
aluSapIngressSchedulerMode be…
kbpsALU-QOS-MIBAluSapSchedulerCirr/w
Textual Convention: ALU-QOS-MIBAluSapSchedulerCir Integer32
Type Constraints:
range: -1..10000000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.3
aluSapEgressAggCir
The value of the object aluSapEgressAggCir specifies the CIR of all
egress queues for this SAP.

aluSapEgressAggCir cannot be modified from its default value on a SAP with
aluSapEgressSchedulerMode bei…
kbpsALU-QOS-MIBAluSapSchedulerCirr/w
Textual Convention: ALU-QOS-MIBAluSapSchedulerCir Integer32
Type Constraints:
range: -1..10000000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.4
aluSapIngressAggRateLimit
The value of the object aluSapIngressAggRateLimit
specifies the maximum total rate of all ingress queues for
this SAP. The value '-1' means that there is no limit.

aluSapIngressAggRateLimit cannot be modi…
kbpsInteger32r/w
Constraints:
range: 1-10000000
range: -1--1
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.5
aluSapEgressAggRateLimit
The value of the object aluSapEgressAggRateLimit
specifies the maximum total rate of all egress queues for
this SAP. The value '-1' means that there
is no limit.

aluSapEgressAggRateLimit cannot be…
kbpsInteger32r/w
Constraints:
range: -1--1
range: 1-10000000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.6
aluSapIngressShaperGroup
aluSapIngressShaperGroup is one of the shaper groups defined within the
shaper policy associated with the access ingress MDA object
aluExtTmnxMDAAccessIngShaperPolicy.

If aluExtTmnxMDAAccessIngShaperPolic…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.7
aluSapEgressShaperGroup
aluSapEgressShaperGroup is one of the shaper groups defined within the
shaper policy associated with the access egress port object
aluExtPortEtherAccEgrShaper.

If aluExtPortEtherAccEgrShaper is a an empt…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.8
aluSapIngressAggCirPercent
The CIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapIngressAggCirPercent is set
to non-default value when the object aluSapIngressAggRateType is set to 'kbps'.
hundredths of a percentUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.9
aluSapEgressAggCirPercent
The CIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapEgressAggCirPercent is set
to non-default value when the object aluSapEgressAggRateType is set to 'kbps'.
hundredths of a percentUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.10
aluSapIngressAggRatePercent
The PIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapIngressAggRatePercent is set
to non-default value when the object aluSapIngressAggRateType is set to 'kbps'.
hundredths of a percentUnsigned32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.11
aluSapEgressAggRatePercent
The PIR percentage, in hundredths of a percent.
An 'inconsistentValue' error is returned if aluSapEgressAggRatePercent is set
to non-default value when the object aluSapEgressAggRateType is set to 'kbps'.
hundredths of a percentUnsigned32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.12
aluSapIngressAggRateType
The value of aluSapIngressAggRateType specifies the type of sap ingress
aggregate-rate.

When the value of aluSapIngressAggRateType is set to 'kbps', the ingress aggregate rates
are specified in kbps usin…
TIMETRA-TC-MIBTBWRateTyper/w
Textual Convention: TIMETRA-TC-MIBTBWRateType Enumeration
Type Values:
1kbps
2percentPortLimit
3percentLocalLimit
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.13
aluSapEgressAggRateType
The value of aluSapEgressAggRateType specifies the type of sap egress
aggregate-rate.

When the value of aluSapEgressAggRateType is set to 'kbps', the egress aggregate rates
are specified in kbps, using v…
TIMETRA-TC-MIBTBWRateTyper/w
Textual Convention: TIMETRA-TC-MIBTBWRateType Enumeration
Type Values:
1kbps
2percentPortLimit
3percentLocalLimit
 .1.3.6.1.4.1.6527.6.1.2.2.6.13.1.14

aluSapEthLoopbackTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.14 · 1 row entry · 6 columns
Open in standard view 
An extension table that contains testhead SAP Loopback Information for 7705 series routers.
aluSapEthLoopbackEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.14.1
Information about a testhead Loopback SAP.
Indexes
No indexes recorded
Column Syntax OID
aluSapEthLoopback
aluSapEthLoopback is used to specify if the sap is set into a loopback mode for testhead
purpose. if true, either aluSapEthLoopbackDuration or aluSapEthLoopbackPersistent has to be set at the same time.
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.6527.6.1.2.2.6.14.1.1
aluSapEthLoopbackDuration
aluSapEthLoopbackDuration is used to specify the time duration, in seconds, to set the sap
into a testhead loopback mode. Setting aluSapEthLoopbackDuration to a non-zero value must be accompanied by
setting aluSapEthL…
Unsigned32r/w
Constraints:
range: 30-86400
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.6.14.1.2
aluSapEthLoopbackPersistent
aluSapEthLoopbackPersistent is used to specify if the sap loopback configuration should be saved.
if true, save the config.
When aluSapEthLoopbackPersistent is set to 'true', aluSapEthLoopbackDuration CAN NOT be set to …
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.6527.6.1.2.2.6.14.1.3
aluSapEthLoopbackTimeLeft
aluSapEthLoopbackTimeLeft is used to specify the number of seconds left since the loopback has started.
0 if aluSapEthLoopbackTimeLeft as assigned 0, or when aluSapEthLoopback is 'false'.
Unsigned32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.6527.6.1.2.2.6.14.1.4
aluSapEthLoopbackMode
The value of the object aluSapEthLoopbackMode specifies how
traffic will be reflected.

If the value is set to 'line(1)', traffic arriving at the
SAP ingress will be reflected back out the same SAP. If the…
Enumerationr/w
Enumerated Values:
1line
2internal
 .1.3.6.1.4.1.6527.6.1.2.2.6.14.1.5
aluSapEthLoopbackMacSwap
The value of the object aluSapEthLoopbackMacSwap specifies the
enabling or disabling of source address and destination
address swapping for the reflected packets when the arriving
packet is unicast. With aluSapEthLoopba…
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.14.1.6

aluSapCemInfoTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.15 · 1 row entry · 5 columns
Open in standard view 
An extend table that contains sar7705 specific CEM SAP information.
aluSapCemInfoEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.15.1
Additional SAR Information about a specific CEM SAP.
Indexes
No indexes recorded
Column Syntax OID
aluSapCemAsymDelayEnable
The value of the object aluSapCemAsymDelayEnable specifies the
enabling or disabling of the asymetric delay control.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.15.1.1
aluSapCemAsymDelaySamples
The value of the object aluSapCemAsymDelaySamples specifies the
number of packets being sampled during the sampling period when asymetric delay
control is enabled. one, two, four or eight
corresponds to 1024, 2048, 20…
Enumerationr/w
Enumerated Values:
1one
2two
4four
8eight
16sixteen
32thirtytwo
 .1.3.6.1.4.1.6527.6.1.2.2.6.15.1.2
aluSapCemAsymDelayRepeatPeriod
The value of the object aluSapCemAsymDelayRepeatPeriod specifies the
sampling/adjusting period in minutes when the asymetric delay control is enabled.
value zero disables the periodic sampling
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6527.6.1.2.2.6.15.1.3
aluSapCemSerialRate
The value of the object aluSapCemSerialRate indicates the
bit-rate of the 'unstructuredSerial' CEM SAP.
bits/sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.15.1.4
aluSapCemOnDemandADC
The value of aluSapCemOnDemandADC, when set to 'doAction(1)', triggers
on demand ADC.
TIMETRA-TC-MIBTmnxActionTyper/w
Textual Convention: TIMETRA-TC-MIBTmnxActionType Enumeration
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.6527.6.1.2.2.6.15.1.5

aluSapCemStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.16 · 1 row entry · 2 columns
Open in standard view 
An extend table that contains sar7705 specific CEM SAP stats.
aluSapCemStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.16.1
Additional SAR Stats for a specific CEM SAP.
Indexes
No indexes recorded
Column Syntax OID
aluSapCemStatsEgressSamplingDoneCnt
The value of aluSapCemStatsEgressSamplingDoneCnt indicates
the number of times sampling is done for asym delay control.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.16.1.1
aluSapCemStatsEgressAdjustDoneCnt
The value of aluSapCemStatsEgressAdjustDoneCnt indicates
the number of times adjustment is done for asym delay control.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.16.1.2

aluSdpBindStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.17 · 1 row entry · 1 columns
Open in standard view 
An extended table that contains 7705 SAR specific SDP Binding stats.
aluSdpBindStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.17.1
Additional 7705 SAR stats for a specific SDP Binding.
Indexes
No indexes recorded
Column Syntax OID
aluSdpBindBaseStatsEgressDroppedPackets
The value of aluSdpBindBaseStatsEgressDroppedPackets indicates
the number of packets dropped egressing the sdp binding.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.17.1.1

aluSvcEpipeTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.18 · 1 row entry · 2 columns
Open in standard view 
The extended svcEpipeTable contains objects related to 'epipe'
services.
          
Entries are created and destroyed when 'epipe' services
are created and destroyed by the system.
aluSvcEpipeEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.18.1
Extension of svcEpipeEntry, each row entry contains objects that
allows the modification of the 'epipe' specific objects.
Indexes
No indexes recorded
Column Syntax OID
aluSvcEpipeTeidHashing
The value of aluSvcEpipeTeidHashing specifies service-level teid
hashing for Ethernet services.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.18.1.1
aluSvcEpipeL4Hashing
The value of aluSvcEpipeL4Hashing specifies service-level L4
hashing for Ethernet services.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.18.1.2

aeSdpBindCpipeTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.19 · 1 row entry · 6 columns
Open in standard view 
The extended table sdpBindCpipeTable contains 7705 SAR
specific objects related to a cpipe SDP Bind.
          
A row will exist in this table for each cpipe sdpBind
configured on this system. Rows are created and deleted
automatically by the system.
aeSdpBindCpipeEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.19.1
Additional 7705 SAR objects related to a cpipe SDP Bind.
Indexes
No indexes recorded
Column Syntax OID
aeSdpBindCpipeLocalAsymDelay
The value of the object aeSdpBindCpipeLocalAsymDelay indicates
whether Asymmetic Delay Control (ADC) is enabled locally. This value
is transmitted to the remote peer.
TIMETRA-TC-MIBTmnxEnabledDisabled
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.19.1.1
aeSdpBindCpipePeerAsymDelay
The value of the object aeSdpBindCpipePeerAsymDelay indicates
whether Asymmetic Delay Control (ADC) is enabled remotely. This value
is received from the remote peer.

If there is no remote peer, or if the …
TIMETRA-TC-MIBTmnxEnabledDisabled
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.6.19.1.2
aeSdpBindCpipeLocalJitterBuffer
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
local jitter buffer size in milliseconds (ms).
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.19.1.3
aeSdpBindCpipePeerJitterBuffer
The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the
remote jitter buffer size in milliseconds (ms).

If there is no remote peer, or if the label mapping has not been
received, or if this …
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.19.1.4
aeSdpBindCpipeLocalSerialRate
The value of the object aeSdpBindCpipeLocalSerialRate indicates the
local Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s.
bits/sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.19.1.5
aeSdpBindCpipePeerSerialRate
The value of the object aeSdpBindCpipePeerSerialRate indicates the
remote Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s.

If there is no remote peer, or if the label mapping has not been
re…
bits/sSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.6.19.1.6

aluExtSapBaseStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.20 · 1 row entry · 1 columns
Open in standard view 
An extension table that contains 7705 SAR specific SAP stats.
aluExtSapBaseStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.20.1
Additinal 7705 SAR stats for a specific SAP.
Indexes
No indexes recorded
Column Syntax OID
aluExtSapBaseStatsEgressDroppedPackets
The value of aluExtSapBaseStatsEgressDroppedPackets indicates
the number of packets dropped egressing the SAP.
When sapType is ies or vprn, aluExtSapBaseStatsEgressDroppedPackets
is always 0 as this stat count is not av…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.6.20.1.1

aluExtSapEthCfmTable

table
.1.3.6.1.4.1.6527.6.1.2.2.6.21 · 1 row entry · 1 columns
Open in standard view 
An extension table that contains 7705 SAR informationn
pertaining to Ethernet Connectivity Fault Management (CFM)
for Service Access Points (SAPs).
aluExtSapEthCfmEntry entry .1.3.6.1.4.1.6527.6.1.2.2.6.21.1
Additional 7705 SAR objects related to the Ethernet CFM information
for a given Ethernet encapsulated SAP.
Indexes
No indexes recorded
Column Syntax OID
aluExtSapEthCfmHoldMepUp
Enable/Disable MEPs on this SAP on failure of port link.
aluExtSapEthCfmHoldMepUp can only be enabled on one SAP per service.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.6.21.1.1