ALCATEL-ENT1-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
221

esmConfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1 · 1 row entry · 40 columns
Open in standard view 
A list of ESM Physical Port instances.
esmConfEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1
A ESM Physical Port entry.
Indexes
IF-MIBifIndex
Column Syntax OID
esmPortSlot
The physical Slot number for this Ethernet Port.
Slot number has been added to be used by the private Trap.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.1
esmPortIF
The on-board interface number for this Ethernet Port.
Port Number has been added to be used by the private Trap.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.2
esmPortAutoSpeed
The automatically detected port line speed
of this ESM port.
Enumeration
Enumerated Values:
1speed100
2speed10
3speedAuto
4unknown
5speed1000
6speed10000
7speed40000
11speed20000
12speed21000
13speed2000
14speed4000
15speed8000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.3
esmPortAutoDuplexMode
The automatically detected port duplex mode
of this ESM port.

Note: GigaEthernet supports only Full duplex mode.
Default value for 10/100 = Half duplex mode.
Enumeration
Enumerated Values:
1fullDuplex
2halfDuplex
3autoDuplex
4unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.4
esmPortCfgSpeed
The configured port line speed of this ESM port.
Enumerationr/w
Enumerated Values:
1speed100
2speed10
3speedAuto
5speed1000
6speed10000
7speed40000
8speedMax100
9speedMax1000
13speed2000
14speed4000
15speed8000
16speedMax4000
17speedMax8000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.5
esmPortCfgDuplexMode
The configured port duplex mode of this ESM port.
Note: GigaEthernet support only full-duplex.
Enumerationr/w
Enumerated Values:
1fullDuplex
2halfDuplex
3autoDuplex
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.6
esmPortAdminStatus
The desired state of the interface. The testing(3) state
indicates that no operational packets can be passed. When a
managed system initializes, all interfaces start with
ifAdminStatus in the down(2) state. As a resu…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.7
esmPortLinkUpDownTrapEnable
Indicates whether linkUp/linkDown traps should be generated
for this interface.

By default, this object should have the value enable(1) for
interfaces which do not operate on 'top' of any …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.8
esmPortCfgMaxFrameSize
Configure the value of the maximum frame
size allow.
For 10Mbps the range is upto 1518 bytes.
For ports with speed > 10Mbps the value can extend upto 9216 bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.11
esmPortAlias
This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.

On the first instantiation of an interface, the value of
ifAlias…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.12
esmPortCfgPause
This object is used to configure the default
administrative PAUSE mode for this interface.

This object represents the
administratively-configured PAUSE mode for this
interface. If auto-negotiation is not…
Enumerationr/w
Enumerated Values:
1disabled
2enabledXmit
3enabledRcv
4enabledXmitAndRcv
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13
esmPortCfgAutoNegotiation
Allow the user to enable or disable the port auto negotiation.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.15
esmPortCfgCrossover
Allow the user to configure port crossover.
This object is applicable only to copper ports.
For fiber ports notapplicable is returned as a status.
Enumerationr/w
Enumerated Values:
1mdi
2mdix
3auto
4notapplicable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.16
esmPortCfgHybridActiveType
This object is only applicable to hybrid ports .
It indicates configured active media type.(the operational media
type may be different if esmPortCfgHybridMode is configured to be
preferredFiber or preferredCopper)
For …
Enumeration
Enumerated Values:
0notapplicable
1fiber
2copper
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.18
esmPortCfgHybridMode
This object is only applicable to hybrid ports.
This allows the user the user to configure the media type
with which the port should come up.
The user can configure the port to come as copper only
or fiber only or eithe…
Enumerationr/w
Enumerated Values:
0notapplicable
1preferredCopper
2forcedCopper
3preferredFiber
4forcedFiber
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.19
esmPortOperationalHybridType
This object is only applicable to hybrid ports .
It indicates the actual media type that has link up and is or will be
passing traffic. If link is not present the object will return none(0) value.
Enumeration
Enumerated Values:
0none
1fiber
2copper
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.20
esmPortBcastRateLimitEnable
Enable/disable per port broadcast traffic rate limit. When 'enable' value from
esmPortBcastRateLimit object will be applicable to the ingressing broadcast traffic if
the speed is greater than the limit else the default …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.21
esmPortBcastRateLimitType
The unit applicable to the value in esmPortBcastRateLimit object.
Enumerationr/w
Enumerated Values:
1mbps
2percentage
3pps
4default
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.22
esmPortBcastRateLimit
The value of the maximum broadcast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port speed.
It is mandatory to set esmPortBcastR…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.23
esmPortMcastRateLimitEnable
Enable/disable per port multicast traffic rate limit. When 'enable' value from
esmPortMcastRateLimit object will be applicable to the ingressing multicast traffic if
the speed is greater than the limit else the default …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.24
esmPortMcastRateLimitType
The unit applicable to the value in esmPortMcastRateLimit object.
Enumerationr/w
Enumerated Values:
1mbps
2percentage
3pps
4default
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.25
esmPortMcastRateLimit
The value of the maximum multicast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port speed.
It is mandatory to set esmPortMcastR…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.26
esmPortUucastRateLimitEnable
Enable/disable per port unknown unicast traffic rate limit. When 'enable' value from
esmPortUucastRateLimit object will be applicable to the ingressing unknown unicast traffic if
the speed is greater than the limit else…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.27
esmPortUucastRateLimitType
The unit applicable to the value in esmPortUucastRate object.
Enumerationr/w
Enumerated Values:
1mbps
2percentage
3pps
4default
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.28
esmPortUucastRateLimit
The value of the maximum unknown unicast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port speed.
It is mandatory to set esmPor…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.29
esmPortIngressRateLimitEnable
Enable/disable per port ingress traffic rate limit. When 'enable' value from
esmPortIngressRate object will be applicable to the ingressing traffic (BC, MC, UUC) if
the speed is greater than the limit else the default l…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.30
esmPortIngressRateLimit
The value of the maximum ingress traffic that can flow
through the port. The actual value depends on the port speed
if the configured value is greater than the current port speed.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.31
esmPortIngressRateLimitBurst
The value of ingress traffic burst size in Mbits.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.32
esmPortEPPEnable
use for port diagnostics
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.33
esmPortEEEEnable
10Gbase-T Energy Efficent Ethernet port parameter.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.34
esmPortIsFiberChannelCapable
The port can be configured as Fiber Channel interface (yes) or can
not be configured as Fiber Channel interface.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.35
esmPortBcastThresholdAction
The port can be configured to send trap/shutdown if
the threshold limit is crossed for Bcast Frames
Enumerationr/w
Enumerated Values:
1default
2trap
3shutdown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.36
esmPortMcastThresholdAction
The port can be configured to send trap/shutdown if
the threshold limit is crossed for Mcast Frames
Enumerationr/w
Enumerated Values:
1default
2trap
3shutdown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.37
esmPortUucastThresholdAction
The port can be configured to send trap/shutdown if
the threshold limit is crossed Unknown Unicast Frames
Enumerationr/w
Enumerated Values:
1default
2trap
3shutdown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.38
esmPortMinBcastRateLimit
The value of low threshold for bcast.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.39
esmPortMinMcastRateLimit
The value of low threshold for mcast.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.40
esmPortMinUucastRateLimit
The value of low threshold for uucast.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.41
esmPortBcastStormState
The state of the port for broadcast Storm Control.
Enumeration
Enumerated Values:
1normal
2storm
3trap
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.42
esmPortMcastStormState
The state of the port for multi-cast Storm Control.
Enumeration
Enumerated Values:
1normal
2storm
3trap
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.43
esmPortUucastStormState
The state of the port for uucast Storm Control.
Enumeration
Enumerated Values:
1normal
2storm
3trap
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.44

alcetherStatsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2 · 1 row entry · 45 columns
Open in standard view 
A list of Ethernet statistics entries.
alcetherStatsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1
A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named alcetherStatsPkts.1
Indexes
IF-MIBifIndex
Column Syntax OID
alcetherClearStats
Used to Clear all Statistics counters.
By default, this object contains zero value.
Enumerationr/w
Enumerated Values:
0default
1reset
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.1
alcetherLastClearStats
The value of SysUpTime at the time of all
the statistics counters are cleared.
By default, this object contains a zero value.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.2
alcetherStatsCRCAlignErrors
The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but but had either a bad
Frame Check Sequence (FCS) with an integral
nu…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.3
alcetherStatsRxUndersizePkts
The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.4
alcetherStatsTxUndersizePkts
The total number of packets transmitted that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.5
alcetherStatsTxOversizePkts
The total number of packets transmitted that were
longer than 1518 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.6
alcetherStatsRxJabbers
The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.7
alcetherStatsRxCollisions
The best estimate of the total number of collisions
on this Ethernet segment (in reception).
Only for Ethernet Interfaces.

The value returned will depend on the location of
the RMON probe. Section 8.2.1.3…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.8
alcetherStatsTxCollisions
The best estimate of the total number of collisions
on this Ethernet segment (in transmition).
Only for Ethernet Interfaces.

The value returned will depend on the location of
the RMON probe. Section 8.2.1…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.9
alcetherStatsPkts64Octets
The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.10
alcetherStatsPkts65to127Octets
The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.11
alcetherStatsPkts128to255Octets
The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.12
alcetherStatsPkts256to511Octets
The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.13
alcetherStatsPkts512to1023Octets
The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.14
alcetherStatsPkts1024to1518Octets
The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).
For both Ethernet and GigaEthernet.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.15
gigaEtherStatsPkts1519to4095Octets
The total number of packets (including bad
packets) received that were between
1519 and 4095 octets in length inclusive
(excluding framing bits but including FCS octets).
Only for GigaEthernet interfaces
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.16
gigaEtherStatsPkts4096to9215Octets
The total number of packets (including bad
packets) received that were between
4096 and 9215 octets in length inclusive
(excluding framing bits but including FCS octets).
Only for GigaEthernet interfaces
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.17
alcetherStatsPkts1519to2047Octets
The total number of frames(including error packets) received
that were between 1519 and 2047 bytes in length inclusive
(excluding framing bits but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.18
alcetherStatsPkts2048to4095Octets
The total number of frames(including error packets) received
that were between 2048 and 4095 bytes in length inclusive
(excluding framing bits but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.19
alcetherStatsPkts4096Octets
The total number of frames(including error packets) received
that were greater than or equal to 4096 bytes in length inclusive
(excluding framing bits but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.20
alcetherStatsRxGiantPkts
The total number of frames that are greater than the specified
Max length value, with a valid CRC, dropped because too long.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.21
alcetherStatsRxDribbleNibblePkts
The total number of frames for which a dribble nibble has been
received and CRC is correct.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.22
alcetherStatsRxLongEventPkts
The total number of frames for which the Carrier sense exceeds
50000 bit times for 10 Mbits/sec or 80000 bit times for
100 Mbits/sec.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.23
alcetherStatsRxVlanTagPkts
The total number of frames for which Type/Length field
contains the VLAN protocol identifier (0x8100).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.24
alcetherStatsRxControlPkts
The total number of frames that were recognized as control frames.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.25
alcetherStatsRxLenChkErrPkts
The total number of frames for which the frame length field value
in the Type/Length field does not match the actual data bytes
length and is NOT a type field.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.26
alcetherStatsRxCodeErrPkts
The total number of frames for which one or more nibbles were
signaled as errors during reception of the frame.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.27
alcetherStatsRxDvEventPkts
The total number of frames for which a RX_DV event (packet not
too long enough to be valid packet) has been seen before the
correct frame.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.28
alcetherStatsRxPrevPktDropped
The total number of frames for which a packet has been dropped
(because of too small IFG) before the correct frame.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.29
alcetherStatsTx64Octets
The total number of transmitted frames of 64 bytes.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.30
alcetherStatsTx65to127Octets
The total number of transmitted frames that were between
65 and 127 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.31
alcetherStatsTx128to255Octets
The total number of transmitted frames that were between
128 and 255 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.32
alcetherStatsTx256to511Octets
The total number of transmitted frames that were between
256 and 511 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.33
alcetherStatsTx512to1023Octets
The total number of transmitted frames that were between
512 and 1023 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.34
alcetherStatsTx1024to1518Octets
The total number of transmitted frames that were between
1024 and 1518 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.35
alcetherStatsTx1519to2047Octets
The total number of transmitted frames that were between
1519 and 2047 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.36
alcetherStatsTx2048to4095Octets
The total number of transmitted frames that were between
2048 and 4095 bytes in length inclusive (excluding framing bits
but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.37
alcetherStatsTx4096Octets
The total number of transmitted frames that were greater than
or equal to 4096 bytes in length and less than Max frame length
(excluding framing bits but including FCS bytes).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.38
alcetherStatsTxRetryCount
The total number of collisions that the frames faced during
transmission attempts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.39
alcetherStatsTxVlanTagPkts
The total number of transmitted frames for which Type/Length field contains the
VLAN protocol identifier (0x8100).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.40
alcetherStatsTxControlPkts
The total number of transmitted frames that were recognised as control frames.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.41
alcetherStatsTxLatePkts
The total number of late collisions that occured beyond the collision window.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.42
alcetherStatsTxTotalBytesOnWire
The total number of bytes transmitted on wire, including all bytes from collided
attempts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.43
alcetherStatsTxLenChkErrPkts
The total number of transmitted frames for which the frame length field value
in the Type/Length field does not match the actual data bytes length and
is NOT a Type field.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.44
alcetherStatsTxExcDeferPkts
The total number of frames that were deferred in excess of 6071 nibble-times
in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This
stat is only in case of Half duplex and excessive defer bit reset…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.2.1.45

esmHybridConfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3 · 1 row entry · 6 columns
Open in standard view 
A list of inactive hybrid port instances.
esmHybridConfEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1
A ESM Physical Port entry.
Indexes
IF-MIBifIndex
Column Syntax OID
esmHybridPortCfgSpeed
The configured port line speed of this ESM port.
Enumerationr/w
Enumerated Values:
1speed100
2speed10
3speedAuto
5speed1000
6speed10000
8speedMax100
9speedMax1000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.1
esmHybridPortCfgDuplexMode
The configured port duplex mode of this ESM port.
Note: GigaEthernet support only full-duplex.
Enumerationr/w
Enumerated Values:
1fullDuplex
2halfDuplex
3autoDuplex
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.2
esmHybridPortCfgAutoNegotiation
Allow the user to enable or disable the port auto negotiation.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.3
esmHybridPortCfgCrossover
Allow the user to configure port crossover.
Enumerationr/w
Enumerated Values:
1mdi
2mdix
3auto
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.4
esmHybridPortCfgFlow
This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode
object in dot3PauseTable. It is used to configure pause for fiber media.
Enumerationr/w
Enumerated Values:
1disable
2enabledXmit
3enabledRcv
4enabledXmitAndRcv
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.5
esmHybridPortCfgInactiveType
This object is only applicable to hybrid ports .
It indicates the configured inactive media type.
Enumeration
Enumerated Values:
1fiber
2copper
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.3.1.6

ddmInfoTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5 · 1 row entry · 25 columns
Open in standard view 
The ddmInfoTable has an entry for each SFP/XFP in the
system that supports Digital Diagnostic Monitoring (DDM). The table is
indexed by ifIndex. Each row in this table is dynamically added
and removed internally by the system based on the presence or absence
of DDM capable SFP/XFP components.
ddmInfoEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1
Each row represents a particular SFP/XFP that supports Digital
Diagnostic Monitoring.
Entries are created and deleted internally by the system.
Indexes
IF-MIBifIndex
Column Syntax OID
ddmTemperature
The value of ddmTemperature indicates the current temperature
of the SFP/XFP in 1000s of degrees Celsius.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.1
ddmTempLowWarning
The value of ddmTempLowWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.2
ddmTempLowAlarm
The value of ddmTempLowAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.3
ddmTempHiWarning
The value of ddmTempHiWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.4
ddmTempHiAlarm
The value of ddmTempHiAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.5
ddmSupplyVoltage
The value of ddmSupplyVoltage indicates the current supply
voltage of the SFP/XFP in 1000s of Volts (V).
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.6
ddmSupplyVoltageLowWarning
The value of ddmSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.7
ddmSupplyVoltageLowAlarm
The value of ddmSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.8
ddmSupplyVoltageHiWarning
The value of ddmSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.9
ddmSupplyVoltageHiAlarm
The value of ddmSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.10
ddmTxBiasCurrent
The value of ddmTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA).
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.11
ddmTxBiasCurrentLowWarning
The value of ddmTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.12
ddmTxBiasCurrentLowAlarm
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.13
ddmTxBiasCurrentHiWarning
The value of ddmTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.14
ddmTxBiasCurrentHiAlarm
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.15
ddmTxOutputPower
The value of ddmTxOutputPower indicates the current Output
Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.16
ddmTxOutputPowerLowWarning
The value of ddmTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.17
ddmTxOutputPowerLowAlarm
The value of ddmTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.18
ddmTxOutputPowerHiWarning
The value of ddmTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.19
ddmTxOutputPowerHiAlarm
The value of ddmTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.20
ddmRxOpticalPower
The value of ddmRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.21
ddmRxOpticalPowerLowWarning
The value of ddmRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.22
ddmRxOpticalPowerLowAlarm
The value of ddmRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.23
ddmRxOpticalPowerHiWarning
The value of ddmRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.24
ddmRxOpticalPowerHiAlarm
The value of ddmRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.5.1.25

ddmPortInfoTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6 · 1 row entry · 26 columns
Open in standard view 
The ddmPortInfoTable has an entry for each SFP/XFP in the
system that supports Digital Diagnostic Monitoring (DDM). The table is
indexed by ifIndex and port channel. Each row in this table is 
dynamically added
and removed internally by the system based on the presence or absence
of DDM capable SFP/XFP components.
ddmPortInfoEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1
Each row represents a particular SFP/XFP that supports Digital
Diagnostic Monitoring.
Entries are created and deleted internally by the system.
Indexes
IF-MIBifIndex ddmPortChannel
Column Syntax OID
ddmPortChannel
The channel number of the data that is being read. In the case
of a QSFP there will be 4 10 gigabyte channels, for SFP/XFP there
will only be one.
QSFP/SFP channel numberInteger32
Constraints:
range: 1-4
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.1
ddmPortTemperature
The value of ddmTemperature indicates the current temperature
of the SFP/XFP in 1000s of degrees Celsius.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.2
ddmPortTempLowWarning
The value of ddmTempLowWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.3
ddmPortTempLowAlarm
The value of ddmTempLowAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.4
ddmPortTempHiWarning
The value of ddmTempHiWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.5
ddmPortTempHiAlarm
The value of ddmTempHiAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a degree celciusInteger32
Constraints:
range: -200000--200000
range: -150000-150000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.6
ddmPortSupplyVoltage
The value of ddmSupplyVoltage indicates the current supply
voltage of the SFP/XFP in 1000s of Volts (V).
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.7
ddmPortSupplyVoltageLowWarning
The value of ddmSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.8
ddmPortSupplyVoltageLowAlarm
The value of ddmSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.9
ddmPortSupplyVoltageHiWarning
The value of ddmSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.10
ddmPortSupplyVoltageHiAlarm
The value of ddmSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a voltInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.11
ddmPortTxBiasCurrent
The value of ddmTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA).
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.12
ddmPortTxBiasCurrentLowWarning
The value of ddmTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.13
ddmPortTxBiasCurrentLowAlarm
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.14
ddmPortTxBiasCurrentHiWarning
The value of ddmTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.15
ddmPortTxBiasCurrentHiAlarm
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a milli-AmpereInteger32
Constraints:
range: -200000--200000
range: 0-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.16
ddmPortTxOutputPower
The value of ddmTxOutputPower indicates the current Output
Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.17
ddmPortTxOutputPowerLowWarning
The value of ddmTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.18
ddmPortTxOutputPowerLowAlarm
The value of ddmTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.19
ddmPortTxOutputPowerHiWarning
The value of ddmTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.20
ddmPortTxOutputPowerHiAlarm
The value of ddmTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.21
ddmPortRxOpticalPower
The value of ddmRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in 1000s of dBm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.22
ddmPortRxOpticalPowerLowWarning
The value of ddmRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.23
ddmPortRxOpticalPowerLowAlarm
The value of ddmRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
low-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.24
ddmPortRxOpticalPowerHiWarning
The value of ddmRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-warning.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.25
ddmPortRxOpticalPowerHiAlarm
The value of ddmRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a
hi-alarm.
A value of -200000 indicates this object is not applicable.
thousandth of a dBmInteger32
Constraints:
range: -200000--200000
range: -40000-10000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.6.1.26

alcfcStatsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7 · 1 row entry · 16 columns
Open in standard view 
A list of Fiber Channel statistics entries.
alcfcStatsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1
A collection of statistics kept for a particular
Fiber Channel interface. As an example, an instance of the
fcStatsPkts object might be named alcfcStatsPkts.1
Indexes
IF-MIBifIndex
Column Syntax OID
alcfcClearStats
Used to Clear all Statistics counters.
By default, this object contains zero value.
Enumerationr/w
Enumerated Values:
0default
1reset
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.1
alcfcLastClearStats
The value of SysUpTime at the time of all
the statistics counters are cleared.
By default, this object contains a zero value.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.2
alcfcStatsRxUndersizePkts
The total number of packets received that were
less than 36 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.3
alcfcStatsTxBBCreditZeros
The number of transitions in/out of the buffer-to-buffer
credit zero state.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.6
alcfcStatsRxBBCreditZeros
The number of times RX BBCredit drops to zero.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.7
alcfcStatsLinkFailures
The number of link failures.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.8
alcfcStatsLossofSynchs
The number of loss of word-sync detected.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.9
alcfcStatsLossofSignals
The number of loss of signals detected.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.10
alcfcStatsPrimSeqProtocolErrors
The number of primitive sequence protocol errors detected.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.11
alcfcStatsInvalidTxWords
The number of invalid transmission words. This includes
invalid ordered sets and invalid data words.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.12
alcfcStatsInvalidCRCs
The number of frames received with an invalid CRC.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.13
alcfcStatsInvalidOrderedSets
The number of invalid ordered sets received at this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.14
alcfcStatsFrameTooLongs
The number of frames received at this port for which the
frame length was greater than what was agreed to in
FLOGI/PLOGI.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.15
alcfcStatsDelimiterErrors
The number of invalid delimiters received
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.16
alcfcStatsEncodingDisparityErrors
The number of detected running disparity at 10b/8b level.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.17
alcfcStatsOtherErrors
The number of errors detected but not counted by any other
error counter. This only includes RX frames drops due to zero
RX BBCredits
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.7.1.18

esmTdrPortTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8 · 1 row entry · 14 columns
Open in standard view 
The table lists the results of cable diagnostics.
esmTdrPortEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1
An entry corresponding to each port.
Indexes
IF-MIBifIndex
Column Syntax OID
esmTdrPortCableState
State of a cable as returned by the TDR test.
CableState
Textual Convention: CableState Enumeration
Type Values:
1ok
2open
3short
4openShort
5crossTalk
6unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.1
esmTdrPortValidPairs
The number of wire pairs in the cable for which the results of this test are valid.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.2
esmTdrPortPair1State
The state for wire pair-1 of the cable as returned by the TDR test.
CableState
Textual Convention: CableState Enumeration
Type Values:
1ok
2open
3short
4openShort
5crossTalk
6unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.3
esmTdrPortPair1Length
The length for wire pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.4
esmTdrPortPair2State
The state for wire pair-2 of the cable as returned by the TDR test.
CableState
Textual Convention: CableState Enumeration
Type Values:
1ok
2open
3short
4openShort
5crossTalk
6unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.5
esmTdrPortPair2Length
The length for wire pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.6
esmTdrPortPair3State
The state for wire pair-3 of the cable as returned by the TDR test.
CableState
Textual Convention: CableState Enumeration
Type Values:
1ok
2open
3short
4openShort
5crossTalk
6unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.7
esmTdrPortPair3Length
The length for wire pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.8
esmTdrPortPair4State
The state for wire pair-4 of the cable as returned by the TDR test.
CableState
Textual Convention: CableState Enumeration
Type Values:
1ok
2open
3short
4openShort
5crossTalk
6unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.9
esmTdrPortPair4Length
The length for wire pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.10
esmTdrPortFuzzLength
The error in the estimated length of the cable (as returned by TDR test).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.11
esmTdrPortTest
Object used to start a TDR test on the port. When configured as on, it initiates a TDR test on the port. A read operation on this object always returns the value off.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.12
esmTdrPortClearStats
Used to Clear TDR stats.
By default, this object contains zero value.
Enumerationr/w
Enumerated Values:
1default
2reset
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.13
esmTdrPortResult
Used to give the status of BCM API,whether API able to execute TDR test successfully or failed to executethe TDR test.
Enumeration
Enumerated Values:
1success
2fail
3unknown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.8.1.14

esmPortModeTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9 · 1 row entry · 2 columns
Open in standard view 
A list of interface entries.  This table contains
Configured Port mode and operational port mode
esmPortModeEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1
An entry containing additional management information
applicable to a particular interface with respect to port mode
Indexes
IF-MIBifIndex
Column Syntax OID
esmConfiguredMode
The desired mode of the interface. When a
managed system initializes, all interfaces start with
ifConfiguredMode in the Auto state.
User is not allowed to configure this parameter for subport
Enumerationr/w
Enumerated Values:
1mode40Gig
2mode4X10Gig
3modeAuto
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.1
esmOperationalMode
Operational mode of the port
Enumeration
Enumerated Values:
1mode40Gig
2mode4X10Gig
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.9.1.2

esmPortBeaconTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10 · 1 row entry · 4 columns
Open in standard view 
A list of interface entries.  This table contains
Beacon Admin State Beacon Led Color and Beacon Led mode
esmPortBeaconEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1
An entry containing additional management information
applicable to a particular interface with respect to Beacon
Indexes
IF-MIBifIndex
Column Syntax OID
esmBeaconAdminState
The beacon admin state of the interface. When a
managed system initializes, all interfaces start with
esmBeaconAdminState in disable state
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.1
esmBeaconLedColor
Beacon Led Color of the port
Enumerationr/w
Enumerated Values:
1ledOff
2ledBlue
3ledGreen
4ledAqua
5ledRed
6ledMagenta
7ledYellow
8ledWhite
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.2
esmBeaconLedMode
Beacon Led Mode of the port
Enumerationr/w
Enumerated Values:
1ledModeSolid
2ledModeActivity
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.3
esmBeaconRowStatus
Row status to control creation/deletion of the Beacon
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.10.1.4

portViolationTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1 · 1 row entry · 10 columns
Open in standard view 
This table contains the port Violations per port.
portViolationEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1
Port Violation Entry. The entries in this table are indexed
by 3 units,
1. ifIndex of the port for which the violation is set
2. source of the violation, the feature or module
3. reason for the violation (sub reason und…
Indexes
portViolationIfIndex portViolationSource portViolationReason
Column Syntax OID
portViolationIfIndex
The IfIndex of the port that has a violation.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.1
portViolationSource
Indicates the source of the port violation.
The source is the feature or module that has
caused the violation. The list is given below
1. Initiated by Access Guardian
2. Initiated by QOS Policy
3. Initiated by Net Sec
4…
Enumeration
Enumerated Values:
1ag
2qos
3netsec
4udld
5nisup
6oam
8lfp
9lm
10lbd
11spb
12storm
13stormuucast
14lldp
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.2
portViolationReason
The Reason for the port violation. This will be application
specific. The Reason indicate the violation for the 1st Violation
that happened on this port.
Enumeration
Enumerated Values:
1pvSLLpsShutDown
2pvSLLpsRestrict
3pvQosPolicy
4pvQosSpoofed
5pvQosBpdu
6pvQosBgp
7pvQosOspf
8pvQosRip
9pvQosVrrp
10pvQosDhcp
11pvQosPim
12pvQosIsis
13pvQosDnsReply
14pvUdld
15pvOamRfp
16pvAgLpsDiscard
17pvLfpShutDown
18pvLmThreshold
19pvLbd
20pvQosDvmrp
21pvSpbRfp
22pvEsmStorm
23pvEsmStormUucast
24pvLldpShutDown
25pvRemoteLbd
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.3
portViolationAction
The action determines on violation, what action will
taken. Either the port would be shutdown or Admin Down
or wait for the timer to expire and the timerAction
will determine what needs to be done.
Enumeration
Enumerated Values:
1portDown
2portAdminDown
3portTimerDown
4portTimerAdminDown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.4
portViolationTimer
If any timer is associated with the violation
This is Zero if no timer is associated.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.5
portViolationTimerAction
The Timer related action.
If set to portDownAfterTimer, no operation will be performed on
the port and the port will be shutdown after timer expiry.

If set to portUpAfterTimer the port will be shutdown im…
Enumeration
Enumerated Values:
0portNoTimerAction
1portDownAfterTimer
2portUpAfterTimer
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.6
portViolationClearPort
When this MIB object is set all violation on the
given port will be cleared. The Indices portViolationSource and
portViolationReason should be set to 0
Enumerationr/w
Enumerated Values:
0inactive
1set
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.7
portViolationCfgRecoveryMax
The maximum attempts for auto-recovery as configured for the ifindex in alaPvrRecoveryMax.
Value 0 means auto recovery is disabled for this port.
Value -1 means auto recovery will retry infinitely.
Integer32
Constraints:
range: -1-50
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.8
portViolationCfgRetryTime
The time (in seconds) between auto-recovery attempts as configured for the ifindex in alaPvrRetryTime.
secondsInteger32
Constraints:
range: 30-600
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.9
portViolationRetryRemain
The number of remaining auto-recovery attempts.
Value -1 means there are infinite retries remaining.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.1.1.10

alaLinkMonConfigTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2 · 1 row entry · 6 columns
Open in standard view 
A list of Link Monitoring Configuration Parameters
alaLinkMonConfigEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1
A collection of Link Monitoring configurations kept for a particular
Ethernet interface.
Indexes
IF-MIBifIndex
Column Syntax OID
alaLinkMonStatus
Allows the user to enable or disable Link Monitoring on the port.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.1
alaLinkMonTimeWindow
Indicates the number of seconds the Link will be monitored for a port.
Integer32r/w
Constraints:
range: 10-3600
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.2
alaLinkMonLinkFlapThreshold
Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown.
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.3
alaLinkMonLinkErrorThreshold
Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost …
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.4
alaLinkMonWaitToRestoreTimer
Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored.
Integer32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.5
alaLinkMonWaitToShutdownTimer
Indicates the number of milli seconds after which the link down event is notified to other applications. The timer is started whenever a Link down is detected on a port being monitore…
Integer32r/w
Constraints:
range: 0-3000
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.2.1.6

alaLinkMonStatsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3 · 1 row entry · 10 columns
Open in standard view 
A list of Link Monitoring Statistics
alaLinkMonStatsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1
A collection of Link Monitoring statistics for a particular Ethernet interface.
Indexes
IF-MIBifIndex
Column Syntax OID
alaLinkMonStatsClearStats
Used to Clear all Statistics counters.
The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port.
By default, this object contains zero value.
Enumerationr/w
Enumerated Values:
1default
2reset
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.1
alaLinkMonStatsPortState
Indicates the status of the port.
up(1) means the port is physically up,
down(2) means the port is physically down,
shutdown(3) means the interface is shutdown because of excessive link flaps or li…
Enumeration
Enumerated Values:
1up
2down
3shutdown
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.2
alaLinkMonStatsCurrentLinkFlaps
Indicates the number of Link flaps in the current time window.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.3
alaLinkMonStatsCurrentErrorFrames
Indicates the number of error frames in the current time window.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.4
alaLinkMonStatsCurrentCRCErrors
Indicates the number of CRC errors in the current time window.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.5
alaLinkMonStatsCurrentLostFrames
Indicates the number of Rx Lost frames in the current time window.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.6
alaLinkMonStatsCurrentAlignErrors
Indicates the number of Rx alignment frames in the current time window.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.7
alaLinkMonStatsCurrentLinkErrors
Indicates the sum of all the MAC Errors within the current time window.
i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors,
alaLinkMonCurrentLosFrames,…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.8
alaLinkMonStatsTotalLinkFlaps
Indicates the total number of link flaps across all the time windows.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.9
alaLinkMonStatsTotalLinkErrors
Indicates the total number of link errors across all the time windows.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.3.1.10

alaLFPGroupTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4 · 1 row entry · 5 columns
Open in standard view 
A list of Link Fault Propagation Grooups and their status
alaLFPGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1
The list of Link Fault Propagation group id and status for each group
Indexes
alaLFPGroupId
Column Syntax OID
alaLFPGroupId
Indicates the unique group id for Link Fault Propagation (LFP).
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.1
alaLFPGroupAdminStatus
Indicates the admin status of the group. disable(2) means link fault propagation,
is disbaled. enable(1) means link fault propagation is enabled
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.2
alaLFPGroupOperStatus
Indicates the operational status of the group. down(2) means all the source ports are down,
up(1) means atleast one source port in the group is up.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.3
alaLFPGroupWaitToShutdown
0 - Disable wait to shutdown timer
5 - 300 - after expiry of this timer all destination ports will be shutdown
Integer32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.4
alaLFPGroupRowStatus
Row Status for initiating a MIB retrieval request.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.4.1.5

alaLFPConfigTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5 · 1 row entry · 3 columns
Open in standard view 
A list of Link Fault Propagation port and port type of each LFP group
alaLFPConfigEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1
A list of Link Fault Propagation port and port type of each LFP group
Indexes
alaLFPGroupId alaLFPConfigPort
Column Syntax OID
alaLFPConfigPort
Indicates ifindex of source/destination port for a LFP Group.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.1
alaLFPConfigPortType
Indicates the type of port, (1) means the port is destination port and
(2) means the port is a destination port for a LFP Group.
Enumerationr/w
Enumerated Values:
1destination
2source
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.2
alaLFPConfigRowStatus
Row Status for initiating a MIB retrieval request.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.5.1.3

alaPvrConfigTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7 · 1 row entry · 2 columns
Open in standard view 
A list of auto violation recovery configuration parameters
alaPvrConfigEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1
Auto violation recovery configuration parameters
Indexes
IF-MIBifIndex
Column Syntax OID
alaPvrRecoveryMax
Per port maximum auto violation recovery maximum attempts.
Value -2 means use value from alaPvrGlobalRecoveryMax
Value -1 means retry infinitely.
Value 0 means disable this port.
Values 1 to 50 mean 1 to 50 auto violat…
Integer32r/w
Constraints:
range: -2-50
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1.1
alaPvrRetryTime
Per port time (in seconds) between auto violation recovery attempts.
Value -2 means use value from alaPvrGlobalRetryTime.
secondsInteger32r/w
Constraints:
range: -2--2
range: 30-600
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.5.7.1.2

interfaceStatsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1 · 1 row entry · 6 columns
Open in standard view 
Expansion for ifEntry.
interfaceStatsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1
An entry of interfaceStatsTable
Indexes
No indexes recorded
Column Syntax OID
inBitsPerSec
The average number of Bits Received per second
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.1
outBitsPerSec
The average number of Bits Transmitted per second
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.2
ifInPauseFrames
The average number of Pause Frames Received per second
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.3
ifOutPauseFrames
The average number of Pause Frames Transmitted per second
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.4
ifInPktsPerSec
The average number of Packet Received per second
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.5
ifOutPktsPerSec
The average number of Packets Transmitted per second
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.7.1.1.6

alcLagStatsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1 · 1 row entry · 1 columns
Open in standard view 
A list of Link Aggregation statistics entries.
alcLagStatsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1.1
A collection of statistics kept for a particular
Link Aggregation interface. alclnkaggAggIndex is defined
in alclnkaggAggTable; it is of SYNTAX InterfaceIndex
(aka ifIndex) starting at value 40000001 for link agg 1.
Ind…
Indexes
ALCATEL-ENT1-LAG-MIBalclnkaggAggIndex
Column Syntax OID
alcLagClearStats
Used to Clear all Link Aggregation Statistics counters. New stats collection starts immediately.
No meaningful read on this object.
Enumerationr/w
Enumerated Values:
0none
1reset
 .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.9.1.1.1